10’ H.S. Gillum Salmon Fly Rod

Beautiful condition 10', three piece, two tip salmon rod from Gillum of Manchester, VT, most likely made during his time as rod building instructor at Orvis. Rod appears to be in unfished ex condition

3/2, original, very good condition. Cork with light ridging, butt ferrule wrap is a slightly lighter colored replacement, the reel seat is made for a detachable handle (not included). With the origina

3/2 rod made by “Pinky” Gillum, serial 1-780, professionally refinished with ghosting marks where the original stripping guide was located (about 1 1/2” above the present location).

RARE HS Gillum (Harold Steele) custom built (3) piece bamboo fly fishing rod measuring 11'9" and weighing exactly 1 lb. The two tips appear to be nice and straight however one is missing a guide. This

Salmon 430-2 Imperial XL 3pc graphite fly rod, 14', line weight 9/10, with sock. Excellent.

Butt and one tip are each 1" short, while the mid and second tip are full length. Wrapped maroon with black tipping, the rod is original missing the stripping guide, otherwise all guides are intact "P

2/1, 9-10wt., in excellent condition (soiled grip). With the original bag and labeled tube.

Original with alligatoring to the varnish. Butt cap is marked "The/H.L. Leonard/Rod/H.L. Leonard Rod Co/ Makers" with the additional "Reg US Pat Off" beneath the shield. The pocket for the reel foot b

Unmarked Bamboo Salmon Fly Rod With 2 Tips 9'. // Provenance: PRIVATE ESTATE CENTRAL FLORIDA. Please carefully read our terms of sale, shipping information, and request any condition reports or photos

Hardy The Phantom #5 6'10" Fly Rod

Fishing: an early 20thC Allcock's split bamboo 10' fly rod, with three greenheart sections, in an S. Allcock & Co. Ltd rod bag

Tips and mid measure 47 inches, and a 25" butt section consisting of a 6" permanent fighting butt, 4" screw lock all metal reel seat, 8 inch cork grip, and 7" section of ferruled cane above the grip c

Orvis two piece graphite fly fishing rod 9 1/2' long weighing 6 1/8 oz. for Orvis WF11F with sheath and hard case. Orvis three piece graphite salmon fly fishing rod 13 1/2' long weighing 9 1/4 oz. for

10 unused salmon flies by the lauded Scottish fly tyer Mark Firth, professionally mounted and framed. Each large fly identified with a handwritten pattern and "Salmon Flies Tied to Traditional Pattern

Hardy "Mooching 10'305cm" Salmon Rod & Slip.

A Bernard Ramanauskas fly rod built for Scott, rated for #5 lines, this 2/2 rod has truncated Swiss style ferrules, a straight-tapered cork grip (lightly soiled), agate stripper, translucent yellow wr

Edwards #65 Quad Bamboo Fly Rod, 10' 3/2A classic taper by one of America`s trailblazers, hardwood spacer with down locking reel seat, ideal with a #8 or #9 line. Tube Length 42 in. Included Detachabl

Strudwick DBT #10, 9', 3pt. fly rod. Estate of Michael Coe, PhD, New Haven, CT.

G. Loomis GLX Fly Rod, #10, 9' FR1090-4. Estate of Michael Coe, PhD, New Haven, CT.

Built in the 1/2/3 format circa 1880s, this lancewood rod is complete in all respects. Plated brass slide band reel seat with rattan wrapped silk spiraled with red silk. Above the nickel silver windin

Homage to the early makers by noted antique rod collector Jeffrey Hatton, and built for his friend a fellow collector Tom Kerr. Light colored cane is wrapped red with black tipping elaborate red and b

Orvis Power Matrix 10, four part fly rod #10, 9', 5 1/2oz. #4. Estate of Michael Coe, PhD, New Haven, CT.

Attributed to Harry and Tom Pritchard, this 3/1 rod is unmarked with the exception of patent dates on the layered wood and hard rubber reel seat ("PAT. DEC 13th 1881") and nickel silver sliding band (

Vintage Heddon split bamboo #10 8 1/2' fly fishing rod with bag and tube and Montague Holloglass cork rod with original bag. Heddon is in very good condition. Montague had 1 eyelet replaced.