Eames Molded Plywood Dining Chairs (DCW)

Formed plywood backs and seats over four legs. Each with Herman Miller label. 28.75 x 19.4 x 21.75 in

Pair Eames DCW Dining Chairs. Herman Miller Molded Plywood. -- Dimensions: H: 28.5 inches: W: 17 inches: D: 21 inches ---

Herman Miller Mid Century Modern Early Eames DCW Lounge / Dining Chair Birch Molded Plywood for Herman Miller Evans Products Lounge Chair Circa 1940's 28.5" H 19.5" W 21" L Condition Consistent with A

Charles and Ray Eames for Herman Miller (American) red stained molded plywood dining chair, circa 2009, maker and designer label to underside. Approximate Dimensions: h. 29", w. 19.5", d. 20.25".

Eames Design for Herman Miller, DCW Dining Chair, molded ash plywood, rubber, 28.75 x 19.5 x 23 inches (73 x 49.5 x 58 cm), 5-2-4 screw pattern on base (see photo), unmarked.

Charles and Ray Eames for Herman Miller & Evans Products. Walnut molded plywood with rubber mounts. Evans label to underside. Circa 1950Õs DCW Dining Chair. Dimensions: H: 29 inches: W: 19 inches: D:

2nd generation (1st generation Herman Miller) plywood DCW (Dining Chair on Wood) chair, designed by Charles & Ray Eames for Herman Miller (USA), circa 1950, having molded plywood frame, supported

The Eames Molded Plywood dining chair metal base, known as DCM, is a classic example of the Eameses’ philosophy of using honest materials. The chair, designed in 1946, uses two pieces of molded

The Eames Molded Plywood dining chair metal base, known as DCM, is a classic example of the Eameses’ philosophy of using honest materials. The chair, designed in 1946, uses two pieces of molded

The Eames Molded Plywood dining chair metal base, known as DCM, is a classic example of the Eameses’ philosophy of using honest materials. The chair, designed in 1946, uses two pieces of molded

Charles and Ray Eames, Herman Miller Molded Dining Chair with Chrome Base. Walnut stain finish.

An early Charles Eames molded plywood DCW chair, 28.65"Hx19.6"x21.25"

An early Charles Eames for Evans Plywood Products DCW dining chair having wood laminate seat and back on bentwood frame and a 5 2 5 screw pattern on the underside. Manufactured by Evans Products for H

Eames DCW molded walnut plywood chair designed for the Herman Miller company with 5-2-5 screw configuration and Herman Miller/ Evans Products paper label dating it to 1946-1947. Original finish with e

An early Charles Eames for Evans Plywood Products DCW dining chair having slunk skin hide upholstery on the seat and back and a 5 2 5 screw pattern on the underside. Manufactured by Evans Products for

Molded plywood dining chairs with walnut veneer and chrome base, complementing set of (6), one chair retains part of the foil strip label. (4) of the chairs have been bolted through the back; loss/rep

An original, early, molded DCW Maple wood side chair, by Charles Eames, circa the 1940s. In excellent vintage condition, with the original Evans Products Company manufacturing tag still in tact and at

Chair #1:First generation DCW chairs. 5-2-5 screw pattern underneath. Pre-1950s chairs. Remnants of the "Evans Medal" label underneath. Chair #2: Marked underneath (debossed) as "CW" though is the sam

Charles and Ray Eames, Herman Miller Molded Dining Chair with Chrome Base. Walnut stain finish.

Set of (6) iconic Herman Miller for Eames DCW side chairs in molded plywood with Santos Palisander finish, from Design Within Reach c. 2013. Eames and DWR labels underneath. Dimensions: H 28.75" x W 1

Charles and Ray Eames (1907-1978 and 1912-1988)Three DCM dining chairs, early 21st centuryDesigned 1946Each with sticker to underside: Herman Miller / EamesEach with a veneered molded plywood seat and

Four (4) Charles Eames design by Herman Miller molded plywood chairs. Tags to underside. Good condition. Measure 30 inches tall and 19 1/4 inches wide. Herman Miller COAs dated 7/21/08. These are DCW.

Charles Eames (American, 1907-1978) and Ray Eames (American, 1912-1988) for Herman Miller, United States. DCW chair, designed 1945. Molded plywood and rubber, decorated with painting reminiscent of in

Eames, Ray and Charles for Herman Miller, DCM dining chair, molded rosewood plywood seat and back with chrome legs, measuring 29 by 20 by 20 inches.