George Nelson for Herman Miller Teak Cocktail Tabl

Teak frame. Chrome legs and hardware. 41"h. x 56"w. x 18 1/2"d.

GEORGE NELSON HERMAN MILLER Coffee Cocktail Table with pull out serving trays. Reversible. -- Dimensions: H: 29 inches: W: 26 inches: D: 24 inches ---

Herman Miller label underneath. Walnut. Single drawer on each short side. Dimensions: H 18" x W 36" x D 24" Condition: Some small veneer chips to edges and corners. Surface scratches and scuffs. Some

George Nelson for Herman Miller Teak Coffee Table. Warm teak toned hardwood coffee table with tapered legs. Size: 54in x 32in x 15in Condition: Evidence of use and wear, will require mild attention to

George Nelson & Associates dining set Herman MillerUSA, 1959teak, lacquered wood, vinyl, cane60 w × 36 d × 29 h in (152 × 91 × 74 cm) Sold with two 20-inch leaves; t

Wall unit designed by George Nelson for Herman Miller. Includes 3 uprights, 5 teak sides with sliders and magnets, 1 small blank slide, 2 smaller shelves -32" w x 12" d; 6 larger shelves - 31" w x 18.

teak, aluminum, white enameled metal; manufacturer's applied round metal tag "Designed by George Nelson / Herman Miller Zeeland, Mich." 67 1/4 inches wide; 18 1/2 inches deep; 33 1/4 inches high

Wall unit designed by George Nelson for Herman Miller. Unmarked. Full assembly not shown in primary pictures. Includes 1 can lamp, 2 glass sliding doors, a teak sliding door, 4 uprights - 89.25" h x 1

GEORGE NELSON for HERMAN MILLER Bench. Long Slat Bench Table. Coffee cocktail table. -- Dimensions: H: 14 inches: W: 92.5 inches: D: 18.5 inches ---

GEORGE NELSON for HERMAN MILLER Bench. Long Slat Bench Table. Coffee cocktail table. -- Dimensions: H: 14 inches: W: 92.5 inches: D: 18.5 inches ---

Nelson, George, Custom Thin Edge Jewelry Chest (model #5212) Herman Miller 1955 teak, rosewood, lacquered wood, porcelain, 10.5 x 33.5 x 13 inches,

George Nelson & Associates (American, 1908-1986) Thin Edge Cabinet Herman Miller, USA teak, aluminum applied manufacturer's foil label to drawer H 33 1/4 x W 67 1/4 x D 18 1/2 inches Property from the

George Nelson & Associates (American, 1908-1986) Thin Edge Cabinet Herman Miller, USA teak, aluminum applied manufacturer's disk label to drawer H 33 3/4 x W 66 3/4 x D 18 1/2 inches Property from the

George Nelson & Associates (American, 1908-1986) Pair of Thin Edge Nightstands Herman Miller, USA teak, aluminum applied manufacturer's foil label to interior of drawer H 23 1/2 x W 18 x D 18 1/2 inch

A George Nelson for Herman Miller 'CSS' Wall and Shelving Unit. Comprising four L-shaped tension rods, seventeen teak shelves, and assorted hardware (partial) Shelves: .75" x 30" x 12" Pole height: 90

George Nelson & Associates (1908-1986) CSS (Comprehensive Storage System) Herman Miller, USA teak, enameled aluminum, aluminum H 95 x W 97 x D 19 3/4 inches This lot is located in Chicago. System is c

George Nelson for Herman Miller Miniature Cabinet, c. 2005, Herman Miller tag, model 5217, designed 1952, enameled steel and teak, h.44 in., w. 10 1/4 in., d. 13 in. Provenance: Estate of Eric Bloomqu

Teak or walnut extension table with two leaves. Furniture maker medallion badge underside of top. (JAMC634)(JP) Dimensions: 72" x 40 closed without leaves. Leaves 20 x 40 each Property from a Northwes

Teak with grey painted doors, fitted interior shelving and drawers raised on aluminum feet; metal Herman Miller label on interior h. 25-1/2 w. 70 d. 18-1/2 in.

George Nelson & Associates American, 20th Century Dining Table with Two Leaves,Herman Miller, USA teak Closed H 29 1/4 x W 72 x D 40 inches. Property from the Collection of Alan Beckhard, St. Louis, M

George Nelson for Herman Miller coffee table, the chrome frame with a white enamel top above teak apron. 15” H x 48” W x 27” D

George Nelson for Herman Miller, Thin Edge group model 5207, rosewood nightstand on aluminum legs, with two shelves over one drawer, unmarked. The piece has been altered to accommodate a door; the pul

A walnut cabinet, model 4701. With black painted rectangular legs and four drawers with original hardware. Together with a teak lamp. Dimensions: 18" x 24", 30" tall. The lamp is 6" x 6" and 30" tall.

George Nelson & Associates Thin Edge cabinet, model 5723 Herman MillerUSA, 1952teak, matte chrome-plated steel, porcelain67 w × 19.5 d × 32 h in (170 × 50 × 81 cm) C