Two steam engines and one feed pump.

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY VERTICAL V10 MODEL STEAM ENGINE AND FEED WATER PUMP,cast-iron, steel, and brass, base fitted with two tabs for securing base and some po

One is a No. 37 with force pump on a hand painted metal base. Two others, one on footed base and one on hand painted base. Some paint loss and wear to bases, all have original stacks. Condition: (Very

Two Marx Tin New York Central Freight Electric Train Sets, lot consists of two silver and black steam engines (one missing drive rods), two NYC tenders, and eight assorted tin litho freight cars, "O -

MäRKLIN steam engine model, with dynamo and feed pump, lying boiler, surface area 35x34 cm, burner, water level glass, manometer, pipe, regulator of centrifugal force, funnel, boiler diameter: 8 cm,

including two model steam engines with accessories; smaller one marked on top "Wurtlemberg", and larger one marked on top with what appears to read as "DC" h. 16-3/4 w. 11-1/4 d. 12-1/2 in. (largest)

including two model steam engines with accessories; smaller one marked on top "Wurtlemberg", and larger one marked on top with what appears to read as "DC" h. 16-3/4 w. 11-1/4 d. 12-1/2 in. (largest)

Two early 20th century Weeden model steam engines (one missing water gauge). largest measuring 9 inches high x 9 x 6. As shown.  Items are sold as is. Please inquire about condition if not otherwise

4 Toy Steam Engines 1) Ernst Plank, horizontal steam engine with dynamo, boiler heavily modified, with additional manual feed pump, converted to gas heating, without chimney, dimensions of the basepla

"Rough" Includes Steam Engine. One gauge

Two 19th century iron and brass toy working steam engines. One iron and brass working steam engine with stenciling. 6.25"l x 6"w x 4.75"h. One iron and brass working steam engine. 7"l x 5.75"w x 5.75"

WILESCO big steam engine, 2 cylinders, with manometer and revcounter, surface area 52x42 cm, boiler with a diameter of: 10 cm, with feed pump, dynamo and lamps, mounted on a wooden board, with transmi

ERNST PLANK EXCELSIOR, standing steam engine, 35 cm, base casting, handpainted, brass boiler, burnished, with feed pump, burner, manometer, glass is cracked, water level glass, whistle, funnel, optica

MÄRKLIN lying steam engine, surface area 29.5 x 33 cm, boiler with a diameter of: 5.5 cm, old Märklin symbol, water level glass, pipe, original burner, dynamo, feed pump, good condition German Descr

DOLL steam engine, Ref. 407/3 (1925-1927), lying boiler, surface area: 41x25.5 cm, with burner, funnel, pipe, manometer, feed pump, dynamo, lamp, lampshade is missing, base plate was colorwise retouch

BING steam engine, lying boiler, surface area, sheet metal, lithographed, mounted on a wood base, 23.5x27.5 cm, boiler with a diameter of: 5.5 cm, with burner, water level glass, pipe, feed pump, tech

Display of Steam Engine Components, c. 1980 "Steam Age", approx. 150 parts, with stopcocks, three-way connections, manometers, steam whistles, oil pumps, water level glasses, feed pumps and many other

Working Model of a Traction Engine with Dynamo, c. 1980 Probably England, single-cylinder steam engine, for spirit heating, fusee-and-chain steering, feed pump, steam whistle, water level glass, manom

JEP Prewar O gauge steam freight train. There is a mechanically powered 0-4-0 steam engine, two (2) staked flat cars (one car is missing a coupler), and an LR hopper car with coal load. Metal construc

This lot is for a pair of O27 Lionel locomotives with coal cars. One No. 1666 prairie steam engine and one No. 1001.

Lot of two early American made Weeden stationary steam engines, both vertical type. One includes funnel pan, both have original burners, one is mounted on wood board and the other is a very unusual ea

Total of five items including one Mamod Made in England red steam engine 7 1/2" x 10" x 8", two other steam engines 11" x 12" x 10" and 12 1/2" x 8" x 6", Goodrich Silvertown Tires tow truck, and roll

DESCRIPTION: Five upright steam engine toys. Two marked with Weeden decal, one stamped Wilesco, one stamped J.F., and last unmarked. MEASUREMENTS: Various. Ranges from 9" to 12-1/2". CONDITION: Corros

American Flyer S gauge steam freight train. There is a 21105 4-4-2 steam engine and tender (one truck on the tender must be reattached), two (2) 42597 CNW flat cars (each is missing part of one couple

Two (2) HO scale 4-4-0 steam engines and tenders plus a train casting kit in the original box. There are two (2) powered Rivarossi (we think they are Rivarossi) engines and tenders. One is a Virginia