64" Half Hull PADDLE STEAM SHIP Builder's Model

Vintage wood half hull model of a side paddle steam ship SF ROTHSAY BUILDER, MCKAY & BEGG, GREENOCK. 37.5 in long x 9 in high.

BUILDER'S HALF HULL MODEL OF THE SAIL/STEAM SHIP "LUZON"Circa 1864By Alexander Stephens & Son Shipbuilders, Linthouse, Govan, Scotland. Hull built up in ten lifts. Bottom finished bright and

Builders half-hull bark model, mounted and dated 1860. Reverse with ink inscription of ship's name, makers name, date and other writing. Overall size 15 x 64

Circa 1890 carved and painted wood half hull model (laminated) with original surface. Small piece of wood backboard missing on end. Overall 43 in long x 9 x 5 d. Possibly a Fall River Steam passenger

Half-Hull Ship Builder’s Model, New Bedford Whaler, 19th century. Length 49"

White nautical ship builder's half hull boat model. This large boat model is the perfect statement piece for anyone who loves boating or the craft of boat making. The piece can hang on the wall. The d

Vintage Ship Builder's Half Hull Model of a Catboat, circa 1920, Stacked wooden lift construction with painted hull and detailed deck. On original mahogany backboard with cutout on reverse to show hul

Vintage Ship Builder's Half Hull Model, "Lettie S. Reed", mounted on board, depicting a two masted ship with brass name plaque, "Lettie S. Reed, Built 1866 East Boothbay, 50 Ton, 66 Feet" 18 in. x 26

1921 Dockyard builders model of the "S.S.Belasco", built by Messers John I Thornycroft & Co Limited, Woolston Works, Southampton ' for Dover Shipping Company, hull. Length 300 Feet, Beam 43, Draught 2

Vintage Hand Painted Plank on Frame Half Hull Builders Model of the Iron Ship "Centaur", built in Portsmouth in 1865, carved and painted hull mounted on painted backboard. Length 44 in. Height 10 in.

BUILDER'S HALF HULL MODEL OF A STEAM-POWERED SAILING VESSELLast Half of the 19th CenturyBuilt up in nine lifts. Screw shaft molding at stern.Height 9.5". Length 50.5".Provenance:Hyde Park

A half hull ship model of the SS Oratios Cuppas, Builder Craig, Taylor & Co Ltd., with plaque inscribed 'S.S. Oratios Couppas, owner Nicholas Couppa Esq., Marseilles, Builders Craig Taylor & Co Ltd. S

BUILDER'S PLATING HALF HULL MODEL FOR THE SHIPS M.V. "EILDON" AND "RONAN"Circa 1938Built up in six lifts of old pine. Hull plating diagram drawn in India ink, with details of throu

BUILDER'S HALF HULL MODEL OF A COASTAL PACKET SHIP19th CenturyBuilt up in eight lifts. Stained a mahogany color. Height 9”. Length 57”. Depth 6.75”.

Modeled as a 19th Century paddleboat. Features word PADDLE prominently painted on upper left, the word FLEUR (French, "flower") to upper right, year 1876 to lower right. Drilled hole in center for eas

Contemporary Boat Maker's Half Hull Model, "Ship No. 18, length 175 ft, Tons 1,802, Geo. Maycock & Co Ship Builders, Leith 1853". Overall 42.5 in. x 9 in. Dimensions Overall 42.5 in. x 9 in.

A Nautical Half Hull Model 20th Century identified as the SS Cedartree / Built by John Crown & Sons Ltd - Sunderland / 1928 / For / The Tree Steamship Co Ltd / Howard - Jones Ltd Managers / Cardiff. h

MOUNTED BUILDER'S HALF HULL MODELLate 19th/Early 20th CenturyProbably an ore ship. Hull painted white.Mahogany backboard 15" x 72.25".

TWO MOUNTED BUILDER’S HALF HULL MODELS19th Century1) Sloop built up in nine lifts. Applied skeg and rudder. Backboard 7.75” x 25.5”.2) Ship built up in eight lifts. Inscribed on back

BUILDER’S HALF HULL MODEL OF A MOTOR VESSELEarly 20th CenturyBuilder’s markings on exterior of hull. Marked on top “Ships’ No’s. 471 + 472”.7” x 46”.

Painted half hull model of the yacht, "The Sheldrake". Lifts evident under paint. Designer: Winthrop L. Warner. Builder: Paul E. Luke. 1949. (Identified on engraved plaque). 12 x 36 3/4 inches (backbo

American, 20th C. Of impressive size. Marked with construction details. 16"h x 9' 10"l x 8"d

AMERICAN HALF-HULL SHIP MODEL, laminated pine mounted on a pine board with applied molding. Old refinished surface with warm color. Late 19th/early 20th century. 11 1/2" x 55 3/4".Provenance: Property

19th century schooner hull, mounted on back board. 12 1/4" high, 63 1/2" wide, 6" deep. Soiling, age and storage related wear, old crusty original finish. Property of a CT collector.