Sole , a pair of lithographed plywood side chairs by

PAIR OF BENT PLYWOOD MIDCENTURY STYLE SIDE CHAIRS 33 X 17.25 X 19

Pair MID CENTURY MODERN BENT PLYWOOD SIDE CHAIRS.Italian Design, black paint finish.both good conditionSize: 30 h , 19 arm span width

Eames for Herman Miller Molded Plywood Chairs Pair of side chairs having a molded seat in a laminated wood frame, retaining original label on underside Height: 29 inches, Width: 19 1/4 inches, Depth:

Pair of Charles Eames for Herman Miller molded plywood side chairs, labels on bottom of seats, 29 1/2" high x 19 1/2" x 20"

Designed in 1955. Attributed to Oswald Haerdtl for TON. Two plywood side chairs with orange floral seats. 17"w x 18.5"d x 32.5"h

Unmarked. Dimensions: H 28.5" x W 17.5" x D 20" x SH 16" Condition: One with replaced seat hardware underneath. Not identical pair. One without feet caps. Scuffs, scratches, and wear to wood.

Mid Century Modern Pair of Eames Plywood Potato Chip Chairs. Bent plywood low side chairs. 26"H. x 21 1/2"W. (some chipping)

Pair of genuine Mid-Century dining side chairs in molded plywood and bent wood with vinyl seats. Designed by George Mulhauser for Plycraft; one chair with original label under seat. Dimensions: H 32.5

Pair of Charles and Ray Eames for Herman Miller LCW side chairs, executed in molded plywood, having a molded seat in a laminated wood frame, 29"h

Molded plywood. Metal frames. 35"h x 19.75"w x 23"d. 16.5" seat height

Pair of side chairs, together with storage bench on casters, USA, later half 20th c. Brushed aluminum, birch plywood, wool upholstery Chairs marked Chairs: 34 1/2" x 16" x 20", bench: 23 1/2" x 44 1/2

A large pair of side chairs having brass legs in the manner of Robsjohn Gibbings. Ht: 31.5" Wd: 24.5" Dpth: 24.5"

A pair of mid century modern upholstered side chairs having square back and seats raised on brass legs in the manner of Robsjohn Gibbings. Ht: 30.5" Wd: 24.5" Dpth: 29" Seat: 16.75"

Edward Wormley for Dunbar, pair side chairs, c. 1955, USA, rosewood, leather, brass, rectangular leather seat and back raised on straight square legs with brass feet, brass handle on backrest, model 4

Josef Hoffmann, rare pair side chairs, c. 1905, Austria, beech bentwood, cream upholstery, shaped padded back with arched crest rail, wood and brass rivets on the reverse, over a De Fledermaus base su

Pair of newly upholstered side chairs from a 10 piece Italian Parlor set C.1770-80. Dark blue painted frames with gilt accents. Carved frame with floral carving at the center back of each. Reed legs.

Molded teak plywood with iron legs. 32 1/2"h. x 17 3/4"w. 20 1/2"d.

The Eames Molded Plywood dining chair metal base, known as DCM, is a classic example of the Eameses’ philosophy of using honest materials. The chair, designed in 1946, uses two pieces of molded

Set 8 THONET Molded Plywood Side Chairs. Stained in different colors. Branded Thonet Originals. -- Dimensions: H: 30 inches: W: 18 inches: D: 19 inches ---

Set of Six - 30.5 in H - 17 in W - 15.5 in D - Seat Height 18 in

The Eames Molded Plywood dining chair metal base, known as DCM, is a classic example of the Eameses’ philosophy of using honest materials. The chair, designed in 1946, uses two pieces of molded

The Eames Molded Plywood dining chair metal base, known as DCM, is a classic example of the Eameses’ philosophy of using honest materials. The chair, designed in 1946, uses two pieces of molded

Description - A pair of Norman Cherner for Plycraft side chairs. Dimensions - 31" x 17" x 21"

CHARLES EAMES FOR HERMAN MILLER PAIR PLYWOOD CHAIRS WITH CHROME LEGS. FROM LOCAL HUDSON VALLEY ESTATE. BOTH LABELS UNDERNEATH INTACT. IN ORIGINAL CONDITION. ONE IN BETTER SHAPE THAN OTHER, BOTH SOLID,