Diesel Locomotive Bell and Yoke

The brass or bronze bell mounted in an iron stand is stamped 7 1 2 S 7 1 around the top and embossed SALEM 506 on the clapper which is also lettered DOUBLE ACTING. Measures 25 x 27 x 18 inches. The be

Brass Air Powered Diesel Locomotive Bell - 12 3/4" diameter Bell is equipped with a Graham White double acting ringer. Bell shows minor dents and wear at the edge, but no major damage. The mount appea

Unmarked 12" x 16" tall

This is a Baltimore and Ohio Railroad brass bell from a diesel locomotive. Bell has been mounted on several boards so as to allow for operation. Comes with the eagle top that was on some of the loco b

Bronze diesel train locomotive bell, marked "EMD" and "8004150" height 17 in. x width 11 in. x depth 11 in. Provenance: a Rockport, Texas collection Condition: Missing clapper We happily provide

Steam Locomotive bell with cast iron yoke. Bell measures 14" high and base diameter of 16". Wonderful tone when rung. These bells ae always made of an alloy specific to bells, designed to provide that

Large Train Bell. Marked 8044623 REVA, EMD 8004156. Approximately 14 in. X 12 in.

EMD diesel locomotive steel bell with a 12" diameter. No clapper or air motor, bell only. See photos for best description.

Lionel O Gauge Post War 624 Chesapeake & Ohio Diesel Locomotive. Antenna, bell, stacks, horn, hand rails and window struts intact. Paint has edge wear.

Lionel Postwar Number 625 Lehigh Valley red/black Diesel Switching Locomotive. Bell, handrails, steps, struts, trucks and couplers are intact. Edge scuffs in black paint.

Lionel postwar O gauge 602 Seaboard NW2 diesel locomotive.: Horn, bell, stacks, hand rails, trucks and coupler intact. Dusty. Rust spots on pickups.:

Lionel Post War Numbere 627 Lehigh Valley 44 Ton Diesel Locomotive. Horn, bell, end railings, steps, trucks and couplers are intact but have slight corrosion. White striping has wear.

Nice condition Antique steam locomotive 12" bell with cast iron yoke. The bell measures 12" in diameter x 10" tall, the yoke measures 25" tall x 18" across and is maked 26421 & 4956.

Antique steam locomotive 16-1/2" bell with cast iron yoke. The bell measures 16-1/2" in diameter x 14" tall, the yoke measures 32" tall x 24-1/2" across overall.

A large steam locomotive bell. It has a 17" diameter and the actual bell is 12" high. The cast iron yoke has 2 casting marks: base has 65697 (note "5" is upside down), top has 24139. I did find any sh

Lionel post war O Gauge 6220 Santa Fe NW2 Switcher Diesel Locomotive.: Marker lights, antenna, bell, horn, stacts, hand rails, trucks and couplers intact. Very dirty.:

Lionel 6250 Seaboard Diesel Switching Locomotive. Marker Lights, Bell, Horn, Stacks, Steps, Trucks and Couplers are intact. Radio Antenna has bent center post. Some hood side handrail cotter pins miss

A flat mount bell that measures 9" high by 12" diameter. Bells in general are not brass or bronze but a "bell" metal that is a mixture of metals. The total height with yoke is 22". One side arm has a

Look past the paint! The yoke has HOWARD cast twice: once up top and larger on the base. The bell measures 9" high by 12" diameter. The total height with yoke is 19". It has both a pull arm and a air

Lionel O gauge Modern Era 8111 Detroit toledo and Ironton NW - 2 Diesel Locomotive, orange with horn and bell, with Lionel Lines tanker car, no. 6465 and caboose, no. 6057, both orange. Condition; eng

Lionel postwar O parts to include Alco diesel locomotive motor fields, two 2403 bell mechanisms and gears. Sold as-is as seen in the photos with no returns.

Called the Yard Goat. Diameter measures 13" tall x 21" tall

DESCRIPTION: Large Howard steam locomotive bell. Brass bell with cast iron yoke and crank. Embossed with "Howard" to top and bottom of yoke. Howard produced bells for steam engines form 1840 onward. F

A very heavy steam locomotive bell with an 11 1/2" diameter and 9" height to the base casting. Overall with yoke it is 21" tall. Mounted on a rolling base. No casting marks or shop stamped numbers on