DOLL STATIONARY LOCO OVERTYPE STEAM ENGINE

Bertoia BASICS Online: BING #13675 LOCO OVERTYPE STATIONARY STEAM ENGINE circa 1902, burnished engine, boiler, wooden base, beveled firebox, water level glass, whistle, pressure valve, speed control,

Unusual form on embossed litho support mounted to cast iron base, 9 X 5.5:. Shine brass boiler with burner and screened stash. This will polish nicely. Excellent.

Twin cylinder overtype; smallest in the model 502 series of three; cast iron firebox with 3 vents. Original brick type stack. Fairly elaborate with ladders and platforms, twin flywheels, etc. Conditio

Working Model of a Stationary Single-Cylinder Overtype Steam Engine, c. 1960 Extremely detailed engineering model, brass, steel and cast iron, gas-fired, brass boiler, 7/8 in. cylinder, attached chimn

Pre War Doll & CO. Germany stationary Locomobile horizontal twin flywheel toy steam engine with cast metal base. Appears to be in overall good cosmetic condition with paint loss, light surface rust, a

circa 1935, features Bing firebox, Fleischmann raised piston assembly, and 9" stack. Base 10" x 9" x 7".

Steam toys (3), all engines, 1 marked Doll Mfg Stationary Steam engine, c.1898, other 2 unmarked, all VG cond, up to 9.5"H.

Doll et Cie German Toy Steam Engine. Worn from use. Dusty. Missing stack.

Large Stationary Steam Engine by Doll, c. 1935 Nuremberg, no. 520/4, fixed cylinder, length of the boiler 12 ¼ in., Ø 4 in., boiler support, 2 boiler galleries with stairs and railings, two

Stationary Steam Engine by Doll, c. 1927 Nuremberg, no. 510/3, fixed cylinder, length of the boiler 11 in., Ø 3 1/2 in., 2 boiler galleries with railings, with water level gauge, safety valve, st

One is marked Doll Company Made in Germany. Steam engine has red brick original stack. Looks to be moderate to heavy use. Larger lineshaft has weighted lever-operated clutch but with little paint on b

Steam toys (3), Doll Mill-Water Wheel #703, c.1930, appears to be orig, needs cleaning, water wheel slightly bent, no duck, VG cond, Weeden Steam Engine Overtype 21, appears to be orig, missing weight

One is on a platform, has DC made in Germany metal emblem on side of steam engine. The second is more stationary on footed base. Condition: (Very Good). Dimensions: Largest: 11 - 5/8" x 10 - 3/4" x 7

American. 1900s. Cast iron, brass, copper. Used as a salesman sample. Maker unknown. 8.5" x 10" x 6".

A MODEL VERTICAL OVERHEAD CRANK STATIONARY STEAM ENGINE, 20TH CENTURY, the heavily cast and machined 6-spoke flywheel fitted to one end of the overhead crankshaft, supported by a pierced cast plate an

Large stationary steam engine model hand built and mounted into a wood box display. Apparently unmarked. Approximate height 9.5", width 15.6", depth 9".

Has a great look, cylinder is free and wheel spins freely, has oiler, shows some wear and paint loss, displays well, not marked, mounted on a slab of wood, heavy, 17.75"x25", rated 8

DOLL steam engine, Ref. 407/3 (1925-1927), lying boiler, surface area: 41x25.5 cm, with burner, funnel, pipe, manometer, feed pump, dynamo, lamp, lampshade is missing, base plate was colorwise retouch

Includes original wooden box marked 1 only 4F steam engine, with label on one end. Original box is missing top sliding piece. Engine itself is horizontal with original red stack. Condition: (Excellent

Earl example with fancy tile floor mounted to 16.5 X 7.5” wood base. Includes burner, dynamo with switch & night. Base shows some staining in center, otherwise presents well. Very Good.

This is a very cool rarer c1935 Marklin stationary steam engine. It is model 4097/6 and appears complete and original WITH ORIGINAL BURNER AND FUNNEL. 15" tall x 12" x 12". Tried to test it and it's m

DOLL steam engine drive model, sawmill with water wheel and water tower, surface area: 33.5 x 29 cm, sheet metal, handpainted, around 1900, the scratches on the paintwork are caused of old age , used,

DOLL steam engine, lying boiler, surface area was colorwise retouched, 37 x 42 cm, polished boiler, with a diameter of 8 cm, manometer, whistle, water level glass, with original burner German Descript

Nice early example dampfmaschine with tin tile floor mounted on 11 X 9.5” wood base. It includes its burner and scarce filler cup, just missing the streetlamp whistle. It would benefit from a cleani