Hans J. Wegner, Sewing table, model AT 33

Hans J. Wegner Sewing table, model AT 33 Andreas TuckDenmark, c. 1956teak, cane 24 h × 26.25 w × 22.5 d in (61 × 67 × 57 cm) Sold with two 10.5-inch leaves; table

Hans Wegner (1914-2007) for Andreas Tuck sewing table, model AT33 Denmark, circa 1960 teak, cane, brass branded mark to underside 'Andr. Tuck Design Hans J. Wegner Made in Denmark' closed: 26 1/2"w x

Hans J. Wegner (Danish, 1914-2007) Sewing Stand, Model AT 33. Andreas Tuck Denmark, c. 1960 stained teak, stained oak, cane. Table features two 10-inch drop-leaves; table measures forty-seven inches w

DESCRIPTION: Hans J Wegner, Andreas Tuck, (Sewing Table AT-33) features a teak wood and oak table with rectangular top and drop-leaf sides over a single drawer atop a pull-out inset basket. Marked at

Teak drop-leaf sewing table with fitted drawer and caned pull-out basket by Hans Wegner for Andreas Tuck, Denmark, 1950s. Underside branded with maker and designer information. Fully extended: 46 in.

Hans J. Wegner Coffee table, model GE 453 GetamaDenmark, c. 1965stainless steel, oak, Formica, wenge 13 h x 25.5 dia in (33 x 65 cm) Provenance: Wyeth, New York | Privat

Sewing table. Model AT33. Andreas Tuck Denmark. 1960. Stained teak, stained oak, and cane 26 1/2w x 23d x 23 1/3h.

Hans J. Wegner Drop-leaf dining table, model AT 304 Andreas TuckDenmark, c. 1960teak, brass 28.25 h x 50.5 w x 33.625 d in (72 x 128 x 85 cm) Branded manufacturer's mark to underside 'Fa

Hans J. Wegner Dining Table, model AT 314, Andreas Tuck, Denmark, 1960. Teak, brass. Closed - 72w x 41. 75d x 28h, Open - 119w x 41 3/4d x 28h. Provenance: George and Elizabeth Wile collection.

Hans J. Wegner Coffee table, model AT 308 Andreas TuckDenmark, c. 1955teak, oak, brass 21.5 h × 39.25 w × 23.5 d in (55 × 100 × 60 cm) Branded manufacturer's mark

Hans J. Wegner coffee table, model AT12 Andreas TuckDenmark, 1950 / 1955teak, matte chrome-plated steel29.5 w × 29.5 d × 15 h in (75 × 75 × 38 cm) Signed with partia

Hans J. Wegner Dining table, model no. AT-303, ca. 1960 Teak, beech, brass. Produced by Andreas Tuck, Denmark. Underside with producer's brand. 28.5" H x 63" W x 32" D

Hans J. Wegner (1914-2007) Dining Table, model AT321 Andreas Tuck, Denmark rosewood, chrome-plated steel with manufacturer's branded mark H 28 1/2 x W 63 x D 51 1/4 inches, closed Property from the Ph

Hans J. Wegner Dining chairs model CH 33, set of four Carl Hansen & SonDenmark, 1958teak, leather 28.75 h × 21.75 w × 19 d in (73 × 55 × 48 cm) Branded manufactur

Height 24 inches, top closed 24.5 x 22.5 inches. With early brand to base.

Teak drop-leaf sewing table with fitted drawer and caned pull-out basket by Hans Wegner for Andreas Tuck, Denmark, 1950s. Underside branded with maker and designer information. Fully extended: 46 in.

Hans Wegner for Andreas Tuck double drop-leaf desk with three drawers. Marked 'Fabrikat Andr. Tuck / Arkitekt Hans J Wegner Denmark. Along with two tier table, model AT 305, unmarked. Measures 53 1/2"

Hans J. Wegner Andreas Tuck Set of 3 nesting tables, model AT 40. Designed in the 1950s. Teak wood. Dimensions of the largest table: 48 x 52 x 34 cm. Marked with 'Andreas Tuck' brand mark.

A Hans Wegner AT-33 teak sewing table for Andreas Tuck. 23.5 x 26.5 x 23.5. Measurements are in inches. (Height x Width x Depth)

20th century, stamped mark "Ander. Tuck Design, Hans J. Wegner, Made in Denmark", teak table with two drop leaves, over a single drawer with fitted interior for sewing implements, above pull out slide

HANS J WEGNER Danish Modern Teak Sewing Stand Drop Sides. Side table with wicker basket drawer. Branded Fabrikat Andr Tuck Arkitekt Hans J Wegner Denmark Made in Denmark.-- Dimensions: H: 24 inches: W

Designed by Hans J. Wegner and made in Denmark by Andreas Tuck Furniture Makers. Table features two 19.5 inch leaves. Table measures 94 inches when fully extended. Model AT312 Andreas Tuck Denmark, C.

Hans J. Wegner Lounge chair, model AP 27 A.P. StolenDenmark, 1954upholstery, walnut 42 h × 33 w × 30 d in (107 × 84 × 76 cm) Literature: Hans

Hans Wegner Folding tray table, model no. AT-35, ca. 1960 Teak, oak. Manufactured by Andreas Tuck, Denmark. Underside impressed with manufacturer and designer information. 19" H x 24" W x 24" D