ANTIQUE ATWATER KENT RECEIVING SET W/ HORN SPEAKER

Atwater Kent receiving set Model 30 radio, Serial No. 579743, 6 ½ inches high x 20 inches wide, and a metal horn speaker Model "H", 22 inches high.

Radio contains three tubes. Speaker has been tested using a modern audio amplifier connected to an 8 ohm to 600 ohm matching transformer; it works and plays music; producing reasonably good tone for a

Model 20 Atwater Kent receiving set with five tubes inside; Schematic drawings included; Wooden case and power cord; No damage observed; Case measures approximately H 6 x W 19 1/2 x D 5 1/4 inches; Wo

Atwater Kent Model 10 Receiving Set, 1924 Breadboard model, 3 circuits, MW, 3 type-F variable condensers, type-TA amplifier with 3 tubes, battery-operated, for external speaker, width 29 in., very goo

This is an exceptionally clean example of this classic radio. Dimensions: H 6" x W 20" x D 6.5" Condition: Untested; sold as-is. All 5 tubes are present; unit seems complete - even the cloth cable loo

DESCRIPTION: Two antique horn speakers. Includes: 1) Atwater Kent Model L. 19" high. Bell 14-1/4" diameter. Alligatoring to finish. 2) Therola number 4. 21-3/4" high. Bell 14-5/8" diameter. Chip to ba

Untested. Approx. 17"w x 5" tall

11 1/4" w x 13" T metal frame circa 1928 - 30

A rare early radio 5-tube set; tubes are absent. Included speaker is an Atwater Kent type M loudspeaker with a large, heavy steel horn. Speaker has been tested using a modern audio amplifier connected

On an iron base. 13"H. x 10 1/2"W

Atwater Kent Model 20, 5 tube radio with cygnet style speaker.

Atwater Kent Receiving set Radio.Model 21 compact.

Atwater Kent Radio - Receiving Set. Serial #482793. Has Tubes. Measures approx. 6.5" tall x 20" wide. Please read the terms and conditions. This sale will be broadcast live on sale day with full descr

A grouping of (2) Atwater Kent sets. The smaller is a model 20. It has all tubes present but is missing one of the front panel knobs. The larger set is a model 32. This is a sophisticated 7 tube set w

No tubes.

Wood flip top case. 20x6"

Grouping of (3) of these very popular early radios. One of the three appears to be complete, with all tubes and coils present - one has the coils but is absent (1) tube, and the third set is absent al

All Metal. Measures approximately 21 inches tall by 13 inches.

All Metal. Measures approximately 19 inches tall by 11 inches.

Atwater Kent Model L Metal Horn Speaker. 19-1/2"h. Condition: Repainted and wood base not original.

Atwater Kent, Philadelphia, Penn., "Radio Receiving Set #3945" or "Model 2" breadboard type radio receiver with walnut base and brown bakelite knobs and dials, two tuners and three 01A tubes

Atwater Kent Model H Speaker Horn. No electrical/electronic parts. Metal parts only. Dusty.

LOT (3) INCLUDING (2) ATWATER KENT MODEL 35 "COFFIN" BATTERY RADIO RECEIVERS, C.1926, HEIGHT 5 1/2"; WIDTH 17" AND ATWATER KENT MODEL R SPEAKER, HORN, HEIGHT 16"

ATWATER KENT RADIO PHONOGRAPH LOUD SPEAKER HORN Phonograph radio "Model R" horn made in Philadelphia by the Atwater Kent Co. Horn size: 12" Size: 16"