Sears Wood Lathe

No shipping ! Comes apart in approx 6 pieces. Bring help to take apart and remove. NO SHIPPING

Approx 36" from head to tailstock. Dollys are also included. Bring proper help, equipment, and tools to load. NO SHIPPING

No shipping ! Bring help to remove.

Takes approx 36" Stock. Approx 41" to table, tool rest is 12". No shipping ! Bring proper help and equipment to load.

Marklin German Cast Iron Wood Lathe

46" from cutter to tailstock. Approx 6 1/2" from center of cutter to table. NO SHIPPING ! Bring proper help & equiment to load

Homemade bench with lathe attached. Model 113.249070. Working. 57" wide X 22" deep X 42-1/2" high. Has extra parts. MG. IMPORTANT: Before bidding, please read the terms and conditions. When you regist

Table is approx 6 3/4" x 84 1/2". Legs are approx 24" x 30 1/2" tall. Howell motor is also included ( sold untested and not guaranteed to fit). Photographed upside down. No shipping, bring help to loa

Would take approx 60" long stock. Overall measurements are approx 24" x 92" x 47" tall. Buyer to bring help to remove. This is located in the living room. Will need to be taken down 5 steps. Buyer res

Cummins 1000m/m wood lathe. Tested and working. Approx 57x14x8 inches.

ARTIST: Tony Lodewyk George Offermans (Netherlands, 1854 - 1911) NAME: Man Using Wood Lathe MEDIUM: oil on canvas CONDITION: Relined. Restretched. Craquelure. Some small scattered inpaintings/touch up

Angel Figure painted wood lathe construction by Richard Faralla, 1971. 29.5" H x 3.5" D.

Abstract acrylic on canvas depicting three women on a beach with chairs and umbrella. Signed bottom right "H. Fussiner" and again twice on verso with title. [Art: 30" x 40"]. In a wood lathe frame. So

A Robert F. Lyon (American, 1894-1978) plaster and wood slat standing sculpture titled 'Wall' consisting of geometrically aligned parallel wood lathe slats held together by cracked plaster in a bipeda

Geometric abstract, signed bottom right "Cabral Santos / 73". [Art: 33 3/4" x 34"] in wood lathe frame. Light soiling and dent impression at upper right quadrant.

This group of antique and vintage tools includes 3 wood lathes, 2 metal lathes, a spiral ratchet screwdriver in it's original box, an old wood thermometer, interesting ornate cast iron level, square,

1792 1ed Tourneur FURNITURE Lathe Wood Working Carpentry Machinery ‘Manuel du Tourneur’ by Louis-Georges Salivet is the definitive, most important 18th-century work on the lathe. Also known as Ber

(New Mexico/Kentucky, 1915-2001) tulip poplar burl wood bowl, lathe turned, signed and dated "Rude Osolnik/North Carolina/'1993", approximately 5-1/2 x 15 in. Provenance: Collection of Rude Osolnik, B

(New Mexico/Kentucky, 1915-2001) burl walnut wood bowl, lathe turned, signed and dated on base "Osolnik Originals" and "'84", with wood type, 7-3/8 x 8-1/2 in. Provenance: Collection of Rude Osolnik,

1985 - Theo Fabergé #481Swag Egg with signatureThe Swag Egg represents Theo Fabergé's skill with both wood and lathe. It is made of cocobolo wood encircled with swags and mounted with the Russia

(Canadian, 1920?2006) birch wood vase, lathe turned and decorated with leopards, pierced designs, signed and dated on base "Frank Sudol/2001", 13-1/4 in. Provenance: Collection of Rude Osolnik, Berea,

(New Mexico/Kentucky, 1915-2001) box elder wood bowl, lathe turned, incised "Box Elder/Osolnik/94?", 5-1/2 x 5-1/2 in. Note: This lot is accompanied by an original catalog from the exhibition Rude and

Lathe is approx 59" total length. Cabinet is approx 18" x 72" x 33". No shipping ! Buyer to bring proper help / equipment to load !

Trio of Painted Wood Pedestals with Lathe-Turned Urns the blue and gray bases with molded edges, the sides paneled and set with ogee-molded trim, the urns of campana form. h. 66", w. 15-1/2", d. 15-1/