Large Painted Mahogany, Oak, and Pine Ship Model

American, 19th C. 6' 4"h x 4'w x 14"d

Large Painted Wooden Ship Model,Folk Art,4.5ft long. This piece has some assembly required, so it would be a great piece for someone who loves to create things or do crafts. It would be a great projec

Probably English, 19th C. 29-1/2"l x 7"h x 5-1/4"d. Property from the Collection of Phillips Hathaway, Ragamont House, Salisbury, CT.

French oak cased model ship, 20th c., case with glazed sides, housing model ship with two masts, fabric sails, tricolor flag, mounted cannons, case: approx 33"h, 36.5"w, 16.75"d Start Price: $150.00

Fine Ship Model of the Mayflower by Fabio Wood, 2005, by Fabio Wood (Louisiana, b. 1949), carved and painted cypress, mahogany, nylon, and course canvas, self base, h. 46 in., w. 53 in., d. 10 in.

Large handcrafted painted wooden model depicting the American sidewheel packet ship Adam Jacobs, together with an assortment of accessories, on rectangular base, apparently unmarked. Note: The Adam Ja

Early 1900's mahogany-cased ship model of a steam yacht, 30 in long. Painted wood with plaster ocean. Case is 35 x 21.5 x 12 inches.

Modern polyhedron sculpture and base pedestal. Composed of nesting geometric shapes, in varying carved woods of mahogany, oak, and maple. Presented with a large white painted wooden base pedestal. Pol

George III Mahogany Secretary / Butler's Deskearly 19th century, three part form, mahogany veneer, oak and pine secondary, molded cornice above a vertically veneered frieze, two large hinged upper cab

Large and Well-Built R.M.S. Lusitania Ship Model with Mahogany and Glass Case 75 x 24 x 9 inches (190.5 x 61.0 x 22.9 cm) (model) 80-1/2 x 30-1/4 x 14 inches (204.5 x 76.8 x 35.6 cm) (case) The RMS Lu

Finely detailed very large hand made and painted wood model, possibly after the USS Constitution, the three-masted warship has 21 iron cannons, five lifeboats are present. Not quite complete; appears

Mahogany. Half hull. Painted. Backboard also mahogany. 6 3/8 x 23 3/4

Naive Four-Mast Ship with white hull, probably sailor-made, circa 1890-1900, not identified, fully rigged but with no sails, mounted on a blue painted plinth, set on an oak base with unframed glass co

Italian Coffee table c. 1950oak, mahogany, glass, reverse-painted glass 20 h × 38.5 w × 21.75 d in (51 × 98 × 55 cm) This work will ship from Rago in Lambe

MOUNTED BUILDER'S HALF HULL MODELLate 19th/Early 20th CenturyProbably an ore ship. Hull painted white.Mahogany backboard 15" x 72.25".

20th century. The hull carved from a solid pine laminated board. The hull painted green above the water line with natural finish below. The rudder applied to the hull. The green backboard with the nam

Paw foot. Gilt trim. Old paper label remnants to back. Early 19th century. Matching mahogany on pine and oak. Retaining its original painted and parcel gilt paw feet, moldings, catches and lock. Insid

Large Japanese Taisho imari porcelain plate, interior painted with scene of treasure-ship, pine tree, and birds. 16 inch D, 2 inch H.

Large vintage carved and painted wood half-hull model of the CAMBRIAN built by Green and Lowden of London in 1854. 57 in long x 13.5 x 3.5 in deep.

Nicely Detailed Model of a Clipper Ship, 20th c., probably American, mounted on a pine board painted to simulate waves, H.- 20 1/4 in., W.- 32 1/2 in., D.- 11 3/4 in.

Model ship appears to be handcrafted & hand painted. Piece has multiple sailor/ soldier figures on ship structure. Ship is large scale. Sides of model have canon structures. One side of display case h

Fully detailed unidentified US Sailing Ship, a freighter, with planked hull, proper framing, deck details, cloth sails and string rigging, green and black hull, mounted on a molded mahogany base, 69"

Handmade wood clipper ship model of the "Witch of the Wave" mounted to mahogany base. appears in very good condition. Wikipedia: https://en.wikipedia.org/wiki/Witch_of_the_Wave#:~ :text=Witch%20of%20t

Large Wooden Model of a Three-Mast Barque, with painted hull, detailed deck with anchors, rigging and lifeboat, with attached stand, 32 3/4" high, 45 1/2" x 5 1/4". Minor rigging breaks.