(2) Cast Aluminum Indy Motor Speedway Racer

Cast aluminum in original blue & bronze painted finish with No. 6 on hood, cast Indanapolis Motor Speedway on each side with black runner tires, 3 5/8 x 8 1/2 x 2" high. Condition paint circa 90%.

Nice lot includes 8 1/2" Indianapolis Motor Speedway cast aluminum race car, a boxed windup Schuco Micro racer, a Porsche Club of American enameled badge, and a 1964 Corvette Trophy. The cast aluminum

(2) Cast aluminum Indy style racers. Both are in good condition with light wear from age and play. Each measures approximately 9 1/2" long.

Toy race car, Indy Speedway racer, sold only at the Speedway, cast aluminum w/rubber wheels, Exc cond, 12"L.

(2) Maisto Die Cast 1:18 scale Indy Racing Car Replicas including #10 Indianapolis 500 Motor Speedway car signed with the #77. The signature has not been identified. We also have the #91 Delta faucet

Wilber Shaw Indy Racer Souvenir, 8 1/2 in long, 2 Thimble Drome Racers, 8 1/2 in long, 1 has motor, windup working, other has motor removed, Irwin Racer, 6 1/2 in long, Renwal Maserati, 9 in long, fri

7-1/2 x 20 x 8-1/4 inches (19.1 x 50.8 x 21.0 cm) Well presented 1:6 scale model Offenhauser engine Speedway racer. Provenance: Retro 2005. Museum acquisition Offy series. Includes a Plexi Display Cas

Aluminum Indianapolis Motor Speedway Car and Master Caster Aluminum Lat with wear. Largest measures 9" Very Good-Excellent

Vintage rare cast aluminum Toldeo Racer, car measures 11 1/4 inches long, 2 3/4 inches wide and 3 inches tall at the windshield, the body is in excellent condition with no cracks or nicks, the wheels

Lot of 15 Racing Crew & Knit Shirts, Most Sealed in Plastic Bags The lot includes the following: Knit Shirts: 2-1997 Indy 200 at Walt Disney World Sz Lg, 2-Visionaire 500 Charlotte Motor Speedway Sz L

2 die cast, 5 in long, 1 blue is windup working, red one is not working, white metal racer, 4 in long, aluminum racer is 4 1/4 in long, cast racer is 4 1/4 in long, C4-5.

7-1/2 x 20 x 8-1/4 inches (19.1 x 50.8 x 21.0 cm) Well presented 1:6 scale model Offenhauser engine Speedway racer. Provenance: Retro 2005. Museum acquisition Offy series. Includes a Plexi Display Cas

Indy Racer, aluminum, 12 in long, no markings, Classic Collectibles T-36 Bugatti, resin, 15 in long, missing 1 exhaust pipe, #44 of 500, C8.

includes cast aluminum Hubley Kiddie racer, and cast iron racer with articulated pistons, nickel wheels. Possibly repainted with replaced driver.

O ga, die cast, aluminum, power car w/motor, 2 coaches, obsv, cars are lighted, paper diaphragms, orig instruction sheet, C8.

7-1/2 x 20 x 8-1/4 inches (19.1 x 50.8 x 21.0 cm) Well presented 1:6 scale model Offenhauser engine Speedway racer. Provenance: Retro 2005. Museum acquisition Offy series. Includes a Plexi Display Cas

Custom Reuhl Indy 500 Tether Gas Powered Race Car. Nice looking Racer with cast aluminum body. NO drive train. Nice paint and graphics. 17" Excellent

This lot contains Action Racing Collectables 1:24 Scale Ford Taurus Stock Car from 1999 Inaugural Race Cracker Barrel 500 at Atlanta Motor Speedway. It is approx 8-1/2" x 3" x 2-1/4" and i

painted cast iron & aluminum, 9 1/2 in long, tires worn, clicker missing sheet metal part, orig issue, C6.

medals and plaquettes: 2 - 1936 World Power Conference, Raoul Wallenberg by Marika Somogyi #77/100, Packard Motor Car Co, Paine, Webber & Co, 1935 Normandic Transatlantic, 1932 Champlain Transatlantic

2 airplanes- camo minia airplane pedal car "Xonex" Ltd. Ed. 845/10,000, "War Hawk" 1995, 12" long; & die cast airplane, Commemorative Coca-Cola 600 Race at Charlotte Motor Speedway 1993, 10.75" wingsp

Outstanding scratch built Bugatti Type 35B Gas Powered Racer. All aluminum body with cast aluminum base. Car is very detailed and well made. Well powered with large gas powered motor. Car has Duro-Mat

Hubley cast iron red devil racer, with aluminum cockpit, visible engine with hood lifted, and painted cast iron driver, with unusual Hustler Toy Corp. marked rubber tires, 9 1/2'' l. Provenance: Bill

(1) Cast aluminum form with raised and etched numbers. Old crack to one side. 6" H x 11" L x 3.75" W approx. (2) Wood "SPEEDWAY" form marked 9 1/2 A. 3.5" H x 11.5" L x 3.5" W approx. Wood "VULCAN" fo