Large Mounted Antique Half Hull Wood Ship Model

M/V Miller Freeman Fisheries Research Vessel Hull 879 with Coast Guard letter and plaque. Good overall condition with some light edge wear. Includes bolts for mounting. Measures at 60" x 11 1/2" x 7"

Nautical half hull boat ship wall sculpture. Hand crafted solid wood. Mounted to a 9" x 29" clear panel. Half hull measures 25" x 4" x 2.5". Apparently unsigned. SHIPPINGHill Auction Gallery will not

Late 20th c. Info on back, 50” by 11” by 4 1/2”

A Mounted Wood Half Hull Ship Model Sea Witch 1846, 20th Century,Handmade cherry and mahogany, maker unknown.H: 7 1/4 L: 29 D: 3 1/4 in.

A Mounted Wood Half Hull Ship Model Columbia 1899, America's Cup Defender, 20th Century.Teak and mahogany wood handmade by Abordage Dominican Republic.H: 8 L: 29 1/2 D: 3 1/2 in.

lot of 2 antique boat maker's half hull ship models mounted on mahog plaques - 10"x22" & 6 1/2"x22"

Large Antique Wooden Half Hull Boat Model,4ft Long, Wall Hanging. This is a half hull boat wall hanging made out of wood. The bow and stern of the boat both have a distinctive point at the end, while

Large old carved wood half hull model NO. 221 CABLE SHIP. 5 ft. long (60 in.) by 10.5 in high.

Large old laminated wood half-hull model of a South Shore of MA boat initialed GFH. 33 in long x 7.5 x 5.5 in deep.

Large vintage carved and painted wood half-hull model of the CAMBRIAN built by Green and Lowden of London in 1854. 57 in long x 13.5 x 3.5 in deep.

Large vintage painted wood half-hull model LYNN OF LORN ARDMORE & CO. LIVERPOOL. 47 in long x 10 in high.

Wood half-hull model of three-masted ship, likely a clipper. Unidentified. Bowsprit end and stubby masts are built in. The boards are alternating dark brown and natural. The hull is mounted to a plywo

Vintage 12-Lift Ship Maker's Half Hull Boat Model, multi-wood construction mounted on beveled edge board 9.5 in. x 30 in.

Boat half model. This is an architects builders model for a sailing sloop. Quite nice with eight lifts. Mounted to a wood board. 9 lbs. 8"H x 6"W x 34"D.

Nineteenth century Clipper Ship Half Model with carved hull, three masts, carved figurehead, and capstan. Mounted to a wood backboard. Brass hanging tabs. Weight is 6 pounds.35" x 10" x 3"

Large ships half model of a sailing ship. Black hull mounted to a red board. Dimensions: 60 long by 10 tall

Large wooden model of a cargo ship with intricate details throughout & mounted on a wood base. Ex-Forbes Collection. 34"h x 17"w x 60"long

DESCRIPTION: A model cruise ship mounted in clear acrylic case with light wood base. Features a two toned blue hull with intricately built cabins. Further decorated with lifeboats, tennis courts, seat

Large presentation half-hull model, 20th/21st c., American, mounted on wood panel and raised on wood stand with tag reading in part "M/Y Aqualibrium 131' CRN Twin Screw Motor Yacht Handcrafted by Capt

Sweden Yachts "Gunga Din" relief half hull model on board of a yacht mounted to wood hanging maritime wall plaque, polychrome painted finish with ship's name, bearing gilt metal plaque: "Sweden Yachts

Two Mounted Half Hull Models 19th Century Height of larger backboard 7 5/8 x length 34 1/2 x overall depth 6 1/2 inches. Provenance: Ships Wheel Antiques, East Dennis, Massachusetts, 1960.

Two Mounted Half Hull Models 19th Century Height of larger backboard 11 x length 48 1/2 x overall depth 7 inches. This lot is located in Cincinnati. Provenance: Ships Wheel Antiques, East Dennis, Mass

DESCRIPTION: Two painted half hull ship models, each after a ship named "America": one painted green and white, mounted on a plaque, and marked on hull with name; one painted red and black and mounted

Large Mounted Half Hull Boat Model 61x19