Evans 3 Carb Intake

Shows some minor wear and paint loss throughout. It was painted at some point. No noted cracks or repairs. Displays well. 7.5"x21.25"

Shows some wear, scratching, and nicks throughout. Was polished. No noted cracks or repairs. Displays well. 7.5"x21.25"

Very nice overall condition. Shows minor wear throughout. Two of the circulation holes below where the middle carb would go are blocked with pennies. No noted cracks or repairs. Displays well. 7.5"x22

Has Weiand wrote on it with marker. Marked DB213. Shows some wear throughout. Has a crack under one of the screw holes on the back end. No noted repairs. Displays well. 7 3/8"x21.25"

The stack is marked Harrell. The intake is unmarked. It shows light wear throughout. No noted cracks or repairs. It displays very well and is a unique intake. 7 3/8"x21 7/8"

Nice overall condition. Shows light wear and some nicks throughout. No noted cracks or repairs. Displays well. 7 3/8"x21.5"

Marked 047M on the bottom. Very nice overall condition. Shows light wear and some nicks. No noted cracks or repairs. Displays well. 7 3/8"x21.75"

Shows some wear throughout. Dirty but will clean up nice. Has a couple chips on the front. No noted cracks or repairs. 7 3/8"x22 1/8"

Has not been drilled. Has Battersby wrote on it in marker. Possible recast. Shows very little wear and is rough cast. No noted cracks or repairs. Displays well. 7 3/8"x21 3/8"

For model A & B. Shows some wear and scratching throughout. No noted cracks or repairs. Has Evans wrote on it in marker. Displays well. 5.5"x12 1/8"

In very good overall condition. Shows minor wear throughout. No noted cracks or repairs. Someone marked it 5405. It displays very well. 7.5"x21 7.8"

Marked PM-7. Shows some wear throughout with some nicks and chips. Has a very old repair which can be seen from the top and bottom. Displays well. 7.5"x21.75"

Was painted at one point. Marked F-7975. Shows wear and paint loss throughout. No noted cracks or repairs. Displays well and the carbs mount on an angle. 7.5"x21 7/8"

Custom Chevrolet six barrel carburetor racing intake. Untested

Shows some wear and paint loss throughout. Was painted at some point. No noted cracks or repairs. Displays well. 7.25"x21 5/8"

Shows minor wear throughout. Marked ER2. Dirty but will clean up nice. No noted cracks or repairs. Displays well. 7.5"x21.25"

Shows light wear throughout. Dirty but will clean up nice. No noted cracks or repairs. Displays well. 7.5"x21 1/8"

Shows some wear throughout. Dirty but will clean up nice. No noted cracks or repairs. Displays well. 7.5"x21.25"

Shows light wear throughout. The collar around one hole has a small chip and there is a screw in it. No noted cracks or repairs. Displays well. 7.5"x21"

Marked Edelbrock but the (roc) has been ground off. Shows some wear, nicks, and a few grind marks. It displays well. No noted cracks or repairs. 7.5"x21.75"

Shows some minor wear throughout. No noted cracks or repairs. Displays well. 7.25"x21 5/8"

WALKER EVANS. A lot of 3 books sold together. All generally fine condition, cloth or paper board with dust jacket. Including: * Rosenheim, Jeff L.; Eklund, Douglas. UNCLASSIFIED: A WALKER EVANS ANTHOL

Intake Manifold, Offenhauser half or 6 carb intake for 371-394 Oldsmobile, VG+ cond.

A Paul Evans/C.C. Design patinated copper patchwork hinged box with a cork liner. Stamped underneath "C.C. Design, Inc. designed by Paul Evans". 3-1/2 in tall x 6 in x 6 in.