6 Different Diving Helmet & Air Hose Fitting Wrenches

This lot consists of a US Navy Mark V diving helmet T wrench and air fitting cap. The wrench is used for the removal and installation of the 12 wing nuts on the outside of the breastplate. This exampl

This is a length of vintage Mark V divers rubber air line hose. This line was made in 1979 and appears to be in good condition, but is being sold for display purposes only. The brass fittings are in g

This vintage brass cap would be threaded on to the Mark V diving helmet air fitting or the end of the non-return valve. Excellent condition. All items will be shipped with a signature required upon de

This is an excellent example of a Snead Company shallow water diving helmet. The helmet is made of cast iron with an acrylic window. A small brass threaded air fitting is located behind the handle on

Excellent condition Mark V divers whip. This air supply house connects to the air fitting on a Mark V helmet and also to the air control valve. This whip was made by Republic Rubber during October 197

This is a Thompson Engineering Company (TECO) shallow water diving helmet. This helmet or rubber mask utilizes twin air hoses that hook to a TECO union. Masks like this were used for shallow water div

An assortment of 14 various brass divers air hose fittings. Two of the double male fittings are stamped Morse Diving Equipment and a third is stamped DESCO. All items will be shipped with a signature

Draeger adjustable air valve with factory hose and leather belt for the DM200 and DM220 diving helmet systems. This would attached to the helmet for surface supplied air. Appears to be in excellent co

Like new appearing Draeger surface supplied air line with fittings on both ends for the DM200 and DM220 diving helmet systems. Line appears to be 40 meters in length. Original Draeger factory informat

Original used Republic Rubber Co whip. This 3-foot-long rubber hose with female connections went from the helmet to the air control valve. Good example for display purposes only. Dated 1958. All items

When conjuring the image of what a classic English diving helmet looks like the 6 bolt Admiralty Pattern helmet made by Siebe Gorman comes to mind. Siebe Gorman started making the first diving helmets

When conjuring the image of what a classic English diving helmet looks like the 6 bolt Admiralty Pattern helmet made by Siebe Gorman comes to mind. Siebe Gorman started making the first diving helmets

During World War 2 their were four different makers of the famed US Navy Mark V diving helmet. Of those four, by far the most difficult to find are examples made by the Miller Dunn Company in Miami, F

One of the most influential and important designers and manufacturer of diving helmets starting in 1967 is Ben Miller. After designing his own helmet out of fiberglass and making 6 of them, he went to

Starting in 1968 DESCO (Diving Equipment and Supply Company) debuted the now iconic and still in use Air Hat. These helmets are also known as Free Flow or Pot Hats. Constructed of spun copper with a l

Starting in 1968 DESCO (Diving Equipment and Supply Company) debuted the now iconic and still in use Air Hat. These helmets are also known as Free Flow or Pot Hats. Constructed of spun copper with a l

Very unique, rare and historic diving helmet made by the famed company Kirby Morgan. Known as the KMCSH-6 Clamshell helmet, this model was designed for use by the US Navy in the Sea Lab project in 196

Reproduction of an early 20th Century diver's bolted hard hat helmet. Good overall condition with normal storage wear. Measures approximately 7 1/2 in. 6 1/2 in. x 6 1/2 in. MMB in house USA continent

Original Swan Rubber Company Divers H.P. or whip. This section of hose attached to the non-return valve on the Mark V and then to the air control valve. Hose is in excellent condition and dated Septem

Equipment looks like it was taken right off helmet after a job. Items include a vintage Mark V air control valve with no manufacturers name, a whip made by Republic Rubber in 1964 and lastly a 54 inch

Correct driver with a replaced helmet. (JY) Condition: (Good - Very Good). Dimensions: 14 - 1/2” x 3 - 1/2” x 6 - 3/4”.

Presented for your consideration is what we believe to be an extremely early mid 1800s Canadian John Date diving helmet. John Date was established in 1853 in Montreal Canada. Mr. Date was a master cop

Not only is this a legendary United States Navy Mark V diving helmet, it is a rarely found helium example, aka The Widow Maker! This variation of the standard Mark V helmet was designed for extreme de

Arguably the most desirable and collected diving helmet in the world, the United States Navy Mark V. This example was made in August 1943 by the A. Schraders Son Company, Division Of Scovill Mfg. Co.