Three Charles and Ray Eames Molded Plywood and Metal DCM Chairs and an LCM Chair Height of DCM

Three Charles and Ray Eames Molded Plywood and Metal DCM Chairs and an LCM Chair Height of DCM cha... Chairs and an LCM Chair Height of DCM chairs back 29 3/4 inches, width 19 1/2 inches, depth 19 1/2

molded walnut plywood, chromed metal; unsigned 29 1/2 x 19 1/2 x 22 1/2 in. (74.9 x 49.5 x 57.2 cm.), seat height: 18 in. (45.7 cm.) Provenance: Property from the Collection of William Krisel, AIA

Mid-Century Modern Early Eames Style Molded DCM Chair. A side chair in the style of Ray & Charles Eames DCM chair. Seat and back in red-painted, molded plywood with metal legs. Chock mounts on bac

The Eames Molded Plywood dining chair metal base, known as DCM, is a classic example of the Eameses’ philosophy of using honest materials. The chair, designed in 1946, uses two pieces of molded

The Eames Molded Plywood dining chair metal base, known as DCM, is a classic example of the Eameses’ philosophy of using honest materials. The chair, designed in 1946, uses two pieces of molded

The Eames Molded Plywood dining chair metal base, known as DCM, is a classic example of the Eameses’ philosophy of using honest materials. The chair, designed in 1946, uses two pieces of molded

Charles and Ray Eames (1907-1978 and 1912-1988)Three DCM dining chairs, early 21st centuryDesigned 1946Each with sticker to underside: Herman Miller / EamesEach with a veneered molded plywood seat and

Charles and Ray Eames Plywood, Cowhide and Metal 'LCM' Lounge Chair Stenciled in ink on the underside: '951'. No label. 26 3/4 x 22 x 23 1/2 in., seat height 16 in.

An early LCM molded plywood lounge chair with metal legs. Designed by Charles and Ray Eames in 1946. Made by Evans. Label on the underside reads: Evans, Molded Plywood Division, Evans Products Company

Iconic Eames molded walnut plywood LCM chair (Lounge Chair Metal). Chromed metal base with original glides. Designed by Ray and Charles Eames for Herman Miller with half-board paper label dating it fr

Molded plywood dining chairs with walnut veneer and chrome base, complementing set of (6), one chair retains part of the foil strip label. (4) of the chairs have been bolted through the back; loss/rep

Molded plywood in a black finish on tubular chrome steel bases, including the DTM-2 folding card table, and a set of (3) side chairs. Unmarked. Surface wear including some areas of loss to the veneer,

Charles Eames (1907-1978) & Ray Eames (1912-1988) for Herman Miller, DCM chairs, set of five, USA, 1998, molded ash plywood, chromed steel, rubber, nylon, rectangular black tag, dated paper labels, 19

A Charles and Ray Eames DCM bent plywood chair. Manufactured by Evan Products Company Molded Plywood Division and distributed by Herman Miller. With label on back. 29 1/2"h x 19 1/8"w x 20 1/2"d. Cond

Eames, Ray and Charles for Herman Miller, DCM dining chair, molded rosewood plywood seat and back with chrome legs, measuring 29 by 20 by 20 inches.

Pair of Charles and Ray Eames DCM chairs for Herman Miller, executed in ash plywood and rising on metal frames, 28"h

A PAIR OF CHARLES AND RAY EAMES "DCM" MOLDED WALNUT PLYWOOD, CHROME PLATED STEEL, AND RUBBER CHAIRS, DESIGNED CIRCA 1945, FOR HERMAN MILLER, ZEELAND, MICHIGAN, PRODUCED CIRCA 1950, the molded walnut p

Early production DCM oak bent plywood side chair with factory black metal frame. Designed by Charles and Ray Eames. Manufactured by Herman Miller. Circa 1950. Dimensions: H 29" x W 19.5" x D 20.5" x S

Five chairs: three DCM, one DCW, one Eiffel Tower, Zeeland, MI, 1950s; Walnut, ash plywood, reinforced fiberglass and upholstery, enameled steel; Foil labels to DCM, DCW stamped; DCW: 29" x 19 1/2" x

Charles and Ray Eames (American, 1907-1978 | American, 1912-1988) A Set of Five DCM Chairs Herman Miller, USA walnut plywood, chrome-plated steel Height 30 inches Property from a Private Collection, C

A set of four Herman Miller for Eames black plywood molded DCM chairs having black painted back and seat with metal legs. Sticker on verso. Seat height: 17.5" SHIPPING Atlanta Auction Gallery will not

Charles and Ray Eames (American, 1907-1978 | 1912-1988) Set of Four DCM Dining Chairs Herman Miller, USA walnut plywood, chrome-plated steel applied manufacturer's label to underside Height 29 3/4 x w

Lot 111 Charles and Ray Eames American (20th Century) DCM Dining Chairs, Group of 4 for Herman Miller plywood dining chairs with walnut veneer and chrome base each: 29 x 19 x 19 inches seat height: 18

Dining chairs metal legs. Herman Miller, USA, 1946/1950. Aniline-dyed birch plywood, chrome-plated steel, rubber. 19 1/4w x 22d x 29 1/4h.