WEEDEN LIVE STEAM, STEAM ROLLER.

A nickel plated Weeden live steam, steam roller with brass roller, 8.5”H x 7”L.

German - 1920's - 8.5" L Need some tiny screws to secure the front end to the back end. Excellent Condition (See Description)

German - 1920's - 7.75" L Very Fine (missing the burner)

German Live Steam Traction Engine Steam Roller. Unmarked, possibly Bing. Brass Boiler and repaint to tractor.

235. MASSIVE GERMAN LIVE STEAM ROLLER | German steam roller, very detailed, circa 1930's/40's, all functions, clutch, brakes, steering, forward/reverse, weight - 25 lbs. From a private collection. | 2

REGNER steam engines, scale: 1:16, steamroller, Live Steam, in original box, with manual, completeness wasn't checked, probably as far as possible complete, as good as new, box is at the outside cause

2-Inch Live-Steam Model of the Steam Roller "Victoria", c. 1970 Model of the 8-ton 'C' class roller built by Aveling & Porter Ltd of Rochester, Kent, coal-fired, with reversible two-gear transmission,

1-Inch Live Steam Model of a Steamroller, c. 1990 Maxwell Hemmens, Engineers, Thorganby, York. Reversible, 2 gears, steerable front axle with chains, parking brake, manometer, feed pump, rope winch, d

3-Inch Live-Steam Model of a Wallis & Steevens Simplicity Roller, c. 1980 Coal-fired model of this unusual street roller by Wallis & Steevens of Basingstoke, England, with distinctive 5 1/3 in. diagon

Mamod Steam Traction Engine Tractor Steam Roller. 9 inches long, live steam engine.

1900. Reputed to be one of the 1st production toy automobiles. It is hand-painted tin with a live steam engine, 8 inches long. It has iron and wire wheels with its original burner . The stampings are

Enamel pressed steel, 18” long with live steam engine. It retains its burner and appears complete, showing light playwear. Would benefit from a cleaning. Nice example! From the Clint Miller Collecti

Circa 1910. Enamel-painted pressed steel, 18? long with live steam motor. It retains its burner and appears complete, showing light play wear. Would benefit from a cleaning. Nice example!From the Harl

Both vertical and with original stacks. The smaller one, a No. 2 brass model, has burner. The larger is a No. 67 model and has a side burner, nothing down below. Condition: (Very Good - Excellent). Di

Painted tin with live steam motor. Unusual 20” length with 2 stacks. It has been nicely restored, but a bit dirty from display and 1 rudder support is apart. From the Clint Miller Collection.

Painted tin with live steam motor, 16” long. It has its cork & appears complete, showing light to moderate playwear. From the Clint Miller Collection.

Germany, painted tin, Live steam powered, done in shades of green with red trim, overhead flywheel activates rear wheel by steering adjustment at front. 10 1/2" l.

218. WEEDEN LIVE STEAM LAUNCH | 17" l. | Rear platform overpainted, otherwise spirit paint in (Very Good Condition) | $150 - $300

1230. BING LIVE STEAM ROLLER | 7.75" l.

Painted tin with live steam motor, 16” long. It is missing its cork, otherwise appears complete, showing light to moderate playwear. From the Clint Miller Collection.

231. LARGE WEEDEN LIVE STEAM HUDSON LAUNCH | 17.5" l. | Stand is added, boat in All Original Condition. | $300 - $600

1890s. Hand-painted tin with intact live steam boiler and 3-stack burner. Weeden must have purchased these hulls from Radeguet, as they are identical, but added their own colors and top details. Yello

232. MEDIUM WEEDEN LIVE STEAM LAUNCH | 15" l. | All Original Condition. | $250 - $500

One is a Doll Company steam roller with DC Made in Germany decal on front. Second is a Weeden vehicle, embossed Weeden on endcap. Some oxidation to bare metal parts. Condition: (Very Good - Excellent)