Crosby Three Chime Steam Whistle

Crosby Three Chime Steam Whistle Crosby Three Chime Steam Whistle. Bowl of the whistle is stamped with Crosby Steam Gage & Valve Co. Boston USA. Measures 3 1/2" diameter and 13" tall. Whistle has one

Buckeye Brass 3" Diameter / 12" Tall Three Chime Steam Whistle Three chime Buckeye Brass Works three chime steam whistle. The whistle is stamped Buckeye Brass Works Dayton O at the top edge. Whistle m

This is a Lunkenheimer three inch, three chime steam whistle. Dome top, with a patent date of June 7, 1892 on the base. Nice original piece, complete with lever.

Three Chime Brass Steam Whistle. Measures 18 1/2" from end to end. 1 1/2" inlet. The diameter of the bell is 5 1/2". There are no stampings, casting numbers, etc. on this whistle. It is completely unm

Powell Three Chime Baldy Steam Whistle Powell 3" diameter three chime baldy steam whistle with a 1" inlet. Whistle is 10 7/8" tall and is in good condition. Powell is stamped on the valve body. The le

3" Lunkenheimer Three Chime Baldy Steam Whistle Lunkenheimer 3" diameter three chime baldy steam whistle with a 1" inlet. The whistle is in good condition, restored red paint, no valve. The whistle is

Brass, three-chime railroad steam whistle, about 15 inches tall and 1-3/4 inches in diameter. Has three orifices, each with its own resonating chamber above it. Windways are unobstructed. Brass surfac

Three Chime Brass Steam Locomotive Whistle Whistle measures 11 1/4" tall with a 4" diameter bell. The inlet size is 1 3/4". The bell has an 1 1/2" shallow dent near the top and other minor areas of pi

Gee Cee Three Chime Brass Step Top Steam Whistle Whistle measure 8" tall with an 1 1/4" inlet. Side of the hex on the valve stamped with Gee Cee Co. PT Huron M. Valve moves freely and no notable damag

Brass Steam Locomotive Three Chime Whistle Flat top long brass bell with underside pull lever, marked with the 'G' and '2' on the bottom edge, reportedly from the Illinois Central Railroad 2-10-2 engi

A Lunkenheimer bronze three-chime whistle. The bell measures 6" in diameter and 23" tall to the top of the acorn finial. There is no valve hardware. It is mounted on a 5 - 1/2" pipe flange for display

A bronze three-chime whistle with integral valve and actuation lever. Whistle measures 2" in diameter. Has an acorn finial and is mounted on a nice wood stand. Plumbed with a quick-disconnect on the s

A nice three chamber brass whistle. It has a large 6" diameter, 12 1/2" tube, 20" total height including top to feed pipe entry. It is big and heavy. It has a long "Crosby Steam Gauge Valve Company B0

A nice three chamber brass whistle. It has a 5" diameter, 10" tube, 16" total height including top to feed pipe entry. It is big and heavy. It has a long "Crosby Steam Gauge Valve Company Boston Mass

A very nice Crosby Steam Gauge Company product from Boston. It has that information and a Jan 30, 1877 patent on the base area. It's a 3 chime. It has a 2 1/4" diameter and it stands 6" tall. It has a

Crosby Steam Gauge & Valve Company Boston US Patent Jan 30, 1877 marking in a single line in small lettering along the base. 27.5" X 8" diameter.

This is brass Crosby steam whistle in nice used condition. Overall height of 15 inches, with whistle body measuring 8 inches.

By Buckeye Brass Works - Dayton, Ohio. Approximately 14" long

**For an in-house shipping quote, please reach out to us at rockauctiongallery@gmail.com** Railroad steam whistle by an unknown manufacturer. This item is likely brass, but has been tarnished over tim

14 1/2" Tall Single Chime Steam Whistle Whistle valve has a 1" diameter inlet and the body is stamped with 44 1/2". Lever moves freely and returns to original position. The bell is clean with no notab

Powell 2 1/2" Diameter Three Chime Whistle w/ 1" Inlet Powell 2 1/2" Diameter Three Chime Whistle w/ 1" Inlet. Overall height is approximately 10" Bell has moderate denting, the valve body has scaring

12" Single Chime Steam Whistle Bell measures 10 1/2" tall and has an 1 1/4" inlet. The bell has two moderate grinding marks which have opened up pinhole leaks in one side of the bell. No manufacturing

A 39" tall, 8" diameter bronze single-chime steam whistle from an Atlantic coastal freighter. Bronze bowl has been cleaned and lacquered. Fits 2" NPT. Shroud is painted black. This is not a standard s

4-chime steam whistle, 19"H