Morrison Brass Steam Pressure Release Valves

Five (5). Canadian. 1930s. Also known as blow-off valves. Stamped, "James Morrison Brass Manufacturing Company Toronto", "Beaver". 6" to 11" (l). Minor surface oxidation and tool marks.

Twenty-five (25). American. 1910s-20s. Various markings include, "Detroit Lubricator Co. Detroit, USA", "Williams Ohio", "Penberthy", "Lube Devices Inc". 2 to 9.75" (l). Minor oxidation, tool marks.

Canadian. 1940s. Marked, "The Jas. Morrison Brass Mfg. Co. Ltd. Toronto" lower edge dial. 8 1/2" (diam.), 2 1/2" depth. CODE:TOOL

(2) Brass Crosby Steam Gauge & Valve Co pressure gauges, 7" long

Canadian. . Brass. Dial marked, "Test Guage". Marked, "The Jas. Morrison Brass Mfg. Co. Ltd. Toronto" lower edge dial. 8" (diam.), 2 1/2" depth. CODE:TOOL

Canadian. . Dial marked, "Adam Clark Limited". Marked, "The Jas. Morrison Brass Mfg. Co. Ltd. Toronto" lower edge dial. 5" (diam.), 2 1/4" depth. CODE:TOOL

Canadian. 1930s. Painted brass. One marked, "E. Leonard & Sons Ltd, London, Canada" and "Read Standard Corporation". Made by U.S Gauge Co., N.Y" and "James Morrison Brass Mfg Co., Toronto". An assortm

Steam locomotive pressure gauge. Canadian. Marked as "Loco. Gauge", 0-340 psi. should be good for an operating pressure of 175- 200 psi. All brass by Jas. Morrison Co., Toronto. "double spring" 2.25"

Lunkenheimer Dome Top Steam Whistle Brass having a 1.675-inch bell and 0.5-inch steam line, marked on valve; together with a Jas. P. Marsh brass pressure gauge marked on dial Property from: a Private

Crosby Vacuum Pressure Gauge. 8.5 in. silvered brass dial signed "Corliss Steam Engine Co., Providence, RI" and "Crosby Steam Gauge & Valve Co., Boston", has black incised gauge numbers and reads "Vac

A ten-inch American Bourdon brass and iron pressure gauge made by the American Steam Gauge & Valve Company, Boston, Mass. Good as found condition. Circa 1910. Diameter, 12". The Shaun & Joan Markey Co

Canadian. 1920s. Brass. Original and correct acorn finial. Stamped, "Jas Morrison Brass Co. Ltd., Toronto" upper bell. Horseless Carriage Museum, Fenelon Falls, Ont. 19"H x 4" bell diameter.

Featuring Lagonda and Liberty, 8"x6"

Original driver, replaced rear figure. Touch up at junction where wheels structure meets frame suggesting possible repair, replaced pressure release valve to rear of boiler, touch up at rivets otherwi

The Ashcroft Mrf Co: Heating Main, Steam at the Pumps, Fire System, Boiler Feed Line. Dimensions: D 3.5" x Dia: 12" Condition: Signs of age including tarnish, corrosion, and wear, one with a different

Brass safety valve made by Crane Co. Body is cast with Crane MS and stamped with 2590 on the inlet. The inlet is 2 3/4" diameter. Tool marks on the nut and some paint loss. Valve is 12 3/4" tall.

Large brass steam or pressure gauge. Has 4 mounting brackets and is in good condition. 300 ma pressure. Original patina.

Brass Steam Locomotive Boiler Pressure Gauge Nicely polished brass casing measuring 8 1/2" diameter on the rear. The edge of the gauge face has 839 stamped into it in serif font. Pressure readings on

Sold in untested condition. Some gauges missing lenses

22"x6 3/4" Whistle, Total Dimensions 60"x7", 2 1/4" OD

24"x8 1/2" Whistle, Total Dimensions 48"x8 1/2", 2 1/4" OD

3786 Embossed on handle, One Dent, 10 3/4"x3 1/2" Whistle, Total Dimensions 11"x5 1/2" with Handle, 3/4" ID

Dayton Ohio, Stamped 24, 13 3/4"x3 3/8" Whistle, Total Dimensions 14"x5 1/2" with Handle, 1 1/8" ID

Stamped 3/4, 1" OD, 11"x3 1/4" Whistle, Total Dimensions 13"x6" with Handle