A large ship builder's half hull model of the transitional steamer Corinth

White nautical ship builder's half hull boat model. This large boat model is the perfect statement piece for anyone who loves boating or the craft of boat making. The piece can hang on the wall. The d

Vintage Ship Builder's Half Hull Model of a Catboat, circa 1920, Stacked wooden lift construction with painted hull and detailed deck. On original mahogany backboard with cutout on reverse to show hul

Vintage Ship Builder's Half Hull Model, "Lettie S. Reed", mounted on board, depicting a two masted ship with brass name plaque, "Lettie S. Reed, Built 1866 East Boothbay, 50 Ton, 66 Feet" 18 in. x 26

Half-Hull Ship Builder’s Model, New Bedford Whaler, 19th century. Length 49"

Late 20th c. Info on back, 50” by 11” by 4 1/2”

MOUNTED BUILDER'S HALF HULL MODELLate 19th/Early 20th CenturyProbably an ore ship. Hull painted white.Mahogany backboard 15" x 72.25".

BUILDER'S HALF HULL MODEL OF THE SAIL/STEAM SHIP "LUZON"Circa 1864By Alexander Stephens & Son Shipbuilders, Linthouse, Govan, Scotland. Hull built up in ten lifts. Bottom finished bright and

BUILDER'S HALF HULL MODEL OF A COASTAL PACKET SHIP19th CenturyBuilt up in eight lifts. Stained a mahogany color. Height 9”. Length 57”. Depth 6.75”.

Contemporary Boat Maker's Half Hull Model, "Ship No. 18, length 175 ft, Tons 1,802, Geo. Maycock & Co Ship Builders, Leith 1853". Overall 42.5 in. x 9 in. Dimensions Overall 42.5 in. x 9 in.

TWO MOUNTED BUILDER’S HALF HULL MODELS19th Century1) Sloop built up in nine lifts. Applied skeg and rudder. Backboard 7.75” x 25.5”.2) Ship built up in eight lifts. Inscribed on back

BUILDER’S HALF HULL MODEL OF A MOTOR VESSELEarly 20th CenturyBuilder’s markings on exterior of hull. Marked on top “Ships’ No’s. 471 + 472”.7” x 46”.

A ship builder's half-block model of a New York steamer Early 20th century The pinewood model painted black above the waterline, with details including lifeboats on davits, in mirror backed glass disp

Builders half-hull bark model, mounted and dated 1860. Reverse with ink inscription of ship's name, makers name, date and other writing. Overall size 15 x 64

Tow boats, Transfer 13 and 14, Hulls 33-34. New York, New Haven & Hartford R.R. Co. 1899-1900. Backplate 12.5 x 55.5 inches.

BUILDER'S PLATING HALF HULL MODEL FOR THE SHIPS M.V. "EILDON" AND "RONAN"Circa 1938Built up in six lifts of old pine. Hull plating diagram drawn in India ink, with details of throu

Vintage Hand Painted Plank on Frame Half Hull Builders Model of the Iron Ship "Centaur", built in Portsmouth in 1865, carved and painted hull mounted on painted backboard. Length 44 in. Height 10 in.

Vintage wood half hull model of a side paddle steam ship SF ROTHSAY BUILDER, MCKAY & BEGG, GREENOCK. 37.5 in long x 9 in high.

M/V Miller Freeman Fisheries Research Vessel Hull 879 with Coast Guard letter and plaque. Good overall condition with some light edge wear. Includes bolts for mounting. Measures at 60" x 11 1/2" x 7"

Large vintage carved and painted wood half-hull model of the CAMBRIAN built by Green and Lowden of London in 1854. 57 in long x 13.5 x 3.5 in deep.

Large ships half model of a sailing ship. Black hull mounted to a red board. Dimensions: 60 long by 10 tall

Large boat model or ship builder trade sign. The hull is painted white with sky blue and yellow trim and yellow rudder. The name "Bunny Lad" is painted on both starboard bow and port bow. The words "D

Large old carved wood half hull model NO. 221 CABLE SHIP. 5 ft. long (60 in.) by 10.5 in high.

A half hull ship model of the SS Oratios Cuppas, Builder Craig, Taylor & Co Ltd., with plaque inscribed 'S.S. Oratios Couppas, owner Nicholas Couppa Esq., Marseilles, Builders Craig Taylor & Co Ltd. S

An early 20th century half hull model of a freighter, the superstructure showing a mockup of the wheelhouse and upper deck engine room, remnants of a builder's decal affixed to the hull noting 'Montre