1960s Model Wooden Hull Speedboat on Stand

A Group of Three Battery Operated Vintage Wooden Speed Boat Models on Stands, 20th Century,Two by R-C Craft Toledo, OH. Hull no. 1459 & 2137. Signed by the maker.Largest dimensions: H: 6 x W: 16 x D:

With American Flag. All wood. In display case. Overall measures 6 1/2" h x 15 1/4" w x 6 1/4" d. Ship measures 5 7/8" h x 12" w x 3 1/4" d.

Fully rigged, no sails, wooden hull, on oak stand (attached), 30" x 48" x 18".

Vintage painted wooden ship model on stand, three masted barque with black hull. On stand 35”H x 44”L x 7”D.

Carved wooden boat hull model in bench made tiger & birdseye maple stand - 24" long x 12" wide x 8" tall

Vintage Lacquer Wood Speed Boat Model Mounted on Wooden Stand. Unmarked. Overall measures 7-1/2" x 17-1/2" x 8". Condition: Needs cleaning, small surface wear otherwise good condition. Estimate: $100.

Wooden model of a classic four seat Chris Craft speedboat with nice detail to natural grain deck and hull with chrome and brass fittings, battery operated. 18" l.

Large Wooden Model of a Three-Mast Barque, with painted hull, detailed deck with anchors, rigging and lifeboat, with attached stand, 32 3/4" high, 45 1/2" x 5 1/4". Minor rigging breaks.

wooden boat with white painted hull, two props, dingy, two electric motors, tops lift off to reveal the hull, 12 x 51 x 14 in., height with stand 14 in.

POND MODEL20th CenturyHull painted gray. Displayed on a wooden stand.Height 36”. Length 33”.

Large Vintage French Naval Galleon Ship's Model in Display Case. Well detailed hull with three masts sails. Presented on a wooden stand. Approx. measures 33-1/2" x 40". Case measures 35-3/4" x 47" x 2

Large Vintage Galleon Ship's Model in Display Case. Well detailed hull with three masts sails. Presented on a wooden stand. Approx. measures 22" x 35". Case measures 25-1/4" x 37" x 15". Condition: Go

Large Vintage "Flying Ash" Galleon Ship's Model in Display Case. Well detailed hull with three masts sails. Presented on a wooden stand. Approx. measures 23" x 34-1/2". Case measures 27-1/2" x 39-3/4"

PRIMITIVE MODEL OF THE SCHOONER "FANNY FERN" OF QUINCY19th CenturyHull painted black, green and white. Flying an American flag. Displayed on a wooden stand.Total height 58". Length 51&q

SAILOR-MADE MODEL OF A TWO-MASTED SCHOONERLate 19th CenturyBlack hull with green bottom. Mounted on a paneled wooden box/stand.Height including stand 44". Length 42". Width approx. 9".

A vintage highly detailed metal model of The North American F-86 Sabre jet on a wooden stand. The base is decorated with an emblem of the 439 Combat Support Squadron with a sabre-toothed tigers head.

Gilt and enamel peacock model on wooden stand. [10" H x 10 1/2" W x 4 1/4" D]. In good condition.

Bronze cannon model on wooden stand. 19 1/2" L..

Backside of boat reads BASSETT LOWKE. Front of boat model is marked STREAMLINA. Model includes slate blue toned wooden stand. Piece measures approx 40 inches long 7 inches tall 8 inches wide. Model bo

Made for a boat builder in Lunenburg, Nova Scotia. It was built to scale and solidly constructed - six stage construction. Circa 1930. Provenance: From a boat collector near Chester, Nova Scotia. Acco

CARVED WOODEN HULL MODEL OF A 17TH CENTURY WAR SHIPLate 19th CenturyHull with gunports.Height approx. 14". Length approx. 37.5". Width approx. 9.5".

Chris Craft Triple Cockpit 20" Wooden Model Speedboat Feel as if you’re speeding across the water with the wind in your hair with this powerboat model of a classic mahogany hulled Chris Cr

20" Classic Chris Craft Triple Cockpit Wooden Model Speedboat Experience the allure of maritime history with the 20" Classic Chris Craft Triple Cockpit Wooden Model Speedboat—a meticulously

VINTAGE SCALE MODEL WOODEN SAILBOAT ON STAND | COLLECTIBLE BOATS BOATING NAUTICAL MARINE COASTAL HOME DECOR-35" X 36" X 5" APPROX W STAND-VERY GOOD OVERALL CONDITION-DP21722