An antique ship builders half hull of steamer

White nautical ship builder's half hull boat model. This large boat model is the perfect statement piece for anyone who loves boating or the craft of boat making. The piece can hang on the wall. The d

Boat half model. This is an architects builders model for a sailing sloop. Quite nice with eight lifts. Mounted to a wood board. 9 lbs. 8"H x 6"W x 34"D.

Late 19th c. Pine Half Hull, not mounted on plaque, unidentified maker and ship, roughly 6" x 42" x 5". Refinished.

Vintage Ship Builder's Half Hull Model of a Catboat, circa 1920, Stacked wooden lift construction with painted hull and detailed deck. On original mahogany backboard with cutout on reverse to show hul

MOUNTED ON A 29" X 3" PINE BOARD

Vintage Ship Builder's Half Hull Model, "Lettie S. Reed", mounted on board, depicting a two masted ship with brass name plaque, "Lettie S. Reed, Built 1866 East Boothbay, 50 Ton, 66 Feet" 18 in. x 26

Half-Hull Ship Builder’s Model, New Bedford Whaler, 19th century. Length 49"

M/V Miller Freeman Fisheries Research Vessel Hull 879 with Coast Guard letter and plaque. Good overall condition with some light edge wear. Includes bolts for mounting. Measures at 60" x 11 1/2" x 7"

lot of 2 antique boat maker's half hull ship models mounted on mahog plaques - 10"x22" & 6 1/2"x22"

Builders half-hull bark model, mounted and dated 1860. Reverse with ink inscription of ship's name, makers name, date and other writing. Overall size 15 x 64

A ship builder's half-block model of a New York steamer Early 20th century The pinewood model painted black above the waterline, with details including lifeboats on davits, in mirror backed glass disp

MOUNTED BUILDER'S HALF HULL MODELLate 19th/Early 20th CenturyProbably an ore ship. Hull painted white.Mahogany backboard 15" x 72.25".

Contemporary Boat Maker's Half Hull Model, "Ship No. 18, length 175 ft, Tons 1,802, Geo. Maycock & Co Ship Builders, Leith 1853". Overall 42.5 in. x 9 in. Dimensions Overall 42.5 in. x 9 in.

BUILDER'S HALF HULL MODEL OF THE SAIL/STEAM SHIP "LUZON"Circa 1864By Alexander Stephens & Son Shipbuilders, Linthouse, Govan, Scotland. Hull built up in ten lifts. Bottom finished bright and

BUILDER'S HALF HULL MODEL OF A COASTAL PACKET SHIP19th CenturyBuilt up in eight lifts. Stained a mahogany color. Height 9”. Length 57”. Depth 6.75”.

Old wood half-hull model of a tanker with specifications drawn on ship such as "Oil Separator Lighter" and Built 1941 JS Watson Shipbuilders, Alcock and Ashdown Bombay. Size: 30 x 6 inches.

Vintage Hand Painted Plank on Frame Half Hull Builders Model of the Iron Ship "Centaur", built in Portsmouth in 1865, carved and painted hull mounted on painted backboard. Length 44 in. Height 10 in.

TWO MOUNTED BUILDER’S HALF HULL MODELS19th Century1) Sloop built up in nine lifts. Applied skeg and rudder. Backboard 7.75” x 25.5”.2) Ship built up in eight lifts. Inscribed on back

BUILDER’S HALF HULL MODEL OF A MOTOR VESSELEarly 20th CenturyBuilder’s markings on exterior of hull. Marked on top “Ships’ No’s. 471 + 472”.7” x 46”.

BUILDER'S PLATING HALF HULL MODEL FOR THE SHIPS M.V. "EILDON" AND "RONAN"Circa 1938Built up in six lifts of old pine. Hull plating diagram drawn in India ink, with details of throu

20th century. The hull carved from a solid pine laminated board. The hull painted green above the water line with natural finish below. The rudder applied to the hull. The green backboard with the nam

American primitive paint decorated half hull ship model. Overall good condition.

Half-hull ship model with white painted hull.

Vintage wood half hull model of a side paddle steam ship SF ROTHSAY BUILDER, MCKAY & BEGG, GREENOCK. 37.5 in long x 9 in high.