A Painted Metal Tangye Horizontal Steam Engine Model

A Painted Metal Tangye Horizontal Steam Engine Model Early 20th Century Length 18 1/2 inches. Property from the Estate of Peter F. Stone, Buchanan, Michigan

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS NO. 9 HORIZONTAL MILL/STEAM PLANT MODEL STEAM ENGINE WITH DYNAMO AND PUMP,cast-iron, steel, and brass, green painted base fitted with four tabs for

A Painted Metal Mill Steam Engine Model 19th Century with later paint, mounted to a wood base.  Width 18 inches.  Property from the Estate of Peter F. Stone, Buchanan, Michigan

A Painted Metal Stuart No. 4 Steam Engine Model 20th Century raised on a wood base. Height of engine 10 inches.  Property from the Estate of Peter F. Stone, Buchanan, Michigan

A 20th century live Steam Model of a Pennsylvania locomotive , c. 1920s. Painted metal steam engine and tender on a section of track. Minor losses to the paint. 41 1/2" long, 47 3/4" x 14 1/2" high ov

An American Painted Metal Steam Engine Governor Gardner Governor Co., Quincy, IL, Second Half 19th Century model no. 3, raised on a wooden base. Height 36 inches. Property from the Estate of Peter F.

Metal and wood construction, very detailed, shows signs of light wear and age, not marked, displays exceptionally well and has an eye-catching industrial look, 11x14x6", rated 8.75-9

Vintage Steam Engine, with double wheels and red stack, with burner, unmarked, set on a rectangular beveled edge wooden base, 11 1/2" high, 10 1/4" x 4 3/4". As is, one wheel loose and metal stem deta

A MODEL UNDERTYPE STATIONARY HORIZONTAL STEAM ENGINE, ENGLISH, DATED 1894, with metal plaque engraved F. LAWRANCE 1894,the single cylinder with eccentric driven slide valve, the valve chest with maker

2 Steam Engine Working Models, c. 1970 Brass, cast metal and steel. 1) Horizontal single-cylinder steam engine, partially finished in brown, 1 3/4-inch mahogany-lagged brass-bound double-action cylind

2 Steam Engine Working Models, c. 1970 Brass, cast metal and steel. 1) Horizontal single-cylinder steam engine, partially finished in green, 1 3/4-inch lagged brass-bound mahogany double-action cylind

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY VERTICAL MODEL STEAM ENGINE, cast-iron, steel, and brass, green painted base fitted with four tabs for securing base, vertical form of a

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS TWIN-CYLINDER MARINE LAUNCH MODEL STEAM ENGINE, cast-iron, steel, and brass, green painted base fitted with four tabs for securing base, mounted on

Model consisting of: German steam engine in bronze and sheet metal, engine with one piston and added dynamo, manufactured by Wüttemberg. In painted sheet metal. 33 x 31 cm x 26 cm.

American. 1890s. Solid brass, painted. Mounted to fitted walnut base. An exceptionally high quality live steam model featuring twin cylinders and a reverse-action switch. 7 1/2 x 14 x 10 1/4". Base ha

4 Model Steam Engines Brass, steel and cast metal. 1) Vertical twin-cylinder compound steam engine, high- and low-pressure cylinders, Ø 3 and 2 1/3 in., height 11 in. - 2) Horizontal steam engine,

A TRAIN MODEL OF THE THE DEWITT CLINTON STEAM ENGINE LOCOMOTIVE, AMERICAN, MID 20TH CENTURY, paint, wood, fabric, and tole painted metal on a track affixed to a naturalistic rocky base, raised on an o

Model of a Live Steam Horizontal Mill Engine, c. 1900 Steel, brass and cast metal, 3-inch cylinder, crosshead guide in lateral bearings, sliding valve control with eccentric ring, crankshaft with 3 oi

A mechanical scale model of the wood-burning DeWitt Clinton steam engine locomotive, tender and three passenger coaches, comprised primarily of painted wood and various metals. The DeWitt Clinton was

Steam powered, mounted on wooded gallery, metal and wood both show signs of age, engine has reverse gear, appears to function as it should, displays very well and has nice industrial look, likely from

7 Steam Vehicles and a Steam Locomotive 1) 5 English Wills Finecast steam models, c. 1980, scale 1:32, painted white-metal, 4 in display case. - Allchin traction engine "Royal Chester", red, 1925, len

Live-Steam Model of a Single-Cylinder Horizontal Mill Engine, c. 1920 Steel, brass and cast metal, 2 1/2-inch double-action cylinder, crosshead guide in plane bearings, spoked 10-inch flywheel, on hea

This is an antique 19th century horizontal steam engine model from the Weeden Manufacturing Company of New Bedford, Massachusetts. Includes display case, extra parts, and price list and directions for

Steam engine motel is antique. Piece is metal, possibly handmade steam engine model measures approx 10.5 inches long 6 inches tall 3.75 inches wide. Antique steam engine model, steam engine model, tra