CASED SHIP MODEL - Builder's Half Hull of Typical

Half-Hull Ship Builder’s Model, New Bedford Whaler, 19th century. Length 49"

White nautical ship builder's half hull boat model. This large boat model is the perfect statement piece for anyone who loves boating or the craft of boat making. The piece can hang on the wall. The d

Vintage Ship Builder's Half Hull Model of a Catboat, circa 1920, Stacked wooden lift construction with painted hull and detailed deck. On original mahogany backboard with cutout on reverse to show hul

Vintage Ship Builder's Half Hull Model, "Lettie S. Reed", mounted on board, depicting a two masted ship with brass name plaque, "Lettie S. Reed, Built 1866 East Boothbay, 50 Ton, 66 Feet" 18 in. x 26

BUILDER'S HALF HULL MODEL OF THE SAIL/STEAM SHIP "LUZON"Circa 1864By Alexander Stephens & Son Shipbuilders, Linthouse, Govan, Scotland. Hull built up in ten lifts. Bottom finished bright and

Vintage Hand Painted Plank on Frame Half Hull Builders Model of the Iron Ship "Centaur", built in Portsmouth in 1865, carved and painted hull mounted on painted backboard. Length 44 in. Height 10 in.

BUILDER'S HALF HULL MODEL OF A COASTAL PACKET SHIP19th CenturyBuilt up in eight lifts. Stained a mahogany color. Height 9”. Length 57”. Depth 6.75”.

BUILDER'S PLATING HALF HULL MODEL FOR THE SHIPS M.V. "EILDON" AND "RONAN"Circa 1938Built up in six lifts of old pine. Hull plating diagram drawn in India ink, with details of throu

MOUNTED BUILDER'S HALF HULL MODELLate 19th/Early 20th CenturyProbably an ore ship. Hull painted white.Mahogany backboard 15" x 72.25".

TWO MOUNTED BUILDER’S HALF HULL MODELS19th Century1) Sloop built up in nine lifts. Applied skeg and rudder. Backboard 7.75” x 25.5”.2) Ship built up in eight lifts. Inscribed on back

BUILDER’S HALF HULL MODEL OF A MOTOR VESSELEarly 20th CenturyBuilder’s markings on exterior of hull. Marked on top “Ships’ No’s. 471 + 472”.7” x 46”.

Builders half-hull bark model, mounted and dated 1860. Reverse with ink inscription of ship's name, makers name, date and other writing. Overall size 15 x 64

A half hull ship model of the SS Oratios Cuppas, Builder Craig, Taylor & Co Ltd., with plaque inscribed 'S.S. Oratios Couppas, owner Nicholas Couppa Esq., Marseilles, Builders Craig Taylor & Co Ltd. S

Painted half hull model of the yacht, "The Sheldrake". Lifts evident under paint. Designer: Winthrop L. Warner. Builder: Paul E. Luke. 1949. (Identified on engraved plaque). 12 x 36 3/4 inches (backbo

Contemporary Boat Maker's Half Hull Model, "Ship No. 18, length 175 ft, Tons 1,802, Geo. Maycock & Co Ship Builders, Leith 1853". Overall 42.5 in. x 9 in. Dimensions Overall 42.5 in. x 9 in.

Vintage wood half hull model of a side paddle steam ship SF ROTHSAY BUILDER, MCKAY & BEGG, GREENOCK. 37.5 in long x 9 in high.

CASED SHIP MODEL - Builder's Waterline Model, fully finished, of Steam Turbine Passenger Liner 'Argentina' (& sister 'Brasil'), Moore-McCormack Lines, New York to Buenos Aires service, Ingalls, Pascag

Late 19th c. Pine Half Hull, not mounted on plaque, unidentified maker and ship, roughly 6" x 42" x 5". Refinished.

MOUNTED ON A 29" X 3" PINE BOARD

Collection of (4) Handmade Ship Models, including: Half hull model of a sailing yacht, blue and white painted hull, 25 1/4" x 7 1/2", surface wear, paint losses, holes and crack in base; Two masted sa

A model of a Yacht on a wooden base, unmarked. Together with a half hull model with text as pictured. Dimensions: The yacht base is 30" x 11 1/2" and 37" tall. The half hull is 26" x 6 1/4". Provenanc

A Carved Wooden Half Hull Model Ship. Half Hulls are exact models of ships hulls, without the mast and rigging, that were used by shipwrights to plan the design of the ship and make sure everything wa

American, 20th C. Of impressive size. Marked with construction details. 16"h x 9' 10"l x 8"d

MOUNTED BUILDER'S HALF HULL MODEL OF THE DOWNEASTER "ST. JOHN"America, 19th CenturyBuilt up in eleven alternating pine and mahogany lifts. Small carved billethead below bowsprit.Dark green b