Mark V Whip & Air Control Valve + Triple Manifold

This is a very nice collection of authentic equipment used on both the US Navy Mark V systems as well as commercial helmets. The lot consists of a vintage air control valve, no manufacturers name pres

Excellent grouping of WWII USN Mark V related diving equipment. The first piece is a Morse Diving Equipment Air Control valve. There is a small section of hose still attached as well as a brass swivel

Very nice vintage divers whip. This section of hose connected the Mark V helmet to the air control valve. This whip was made by Republic Rubber during August of 1966. Excellent example for display pur

Original Swan Rubber Company Divers H.P. or whip. This section of hose attached to the non-return valve on the Mark V and then to the air control valve. Hose is in excellent condition and dated Septem

Equipment looks like it was taken right off helmet after a job. Items include a vintage Mark V air control valve with no manufacturers name, a whip made by Republic Rubber in 1964 and lastly a 54 inch

Excellent condition Mark V divers whip. This air supply house connects to the air fitting on a Mark V helmet and also to the air control valve. This whip was made by Republic Rubber during October 197

Original used Republic Rubber Co whip. This 3-foot-long rubber hose with female connections went from the helmet to the air control valve. Good example for display purposes only. Dated 1958. All items

This is a vintage USN Mark V diving helmet air control valve. It is made of solid brass and was the first configuration used during the first half of the 20th century. In the 1916 US Navy diving manua

Nice example of a air control valve. This piece of equipment was used in conjunction with the US Navy Mark V diving helmet. The air control valve was attached to the whip, which attached to the air fi

This is a vintage USN Mark V diving helmet air control valve. It is made of solid brass and was the first configuration used during the first half of the 20th century. In the 1916 US Navy diving manua

Nice original air control valve made by Schrader. This is the type of valve used with the Mark V diving helmet. This piece does have the Schrader name stamped on it as well as a US Navy inspection sta

Wonderful grouping of original air and communications line equipment. The lot consists of a Lunkenheimer triple manifold, six brass air line hose clamps and a communications line block clamp. Difficul

This is a vintage USN Mark V diving helmet air control valve. NEW OLD STOCK in its original WWII box. The valve is clearly stamped A. Schrader’s Son. This valve is new old stock never used. Note the

Excellent new old stock air control valve made by Morse Diving Equipment in Boston. Valve is clearly stamped with company information. This valve is the type used in conjunction with the Mark V diving

Like new with original cardboard thread protectors is this Morse Diving Equipment air control valve. This piece of equipment was used with the US Navy Mark V diving helmet. It attached to the bastard

This is a very nice World War 2 Schrader air control valve and whip. The valve is stamped Schrader USA with a large US Navy inspection stamp below it. The whip is an original made by US Rubber dated A

This is a very nice original World War 2 air control valve and whip. The valve is stamped Schrader along with a US Navy inspection stamp. There is also the name Ruskinn stamped on both sides of the va

Vintage non-return valve made by the Morse Diving Equipment Company in Boston. Same style used on Mark V helmets as well as commercial hats. Nice original condition. All items will be shipped with a s

This vintage brass cap would be threaded on to the Mark V diving helmet air fitting or the end of the non-return valve. Excellent condition. All items will be shipped with a signature required upon de

Vital piece of safety equipment used on the US Navy Mark V diving helmet. This is an original Schrader USA non-return valve with a US Navy inspection stamp on it. This non-return valve would be the pe

Mercury Super Marauder Tri-Power System, aluminum intake manifold with three Holley 2300 two barrel carburetors, tri-power fuel pump cover, aluminum M valve covers and polished air cleaner housing des

42" IronForged™ Fabricated Deck, Smart Speed Control System, MyRide Suspension System, 24.5 hp Toro Commercial V-Twin 708cc w/Self-Cleaning Air Filter Housing, Model 75745. New Battery Installed 12/

ID Mark: C&WRR (Chesapeake & Western RR); SALRY (Seaboard Air Line RY); VGN (Virginian); CW (Chesapeake Western); V&SWRR (Virginia & Southwestern RR); VGNRR (Virginian RR); R&DRR (Richmond & Danville

Not only is this a legendary United States Navy Mark V diving helmet, it is a rarely found helium example, aka The Widow Maker! This variation of the standard Mark V helmet was designed for extreme de