APOLLO 11 "KAPTON" FOIL

A large section of Kapton foil Approximately 8" x 8" removed from the LM-5's decent stage just days before launch while staged inside the Saturn V rocket at Launch pad 39-A. This repair was to replace

~ 3/16 x 3/16" square piece of Kapton Foil Apollo 11 CM gold foil tinged. Apollo 11 logo on top. Fox River Bond Cotton watermark. Buzz Aldrin signed letter.

Two substantial sections of Kapton Foil flown to the moon on the Apollo 11 mission. These fragments are encased in a plastic container and have a combined overall measurement of about 2" x 1 1/2". Inc

An authentic section of Kapton Foil from the Lunar Module Eagle. This 8" x 8" section of foil is from the personal collection of Lee Brandt who personally removed this Kapton Foil from the Lunar Modul

There are three sections of Kapton Foil removed from the Apollo 11 Command Module after the mission. This protective foil covered the entire Command Module and flew to Lunar Orbit as part of the space

Apollo 11 Piece of Flown Kapton Foil w/ NASA Provenance A small piece of flown Kapton foil from the Apollo 11 Command Module Columbia, measuring approximately one-eight of an inch in length and housed

Three Displays of Flown Kapton Foil from Apollo 11, 13, & 16 Missions Three displays of space-flown pieces of Kapton Mylar foil from the Apollo 11, 13, and 16 missions. The foil provided thermal p

Contemporary 70mm NASA color positive transparency film depicting Neil Armstrong on the surface of the moon from the Apollo 11 mission. With a fragment of Kapton foil insulation from the mission. Incl

Sections of Kapton Foil Flown to the Moon and removed from the Apollo 11 Command Module after recovery. These Kapton Foil fragments are affixed to an informative COA from long time space enthusiast, K

Three Displays of Flown Kapton Polyimide Foil from Apollo 11,13, and 16 A group of three of displays of space-flown pieces of Kapton Mylar foil from the Apollo 11, Apollo 13, and Apollo 16 missions. T

Apollo 13, 11 avril - 17 avril 1970 #Flown #Nasa #COA Provenance : One of the most important European collections Fragment du bouclier thermique (Kapton Foil) et segment d'un câble electrique utili

Group of two Kapton insulation fragments from the Apollo 11 Command Module "Columbia." One side showing the gold foil that was affixed to the CM; the other side showing the blue-tinted silve

Original 11 pieces of Kapton Foil flown on Apollo 8

NASA FLOWN APOLLO II "KAPTON" POLYMIDE FOIL. PROVIDED THERMAL PROTECTION FOR COMMAND MODULE COLUMBIA 11" X 8 3/4" All items Located in Hollywood Florida Warehouse. Thank you for your inquiry about shi

Group of two Kapton insulation fragments from the Apollo 11 Command Module #107 "Columbia." These fragments were flown to the moon and back to Earth in July 1969 and removed after splashdown

Apollo 13 Kapton Foil, Buzz Aldrin Signed Book and Shuttle Flown Items. Includes the following (1) Apollo 13, two flown kapton foil peices attached to an LOA by Sandy Clarkson from The Right Stuff Inc

Apollo 13 Kapton Foil flown to the Moon and back and removed from 'Odyessy'. This is a substantial piece of Kapton Foil measuring 1 3/4" x 7/8" with a second smaller section both sealed in a 2" round

This beautiful Lucite display contains Kapton Foil from the Lunar Module 'Spider' and was produced by the Astronaut Scholarship Foundation. It is number 163 of 200 and contains a section of Kapton Foi

Apollo 13 Flown Kapton Foil. Ex. American Space Museum Kapton Foil, .675" x 1", was flown to space and removed from the Apollo 13 Command Module after the recovery. Encapsulated by CAG to a size of 2.

Apollo 13 Flown Kapton Foil Fragments. There are two sections of Kapton Heat Shield Insulation that was part of the Apollo 13 Command Module "Odyssey" and was flown around the Moon on the Apollo 13 mi

A fairly large piece of Kapton Foil from the Apollo 10 Command Module named "Charlie Brown". This Kapton Foil sample is stored in a plastic pocket that is mounted to the COA that is from Robert Miner

A very large section of Kapton Foil from the Lunar Module #12 (LM-12) removed on the Launch Pad just days before the launch. This section measures about 5" x 6" and comes with an informative COA from

Apollo 13 Flown Kapton Foil. Ex. American Space Museum Kapton Foil, .675" x 1", was flown to space and removed from the Apollo 13 Command Module after the recovery. Encapsulated by CAG to a size of 2.

An authentic section of Kapton Foil for the Lunar Module #6 better known as "Intrepid". This section measures about 6" x 6" and comes from Lunar Module Engineer, Marty Winkle. He retained the section