Half Model of a Warboat No. 15

Yacht half model with a stained and varnish finish. Laminated with several planks. Mounted to a backboard. Weight is 8 pounds. 15" H x 42" L.

MOUNTED BUILDER'S HALF HULL MODELLate 19th/Early 20th CenturyProbably an ore ship. Hull painted white.Mahogany backboard 15" x 72.25".

Large old carved and painted wood half-hull model of the RED JACKET built by George Thomas of Rockland, Maine. 65.6 x 15 x 5 in deep.

19TH CENTURY TALL MODEL SHIP. IN WOODEN FRAME. MISSING ONE PIECE OF SAIL. 24" x 15"

A Half Hull Model of a Boat the back bearing a plaque inscribed Reemer & Co./ 1857. Height 15 x width 56 x depth 3 1/2 inches.

Half hull model of wooden schooner in natural wood finish mounted on wooden plaque with rope surrounding. Tag on the back names "Howard D Talley, Easton Md." Dimensions: 15.5" tall x 13.5" long Condit

Architectural Model of a Round Half Rotunda. Carved wood with columns and stairs in contrasting light and dark woods on a stepped base. Marked on bottom of model. Height: 15.5 in. Width: 18 in.

HALF HULL SHIP'S MODEL, "HAVANA TO NY, C.1926". FRAMED AND GLAZED 15 X 20"

Builders half-hull bark model, mounted and dated 1860. Reverse with ink inscription of ship's name, makers name, date and other writing. Overall size 15 x 64

1:50 scale,10 No. 245 Kaiser-Jeep trucks, 4 No. 241 half-track Hanomag and 1 No. 232 M10 destroyer.

(15) Royal Copenhagen Blue Fluted Half Lace coffee cups with saucers. Model number 1/756. The cup measures: 7.7 x 6.5 cm. Saucer diameter: 13.3 cm. Stamped. 1st factory quality. EF/B13/CB:A

by Peter Ward, of Hull, Yorkshire, England (1936- ), stamped verso and numbered 940, with tag from American Marine Model Gallery, Salem, Mass. The hull is 15 inches long, green paint, brass stack, pai

serial number "2867073" over "711", with a faux grain finish. First half 20th century. 17" H, 15 1/2" x 10" base.Provenance: From the Joe Jackson collection, Muncie, IN. Shipping Note: IN-HOUSE SHIPPI

1919 White Model 15, 3/4-Ton Stake Side Truck, engine number/sale number 125224:Purchased in 1964. Recovered from building demolition project in Newark, NJ. Complete factory-correct restoration and re

Featured here is one of the most unique shallow water diving helmets ever made! This is a Model 15 helmet made by Morse Diving Equipment in Boston, MA. This was the only shallow water helmet Morse off

Extremely rare shipyard builders half model of the United States Lighthouse Service Lighthouse Tender Juniper. Launched in 1939 just before the USLHS became The United States Coast Guard. The Juniper

EXTREMELY rare shipyard builders half model of the United States Lighthouse Service lighthouse tender JASMINE. Jasmine was built by the Dravo Contracting Company in Pittsburgh Pennsylvania in 1935. Th

Featured here is one of the most unique shallow water diving helmets ever made! This is a Model 15 helmet made by Morse Diving Equipment in Boston, MA. This was the only shallow water helmet Morse off

13 x 62 x 5 inches

48" H, has been restored to Texaco: Will Not Ship

Boat half model. This is an architects builders model for a sailing sloop. Quite nice with eight lifts. Mounted to a wood board. 9 lbs. 8"H x 6"W x 34"D.

Builders model of a Crosby Catboat. Laminated Pine half model. Nice shape, back is marked M. Crosby. The Crosby Family of Osterville Massachusetts are famous builders of catboats and other craft. 4x6x

Randall Made Model 15 Airman w/ Randall Sheath and Green Micarta Handle. Knife is in nice condition with minor wear from handling. Blade length of 5-1/2in and overall length of 10-1/4in.

Early 20th C. mounted in mirror-back shadowbox. Some wear and losses. 9"h x 29-1/2"w x 3"d Provenance: Property from a Private Princeton, NJ Collection