Rare and Early Harry Bertoia for Knoll Bench

A wonderful and handsome Harry Bertoia bench or coffee table for Knoll Made of solid walnut and iron15.5\"H 82\"L 18.25\" D

Genuine Mid-Century wire ottoman or footstool designed by Harry Bertoia for Knoll, in black paint finish with rare early double-wire frame. Pairs easily with the Bird or Diamond chair. Dimensions: H 1

H Base. Fully Upholstered. Early & RARE Pre-production.Measures 28"L x 34"W x 16"SH x 30"H

Vintage bench slatted in the manner of a Harry Bertoia Knoll bench. Heavy black metal base. Apparently unmarked. Dimensions: H 18" x W 62.75" x D 15.5" Condition: Very minor surface wear.

Harry Bertoia - Knoll Slat Bench. Dimensions 15.5x82x18.5

Harry Bertoia (1915-1978) for Knoll Associates slat bench New York, New York, 1952 lacquered ash, enameled steel Knoll sticker label 82"w x 18"d x 15 1/2"h

Enamel Steel Legs. From a Westport, CT estate. - Dimensions: 72" w x 18.75" d x 15.5" h.

Description - Harry Bertoia for Knoll slat bench. Dimensions - 15" x 72" x 18"

1972 HARRY BERTOIA KNOLL INTERNATIONAL BENCH, BLACK FINISH METAL FRAME, WITH ORIGINAL KNOLL INTERNATIONAL LABELS, MODEL 424 ON A SLED BASE

1972 HARRY BERTOIA KNOLL INTERNATIONAL BENCH, BLACK FINISH METAL FRAME, WITH ORIGINAL KNOLL INTERNATIONAL LABELS, MODEL 424 ON A SLED BASE

Description - One early Harry Bertoia for Knoll bar stool. Dimensions - 42" x 21" x 19"

The Signed Knoll Bench does have some Nicks, a few Scratches, and a Small Divot to the Ebony-Colored Wood, but it is in Overall Good Condition. The Chrome Portions look Flawless. The Bench measures 15

Circa 1970s, oak slatted seat on enameled steel frame, with Knoll label on underside h. 15-1/2 w. 66 d. 18 in. Provenance: Private collector, Pound Ridge, NY Harry Bertoia (Italian-American, 1915-1978

A Harry Bertoia for Knoll slat bench. Signed on leg. Dimensions : 15 x 72 x 15.5. All measurements are in inches. Height x Width x Depth

HARRY BERTOIA FOR KNOLL INTERNATIONAL WOOD SLAT & STEEL BENCH: Harry Bertoia (Italian/American, 1915-1978) Slat Bench for Knoll International, white painted Wood on a Steel frame. Approx. 15.5" h x 72

Harry Bertoia slat bench Knoll InternationalUSA, 1952 / c. 1965ash, enameled steel15.5 h × 66 w × 18.25 d in (39 × 168 × 46 cm) Literature: Knoll

Harry Bertoia (1915-1978) Slat Bench Knoll International, USA lacquered ash, enameled steel with partial manufacturer's label H 15 1/2 x W 54 x D 18 1/4 inches This lot is located in Chicago. Property

Dimensions: H 16” x W 60” x D 15.5” Condition: Some surface wear. Few pieces slightly loose, does not seem to affect sturdiness.

Harry Bertoia (Italian/American, 1915-1978) Slat Bench for Knoll International, Ebonized Wood and Chrome, 15-1/2" H, 72" W, 18-1/2" D. Slats have scratches consistent with age & use; (2) heavier scrat

Harry Bertoia (Italian/American, 1915-1978) Slat Bench for Knoll International, Ebonized Wood and Chrome, 15-1/2" H, 72" W, 18-1/2" D, There is light pitting on the metal legs. Also, some light scratc

Harry Bertoia (Knoll International) walnut and enameled steel bench 15.75"h x 66"l x 18.5"d Condition: minor scratches, dents

Slat bench, New York, 1970s; Enameled steel, oak; Unmarked; 16" x 66" x 18 1/4"

Nice pair of vintage Knoll Harry Bertoia white diamond chairs. This pair retain their original yellow chair covers in nice condition. They both also have early Knoll label measurement-30"t x 33"w x 28

Harry Bertoia, Italy (1915-1978). Bench designed by Harry Bertoia for Knoll has teak slats and black iron legs, circa 1960's. Measures 15.5"H x 18.25"W x 66"L. Condition report: good condition, see ph