KITTINGER GAINSBOROUGH PARQUETRY TOP CANDLE STAND

Kittinger tilt top candle stand, diamond shaped top, top is 19.75" by 19.75", height is 27.75" (top down)

Kittinger tip-top candlestand in mahogany. Williamsburg reproduction. Diameter 28" Height Oval table 26" x 18""

A Kittinger Williamsburg Reproduction CW135 mahogany tilt-top candle stand. 28in tall x 26in wide x 18in deep.

A pair of Kittinger 4CW Colonial Williamsburg Restoration tilt-top mahogany candle stands having dish tops, bird-cage supports, turned shafts, and cabriole legs. Each with branded marks. Each is 27 in

Parquetry inlaid document box, on later stand, losses to inlay, along with mahogany tilt top candle stand, mahogany floor lamp, spool turned mahogany nightstand, 16-1/2"h

By Kittinger Colonial Williamsburg, marked on underside, having octagonal top raised on pedestal base, approximate height 38 3/4", width of top 10 1/4".

KITTINGER MAHOGANY PAIR OF SMALL STAND TABLES, each circular top set with a candle slide, raised on tall tapered square legs. Branded and labeled Pattern No. 1239. Original surfaces with warm color. K

17th/early 18th century candle stand with a turned dish top, shaft and legs in old finish. Diameter 18"

28 1/2" X 19 1/2" X 14"

Screw top candle stand. Maple and oak. New England. Late 18th century. H 40-1/4" D 15-1/2". Condition: Old refinished surface with traces of paint. Link for high-res images: https://www.dropbox.com/sh

Fine federal tilt top candle stand with inlaid top, heart design and shaped knees. School of Nathan Lombard. Nice old surface.

An American tiger maple candle stand having dish top supported on turned post and tripod base. Size: 26" H x 17.5" W x 17" D

Late 18th-early 19th century, cherry. Turned top and column, tripod base with snake feet and sheet metal spider. Old refinishing. Age split and repair at bottom of column. Top has light wear and nicks

19th century, shaped top with adjustable standard on a ring turned base. 10.25 x 12.5 x 7 in. From The Collection of the Late Stuart Walston and Doris Schaum Walston of Wilson, North Carolina Addition

An 18th century Sheraton tilt-top candle stand with a shaped top and early surface decorated with paper cuttings to mimic Chinoiserie inlay popular at that time. Images include women in 18th century d

Candle stand is approx 16 1/2" in diameter and 27" tall. NO SHIPPING

Federal Mahogany Tilt Top Candle Standearly 19th century, solid rectangular top with notched corners, batten support, block with clasp, distinctive urn turned standard, arched spider leg tripod base.

Mahogany Federal spider leg tilt top candle stand, rect top with shaped corners, 20 1/4" x 16 1/2", 29" h

DESCRIPTION: Tilt top candle stand. Circular top on turned pedestal with trifed snake feet. Made in 1823 per note affixed under base. MEASUREMENTS: 18" diameter x 25" high. CONDITION: Staining to top.

Dainty, 19th century pink marble top candle stand seated on Rosewood tripod base. Measuring approx 21.5 x 14.5 oval marble top 30 tall. See photos.

United States,Circa 1810 Salmon painted figured maple candle stand with octagonal tilt top over finely turned column and three cabriole legs. 27 1/2" t x 21" w x 14" d.,Maple From the Barrington, Rhod

Circa 1810. Having a nicely shaped one board top above handsomely turned base emitting three legs ending in a spayed foot. H27 3/4" W17 3/4" D18 3/4" Sold from the collection of the late Mr. Charlie R

19th Century Federal Mahogany Tilt Top Candle Stand, octagonal shaped top, raised gallery edge, line inlay, teardrop and turned standard on tripod base. Height 27.5 in. Width 20.5 in. Depth 20 in.

Circa 1815. Having a quality one board top with nicely banded edge atop turned base emitting three legs leading to a pad foot. H29" W19 1/2" Sold from the collection of a Pawleys Island, South Carolin