A MODEL OVERHEAD CRANK STATIONARY STEAM ENGINE,

A MODEL VERTICAL OVERHEAD CRANK STATIONARY STEAM ENGINE, 20TH CENTURY, the heavily cast and machined 6-spoke flywheel fitted to one end of the overhead crankshaft, supported by a pierced cast plate an

Dimensions: 5.5" H x 6.5" W Shipping is the buyer's responsibility! We recommend obtaining a quote from a third party shipper prior to bidding

A MODEL UNDERTYPE STATIONARY HORIZONTAL STEAM ENGINE, ENGLISH, DATED 1894, with metal plaque engraved F. LAWRANCE 1894,the single cylinder with eccentric driven slide valve, the valve chest with maker

Vintage Steam Engine, with double wheels and red stack, with burner, unmarked, set on a rectangular beveled edge wooden base, 11 1/2" high, 10 1/4" x 4 3/4". As is, one wheel loose and metal stem deta

Vintage German Made Stationary Model Steam Engine, by Marklin, with rectangular Marklin metal plaque affixed to side, set on a lacquered metal base, 15" high, 4 3/4" sq. As is, missing parts and burne

20TH C. TIN TOYS - LOT OF THREE Tin plate toys, circa 20th century, includes: Mamod stationary model steam engine with brass tank Model Greyhound Lines Scenicruiser, made in Japan 

Large stationary steam engine model hand built and mounted into a wood box display. Apparently unmarked. Approximate height 9.5", width 15.6", depth 9".

This is a very cool rarer c1935 Marklin stationary steam engine. It is model 4097/6 and appears complete and original WITH ORIGINAL BURNER AND FUNNEL. 15" tall x 12" x 12". Tried to test it and it's m

A Late Victorian model of an over-crank steam engine, supported on four columns with 11.5cm spoked flywheel, eccentric linked steam valve and wishbone connecting rod to single vertical cylinder. Heigh

Large Working Model of a Stationary Twin-Cylinder Undertype Steam Engine, c. 1975 Extremely detailed model, brass, steel and cast-iron parts, partly finished in green, coal-fired, soldered brass flame

Working Model of a Stationary Single-Cylinder Overtype Steam Engine, c. 1960 Extremely detailed engineering model, brass, steel and cast iron, gas-fired, brass boiler, 7/8 in. cylinder, attached chimn

ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY BEAM MODEL STEAM ENGINE, design of Watts parallel motion, cast-iron base with raised lettering "STUART" and impressed "80083", brass and steel, pai

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY VERTICAL MODEL STEAM ENGINE, cast-iron, steel, and brass, green painted base fitted with four tabs for securing base, vertical form of a

ATTRIBUTED ENGLISH STUART TURNER MODELS MIXED METALS STATIONARY VERTICAL V10 MODEL STEAM ENGINE AND FEED WATER PUMP,cast-iron, steel, and brass, base fitted with two tabs for securing base and some po

A steam mill engine stationary model by PM Research. Bronze & Iron casting Mill with twin cylinders.

Extremely fine and well executed machinist built model of an inverted vertical "Georgina" over-crank steam engine, designed by T.D. Walshaw, circa 1830, with an inverted vertical cylinder of approx. 5

Model hand built steam engine with live stationary twin piston drum engine Drive belt present but needs to be replaced. 6"H x 7 3/4"W x 7 1/2"D

A MODEL OF A 'PENDULOUS' OSCILLATING STEAM ENGINE, ENGLISH, EARLY 20TH CENTURY, the twin heavy architectural A-frames supporting the overhead crankshaft with centrally-mounted 6-spoke flywheel, a whee

Stuart Walking Beam Model Steam Engine, c. 1980 Stuart Turner Ltd., England. Polished steel, cast iron and brass, with a cast single center pillar supporting an overhead balancing beam complete with W

Horizontal Steam Engine, c. 1925 Heavy precision model, of steel and cast iron, double-action cylinder Ø 3 1/5 in., flywheel Ø 9 3/5 in., bar-type crosshead guide, counterbalanced crank, eccentr

Live-Steam Model of a 6-Column Beam Engine, c. 1985 England, all-brass construction, with 6 pillars supporting an overhead walking beam with parallel motion, single-cylinder, Ø 1 1/3 in., spoked 5

Live-Steam Model of a 6-Column Beam Engine "Lady Stephanie", c. 1985 With maker's plaque "Kølsen Maskiner, Danmark, No. 051", brass, steel and cast iron, 6 brass pillars supporting an overhead walk

20"x42"x24" working model steam engine, has been sitting in a museum, has not been run in years, WOW! - - -BUYER TO ARRANGE SHIPPING

Has good color, shows wear and paint loss throughout, dual chamber, top pipe has been resoldered, displays well, marked D.R.G.M. 193033, 14x9.75x10.75", rated 7.75