VICTOR TALKING MACHINE TYPE "E" TOGETHER WITH OAK STAND

Victor Type E Talking Machine. Oak case with front plaque. Serial 52157 Camden NJ. Unknown working condition, missing crank possible other pieces. Chips to wood, wear, worn, used condition.

Early 20th C. with a large collection of records. Surface distress, wear, not tested for working condition. 5'2-1/2"h

Victor Type III Victrola Phonograph. Oak case with large horn. Horn is approx. 16-1/2" diameter, original decal present on horn. Horn shows wear with scuffs/scratches and some ding/dents. Serial No. 3

C. 1915. Victor Talking Machine Co. Camden NJ. This is a wonderful example of a Victor Talking Machine type 1 phonograph in quartered oak cabinet and matching quartered oak horn. CONDITION: Showing an

SN - 17558. Two spring Victor motor with a seven inch platter in a refinished case. It uses an "Exhibition" long throat reproducer. The horn measures 14 - 3/4 long by 9 - 3/4" diameter. the travel arm

Type E. Original paper label on bottom of case. Measures 11 in. x 11 in./ at base x 14 in. wide with arm x 10 in. tall. Weighs 16 lbs. If lot is absent of a condition report one may be requested via e

Victor Model E Talking Machine, Victrola, in oak, with brass & black painted horn, base is 11" by 11", working condition.

Victor Type-M Victrola. Oak case with brass horn, has original Victor Talking Machine decal on horn and brass tag with serial No. 48141. No crank handle present. Untested. Large horn shows some wear t

Victor Talking Machine Victrola in Oak Table Top Case VV-IX 332056; together with an oak two-door music cabinet Used condition, wear, worn, victrola cranks but table top does not turn. Victrola: 14-1/

Antique Victor Talking Machine Co. Phonograph Type VIC III. Good working condition with use and age wear. Comes with a 19" diameter horn and the crank, needs a needle. Overall the oak phonograph case

Victor Talking Machine Co., Model E, ("Monarch Junior", made 1901-1908) s/n 47551, with oak case, green felt 7" turntable, double-spring motor, rigid arm with black and silver horn, includes original

Enclosed in oak case, complete with Victor talking machine horn.

Victor Talking Machine Company Model VV-IV Victrola, Early 20th C., H 11'' W 13'' Depth 17'' Oak case. Made in Camden, New Jersey. Internal horn model VV-IV Victrola. Serial number 176338 E. Bearing a

Model No. VV-IX. Serial No. 300894 G. Oak case with record compartment. In working condition. Music player is separate from stand. Right side stand door is off center. 50"h x 19"w x 23"d **Please Note

This machine in its attractive oak cabinet has been refinished. Has all its corner columns and capitals and is in overall good condition. This machine in its early rigid arm format has all its origina

Nice all original machine in original oak finish cabinet, front mount. Wooden tone arm. Standard sound box. Very nice original 14" black and brass bell horn with very good original paint and very nice

Mahogany with gilt metal elements and a wooden horn, marked, "VN06, 678". With 100 to 200 records or various type and period. The table pictured is not part of the lot. Dimensions:The horn is 21 3/4"

Victor Talking Type IV Victrola Phonograph. Mahogany cased, approx. 14" x 14" x 8-1/2". No horn present. Includes crank key, however when wound, did not work. Serial No. appears to be 43646. Shows wea

untested, 28" tall X 28" wide, horn is possibly bent at top edge

Vintage Free Westinghouse Sewing Machine Type E. Together with a Vintage Singer Sewing Machine #1295663. Both in used untested condition, both do turn by hand.

Antique Victor Gramophone Talking Machine Type V, Model 5 Wood Horn. Tested and is functional. May need a bit of servicing. Cone is wooden and a plaque indicates that it came from the Bergstrom Music

An American, ca.1890-1910 quarter sawn oak floor model Victrola. Fitted storage complete with hand crank and approximately 20 records. Measuring approx 43" tall x 19" wide x 22" deep. Good working con

Very nice Victor Talking Machine Victrola #III / wonderfull quarter sawn Spearpoint Oak horn / Nice pinstripping on cast iron / Measures: 12"H x 14"W x 14"D - Horn: 21.5" diameter, 24" long / Conditio

21 3/4" DIA. WITH 1 1/2" ELBOW FITTING, SMALL PANEL SEPARATION - SEE PHOTO