Andrychow Tue Lathe

17" swing , 59" between center, built in 1979. 480 volt. The transformer for this is being sold in lot #7. Includes everything on and under it. No shipping ! Call day after sale to verify pick up day.

Chuck attached to it is approx 9 1/2" in diameter. Has been covered up and stored outside. NO shipping. Bring proper help / equipment to load.

Cherry Roll Top Watch Makers Lathe Bench. Cherry roll top bench with 4 drawers, a single door and open compartment below, used condition and overcoated finish; measures 50 in. high x 28.25 in. wide x

A Watchmakers Brass and Steel Mandrel Lathe and Gear Cutting Machine, 19th Century, Each unsigned. Mandrel Lathe: H: 6 1/2 x W: 18 x D: 7 in. Gear Cutter: H: 9 1/2 x W: 12 1/2 x D: 7 1/2 in. From the

Tue Poulsen (Born in 1939)Pair of lampsGlazed ceramicTue Poulsen Studio editionOne lamp signed 'TUE DENMARK'Model created in the 1960sLamp bodies: H 76,5 x D 17 cmIncluding lampshade: H 83 x D 30 cm

Tile top coffee table by Tue Poulsen and Erik Wortz for Willy Beck, Denmark, 1960s.

No shipping ! Comes apart in approx 6 pieces. Bring help to take apart and remove. NO SHIPPING

This has an approx. 8" Swing

W.F. Barnes & John Barnes Co. No.4 Metal Lathe, approx. 34"x39"x44"H ---BUYER TO ARRANGE SHIPPING

Tile-top coffee table with sculptural walnut frame by Tue Poulsen for Haslev Mobelsnedkeri S/A, Denmark, 1960s. Side of table with maker's mark.

American. 1920. Cast mounts with plated steel parts. Stamped, "Dalton New York U.S.A". 16 x 36 x 12". Mechanically functioning. CODE:TOOL

Tue Poulsen (Denmark, b.1939), Two Tile Top Tables1960s, for Haslev Mobelsnedkeri S/A, Denmark, oval tops with inset incised and glazed circular tiles, teak frame with straight rounded legs, including

Louis Levin & Son, Santa Fe Springs, Ca., a watchmakers 8mm lathe with accessories, including a cross slide, milling attachment, tip over T rest, filing rest, collet holding tailstock, motor, backshaf

A turn of the century Boley & Leinen 6mm watchmaker's lathe. Steel body with Brass fittings, numerous attachments include a 6-jaw chuck, fixed and feeding tailstocks, center rest, sliding table, small

G. Boley, Germany, a nice plain bearing Geneva pattern lathe with box and accessories, including plain and lever feed collet holding tailstocks, 50 collets including wheel and ring chucks, offset driv

F.W. Derbyshire, Waltham, Mass., a good "Model 750" lathe with accessories, cast iron bed with 10 mm ball bearing headstock and lever feed 10mm collet holding tailstock, compound slide rest, tip over

A large lathe with associated tools.

Tue Poulsen (b. 1939) table lamps, pair Denmark, 1960s ceramic, linen, brass, plastic impressed signature includes shades 16"dia x 29"h

A 19TH CENTURY CAST BRASS AND STEEL WATCHMAKER'S LAITHE together with parts 51cm overall

Teak coffee table with tile top by Tue Poulsen for Haslev, Denmark 1960s.

Schaublin machining tools, watchmaker's tools for lathe, slide on pieces. Good condition.

An 8mm watchmakers lathe with 74 collets, the lathe unmarked, with tip over tool rest and tailstock, mounted to a Borel mount with motor, together with a Boley box containing 74 collets by Boley, Wolf

Belt-Driven Metalworking Lathe, c. 1930 Precision machine tool, suitable for smaller workshops, including bed, carriage with cross-slide, headstock and tailstock, 25 2/5 in. wide. With numerous access

This Unimatt lathe is the model SL DB200 with one auto feed lathe bed, two manual feed lathe beds, and one lathe bed for duplication. There are two individual motor sets (cast metal not plastic); spar