A Mounted Half Hull Ship Model Columbia 1899

A Mounted Wood Half Hull Ship Model Columbia 1899, America's Cup Defender, 20th Century.Teak and mahogany wood handmade by Abordage Dominican Republic.H: 8 L: 29 1/2 D: 3 1/2 in.

Wooden half hull ship model of Columbia, 1901, USA. Plaque measures 28" x 9".

A Mounted Wood Half Hull Ship Model Sea Witch 1846, 20th Century,Handmade cherry and mahogany, maker unknown.H: 7 1/4 L: 29 D: 3 1/4 in.

DESCRIPTION: Two painted half hull ship models, each after a ship named "America": one painted green and white, mounted on a plaque, and marked on hull with name; one painted red and black and mounted

M/V Miller Freeman Fisheries Research Vessel Hull 879 with Coast Guard letter and plaque. Good overall condition with some light edge wear. Includes bolts for mounting. Measures at 60" x 11 1/2" x 7"

Columbia 1901 US half hull model measuring approx. 9" x 27"

lot of 2 antique boat maker's half hull ship models mounted on mahog plaques - 10"x22" & 6 1/2"x22"

AMERICAN HALF-HULL SHIP MODEL, laminated pine mounted on a pine board with applied molding. Old refinished surface with warm color. Late 19th/early 20th century. 11 1/2" x 55 3/4".Provenance: Property

19th century schooner hull, mounted on back board. 12 1/4" high, 63 1/2" wide, 6" deep. Soiling, age and storage related wear, old crusty original finish. Property of a CT collector.

AMERICAN HALF-HULL SHIP MODEL, laminated pine mounted on a walnut board. First half 20th century. 19" x 36".Very good condition with minor wear and scratches.

Hand Painted Half Hull Ship Model. Marked: "Cook." As Mounted Approximately 21.0L x 5.5H x 4.5D in.

mounted on boards, one hull signed "Idalette". Larger: 24 1/2" long, 5 1/4" high. Light wear, soiling. Estate of Joseph ''Jay'' St. Mark PhD, Newtown CT historian, appraiser, and collector of fine Ame

Hand Painted Wooden Half Hull Ship Model. Back Marked: "Bambino." As Mounted Approximately 21.0L x 5.5H x 4.625D in.

Hand Painted Half Hull Wooden Ship Model. As Mounted Approximately 33.5L x 8.25H x 5.0D in.

MOUNTED HALF HULL MODEL OF THE CLIPPER SHIP "FLYING CLOUD"20th CenturyModel with black painted hull, a red bottom, and a carved figurehead and trailboard. Vessel identification painted on ba

Contemporary Half Hull Model of, "Ship Argonaut", mounted on board, built in 1876" Overall 37 in. x 10 in. Dimensions Overall 37 in. x 10 in.

A Carved Wooden Half Hull Model Ship. Half Hulls are exact models of ships hulls, without the mast and rigging, that were used by shipwrights to plan the design of the ship and make sure everything wa

MOUNTED HALF HULL MODEL OF THE CALIFORNIA CLIPPER SHIP “TWILIGHT”19th CenturyPine model. Backboard with notched corners.Backboard 10” x 28”. Provenance:Purchased from a descend

(3) Half Hull Models of America's Cup Winners, incl: America - 1851, in two-tone laminated mahogany, mounted on a two tone wooden back panel with molded edge, brass plaque reads 'America - 1851- USA,

Vintage Ship Builder's Half Hull Model, "Lettie S. Reed", mounted on board, depicting a two masted ship with brass name plaque, "Lettie S. Reed, Built 1866 East Boothbay, 50 Ton, 66 Feet" 18 in. x 26

ENGLISH MOUNTED HALF HULL MODEL Mid-20th Century Marked on backboard "Harwich Ship Building Co." and "Ship No. 18 Length 196 ft. Tons 2,215". Backboard 9.25" x 41.75".

Vintage 12-Lift Ship Maker's Half Hull Boat Model, multi-wood construction mounted on beveled edge board 9.5 in. x 30 in.

Two Mounted Half Hull Models 19th Century Height of larger backboard 7 5/8 x length 34 1/2 x overall depth 6 1/2 inches. Provenance: Ships Wheel Antiques, East Dennis, Massachusetts, 1960.

TWO MOUNTED HALF HULL MODELS20th CenturyPlaques on backboards indicate Glasgow ships.Backboard lengths 50” and 54”.