LOCKHEED X-24C CONTRACTOR'S CONCEPT MODEL. Mixed material on wood base, Southwick Models, c. 197...

LOCKHEED X-24C CONTRACTOR'S CONCEPT MODEL. Mixed material on wood base, Southwick Models, c. 1977, wingspan 7 1/2 inches, fuselage 15 inches, 9 1/2 inches tall, plaque on base reads: 'Lockheed NASA Fl

MARTIN MARIETTA X-24B CONTRACTOR'S MODEL. Mixed material on wood base, Southwick Models, c.1973, wingspan 5 3/4 inches, fuselage 10 3/4 inches, 6 inches tall, the base bearing three plaques: 'Flight M

BOEING X-48C BWB CONTRACTOR'S CONCEPT MODEL. Mixed material on wood base, PacMin, c.2010, wingspan 17 7/8 inches, fuselage 9 inches, 7 1/2 inches tall, wood base is blank, with original box. Boeing's

LOCKHEED MARTIN SKUNK WORKS X-55A ACCA CONTRACTOR'S MODEL. Mixed material on wood base, c.2008, wingspan 15 1/2 inches, fuselage 15 1/2 inches, 9 1/4 inches tall, plaque on base reads: 'X-55 Advanced

BOEING X-20 DYNA-SOAR SPACEPLANE CONTRACTOR'S CONCEPT PROPOSAL MODEL. Mixed material on wood base, c.2000, wingspan 6 inches, fuselage 8 1/2 inches, 11 inches tall, plaque on base reads: 'United State

MARTIN MARIETTA X-24A CONTRACTOR'S MODEL. Mixed materials on metal base, Southwick Models, c. 1968, wingspan 4 1/4-inches, fuselage 7 3/4-inches, 9 1/4-inches tall, base is blank. The Martin Marietta

MCDONNELL DOUGLAS NASP X-30 CONTRACTOR'S CONCEPT MODEL. Mixed materials on wood base, mid-1980s, wingspan 4-inches, fuselage 10-inches, 3 3/4-inches tall, plaque on base reads: 'McDonnell Douglas,' un

LOCKHEED MARTIN SKUNK WORKS X-33 CONTRACTOR'S CONCEPT MODEL. Mixed material on composite base, RetroRocket, mid-1990s, wingspan 9 1/2 inches, fuselage 8 1/4 inches, 9 3/4 inches tall, no plaque on bas

NORTHROP GRUMMAN X-47A PEGASUS CONTRACTOR'S MODEL. Mixed materials on wood base, c.2001, wingspan 11 3/4-inches, fuselage 12-inches, 9-inches tall, pentagon-shaped base with plaque reading: 'Pegasus /

BOEING X-50 DRAGONFLY CONTRACTOR'S MODEL. Mixed materials on wood base, Dimensional Technologies, wingspan 10-inches, fuselage 13-inches, 7 1/2-inches tall,c.2002, plaque on base reads: 'Phantom Works

PRATT & WHITNEY/ROCKWELL X-30 NATIONAL AEROSPACE PLANE CONCEPT CONTRATOR'S MODEL. Mixed materials on wood base, Penwal, late 1980s, wingspan 4-inches, fuselage 15 3/8-inches, 6 1/2-inches tall, plaque

ROCKWELL X-30 NASP CONCEPT CONTRACTOR'S MODEL. Mixed materials on plastic base, Penwal, 1980s, 4-inch wingspan, 13 3/4-inch fuselage, 5 1/2-inches high, base is blank. The Rockwell X-30 was an advance

MCDONNELL XV-1 CONVERTIPLANE CONTRACTOR'S MODEL. Mixed material on wood base, [Wesco Models], late 1960s, wingspan 10 inches, fuselage 11 inches, 9 inches tall, plaque on base reads: 'McDonell XV-1 Co

NORTH AMERICAN AVIATION X-15A-2 Model. Mixed material on wood base, RetroRocket, no date, wingspan 6 3/4 inches, fuselage 15 1/4 inches, 10 3/4 inches tall, plaque on base reads: 'X-15A-2 / North Amer

NORTHROP X-21A CONTRACTOR'S MODEL. Very large injection-molded plastic model on wood base, c.1963, wingspan 21 3/4 inches, fuselage 17 1/2 inches, 11 inches tall, plaque on base reads: 'Laminar Flow C

SCALED COMPOSITES WHITE KNIGHT SS1 MODEL SIGNED BY ASTRONAUT BRIAN BINNIE. Mixed materials on wood base, Daron Executive Series, c.2005, wingspan 16 7/8 inches, fuselage 8 1/4 inches, 9 inches tall, '

TUPOLEV TU-22 BLINDER CONTRACTOR'S MODEL. Mixed materials on plastic base, 1970s, 9-inch wingspan, 14 1/4-inch fuselage, 4-inches high, blank base. The Tupolev Tu-22 was the Soviet Union's first super

Articulated horse artist's model by C. Barbe, c. 1830, England, carved wood, brass interior hardware, on iron and wood display, base stamped "C. Barbe 60 Regent's Quadrant, London", 14"h x 20"l x 6"w

Automobilia, Concept Car Design Model, hand-carved wood block w/turquoise finish by unknown car maker, c.1955, for rear engine car, chromed bumpers & body trim, typed card w/design notes underneath, V

A pair of wing back lounge chairs with walnut bases and arm accents by Adrian Pearsall for Craft Associates, Model 2231-C 40 x 34 x 36. All measurements are in inches.

Satoru Abe (Japanese/American. b. 1926) "Moon in the Trees," 1988, mixed metal weldment on wood base, signed. Size: 16'' x 23'' x 11'' (41 x 58 x 28 cm); Height on Stand: 18" (46 cm).

Asian figural sculpture of noblewoman with attendant holding a fan, c.19th century, glazed terra cotta, handle of fan is wood, includes wood base and stand, sculpture measures 46.5 x 19.5 x 10 inches,

National Cash Register, Model 452, c.1912, ornate cast brass w/nickel finish & monetary keys up to $9, on orig oak base w/full set of keys, VG working cond w/normal wear, 22.75"H x 25"W x 16.5"D.

Pierre Chapo (French, 1927-1987) Special-Order Dining Table, model T14C c. 1980, Meubles Chapo, France ash wood, steel unmarked H 29 x W 72 x D 33 1/2 inches