MAHOGANY 3 PART GATE LEG BANQUET TABLE

molded edge and D-shaped ends, center section with rectangular top, each section tilts, on turned standards with sabre legs ending in brass paw feet with casters, 28.5"h; 46"deep; 3-parts wi

Bench Made Federal Style Inlaid Mahogany Banquet Tablemid 20th century, three part form, consisting of two D-ends (30 x 48 x 33.5 in.); a drop leaf table with gate-leg supports (30 x 48 x 28.5 in., ea

attributed to shop of James Woodard, Norfolk, 1820-1830, each section with solid mahogany top and single drop leaf, ring, baluster, and spiral turned legs on casters, yellow pine secondary, 28-3/4 x 4

British or American, 18th century elements, highly figured solid mahogany tops, central drop leaf section with two D ends, on molded square legs, fitted felt table pads, 29-1/2 x 51-3/4 x 63-1/2 in.,

American Federal Mahogany Gate-leg Banquet Table. 29"h. x 47-1/2"w. x 21"d. Condition: Very good with minor wear, old refinish.

Hepplewhite Style Mahogany 3-Part Banquet Table. Drop leaf 30"h. x 44"w. x 26"l., each half-moon table 30"h. x 44"w. x 24"l. 120"l. altogether. Condition: Very good.

Large Kittinger Chippendale mahogany three-part banquet table, 30"h x 119"l x 48"d

Mahogany 3-part drop leaf banquet table, pinned and nailed construction, drop leaf center section 29-1/2"h x 52"w x 22-1/2"d, 22"w drop leaves, second sections 52"w x 19"d, splits in top on one end se

Queen Anne style 3-part mahogany banquet table. 30.5"h x 48"d x 115"l (fully extended).

(1) shell back urn-splat side chair with pad foot, turned stretcher, blue sateen fabric upholstery, signed Winterthur G. Crawford, appears to be mahogany wood; H-3 1/4"; (1) gate-leg side table, turne

Mahogany Gateleg Table. 27 3/4" W 10 1/2" D 27 3/4" H

Impressive 3 part banded burl mahogany dining room/banquet table with (2) 22" leaves, has veneer loss on sides, top has minimal wear, book match grain approx. 121" w x 48" d x 30" h Opens to 165" w

Late 18th - early 19th century Mahogany gate leg 2-part dining table with banded inlay pencil legs and single board drops. This quality 2 part dining table is in excellent condition and is House ready

3 part straight leg Chippendale mahogany dining table. 107" long x 48" wide x 29" tall.

A solid mahogany Duncan Phyfe period 3 part mahogany dining table with splayed legs with carved knees and brass paw feet. Each section has brass U shaped clips to connect. Each section is 34 in long (

2-part Mahogany New York Sheraton Dropleaf Banquet Table, on turned legs with square center sections, 48"l x 25-1/2"w x 16-1/2" leaves, overall 84"l when assembled, mid 19th c

New England Federal Mahogany Banquet Tableearly 19th century, two D-end forms, each with drop leaf and single gate-leg support, the demilune top above a veneered skirt, each table with five ring turne

Diminutive Mahogany Inlay Gate Leg Table. 28 1/4" W 9 3/4" D 27 3/4" H

Overall 97-1/2" wide X 44-1/4" deep X 30" high. Has repair to one leg on center drop leaf table. Has some light scratches. MG.

Circa 1840 New England Gate Leg Table with deep, square cornered leaves, simple skirt, bowed and ring turned legs ending in pear feet, 29 1/2" x 42" x 20 1/2" with 21 3/4" leaves. Fine condition.

Federal Style Mahogany Three-Part Banquet Table. 30"h. x 41-3/4" x 87-1/2"l. overall. Condition: Good with wear and old repairs.

20th century; no label; with shaped top and bowed frieze drawer; closed: 36 inches wide; 17 inches deep (34 inches open); 29 3/4 inches high

early 20th century with hinged serpentine top Condition: general marks, nicks, scratches and wear. Wobbles slightly. A small area of bubbling to finish. 36 inches wide; 16 3/4 inches deep (33 1/2 inch

Dropside gateleg table in mahogany with drawers. Mid 20th century. 30"h x 34 1/4"w x 12 3/4"d, 42"w with leaves open