PAIR OF ROBERT KOCH WELDED STEEL ROD SCULPTURES

BOTH SEA FAN SHAPED; (NEW YORK, 20TH/21ST C.); 30" TALL; SIGNED ON 6" X 6" SQUARE BASE; NUMBERED 530 AND 531

SIGNED BY ROBERT KOCH (NEW YORK, 20TH/21ST C.); NUMBERED UNDER BASE 507 AND 532; EACH 35" TALL ON 6" X 6" STEEL BASE PEDESTALS WITH BALL FEET

(NEW YORK, 20TH/21ST C.); 28" DIAMETER; ORIGINAL FINISH WITH SOME SURFACE RUST

46" DIAMETER; ONE IS MISSING ITS BASE, , THE OTHER IS MISSING TWO RODS AT THE BASE

(NEW YORK, 20TH/21ST C.); AND AN 11" X 11" X 32" TALL UNSIGNED WELDED STEEL PEDESTAL STAND; STEEL RODS AND REFLECTING SQUARES; 35" TALL

(NEW YORK, 20TH/21ST C.); 38" TALL; MISSING ONE BALL FOOT ON BASE

Organic sculpture, USA, ca. 2010 Welded steel. Signed. From a Pelham Manor, NY collection. - Dimensions: 29.5" h x 9" w.

Tony Rosenthal (American, 1914-2009). Untitled (from "Accumulation" series). Vertically oriented welded steel rod sculpture, unsigned, circa 1998. 92" H x 20" x 17" (233.7 x 50.8 x 43.2 cm.). From The

(NEW YORK, 20TH/21ST C.); 60" TALL, 20" DIAMETER CIRCLE

TONY ROSENTHAL Maquette for Echoes And Whispers (The Tall One). Welded steel rod lattice sculpture, circa 1997. 1346x1067x254 mm; 53x42x10 inches.Provenance: the artist's estate, New York; private col

Tony Rosenthal (American, 1914-2009). Maquette for "Echoes and Whispers (The Tall One)." Welded steel rod openwork lattice sculpture, unsigned, circa 1997. 53" H x 42" x 10" (134.6 x 106.7 x 25.4 cm.)

Stunning floor sculpture by California Native Rod Baer. The sculpture is tittled "Fictions" depicting a telescope sitting on top of books with a World hanging to a chain all sitting on top of a black

John Risley (1919-2002) chairs, pair Middletown, Connecticut, 1960s welded cold-roll steel rods, black finish unmarked larger: 17 3/4"w x 18"d x 46 1/2"h

A mid century modern Brutalist abstract steel sculpture constructed on welded steel rods and bent steel, unsigned. Ht: 14.375" Wd: 11.25" Dpth: 11"

PINE, Robert (American, b. 1951). Abstract Red Sharp-Angled Sculpture. [Ca. 20th century]. Painted and welded steel sculpture. Unsigned. Approximately 38 ½ h x 27 w x 30” d. Some wear (flak

THROUGH THE FIRE, 1995, welded steel sculpture, purportedly signed and dated 10/95 (not found), overall 50 x 27 x 29”.

Charles and Ray Eames Pair of LCM lounge chairs Herman Miller, design 1946, production circa late 1950s Bent plywood, welded steel rods 26 1/2" x 22" x 24" (each) One of the chairs is impressed "L

Vintage Diamond chairs, by KNOLL. White Rilsan finish, allows outdoor use. Glides are absent, no seat pads. Crafted from welded steel rods. Wear is consistent with age, use and exposure. Each measures

Goto, Joseph (American, Hawaii/Pittsburgh, 1916–1994), Untitled, circa 1955, welded steel rods and aluminum, 7 x 8.5 x 4.5 inches, Provenance: acquired from the artist; The Estate of James Wino

Pair Modernist Stacked Cube Garden Sculptures. Welded Steel. -- Dimensions: H: 61 inches: W: 16 inches: D: 16 inches ---

A pair of lounge chairs designed by Warren Platner for Knoll in 1966. Shaped frames constructed of welded steel rods with a nickel-plated finish. Purchased directly from Marshall Fields in Chicago in

Harry Bertoia, Italy (1915-1978)Pair of Knoll Bird Chairs and one ottoman by Harry Bertoia in yellow upholstery over frames of welded steel rods. Measures 39"H x 38"W; front of seat 16"H; Ottoman 25.5

attributed CHARLES GINNEVER (American b. 1931) A PAINTED STEEL AND ROD SCULPTURE ON STAND, PUTNEY, VERMONT, CIRCA 1978-1980, of triangular form in brown/red painted angled steel with welded rods, moun

Tony Rosenthal (American, 1914-2009). "Orpheus" variation. Welded Steel sculpture composed bent squared rods, unsigned, circa 1999. 52" H x 15" x 11" (132.1 x 38.1 x 27.9 cm.). Two additional "Orpheus