American Brass Locomotive Bell

American Flyer wide gauge 4696 4695 brass piper steam locomotive with 4693 tender. The locomotive has a lighted fire box and bell, some paint wear on the pilot and roof, otherwise very nice, C7. The t

Standard gauge. Top of the line piper for AF. Loco is intact, rewheeled with brass wheels, equipped with operating bell mechanism; 4693 Vanderbilt tender. Both have nice castings with just a bit of pi

Standard gauge. Top of the line steam loco for AF. This example has good castings. It is missing a side rod and part of the bell mechanism. The wheels have been redone in brass, and it has a matte pat

3 Mantua Locomotives : Two N scale Great Northern 4-4-0 American Locomotives. Model # 394-061, 369-025, die cast construction, replaceable brass bearings, operating headlights brass bell and domes,

Very nice early brass locomotive bell. Matching brass finial. Cast iron cradle and yolk made by Howard. Interior repainted red. Condition (Excellent). Size 19 -1/2" T.

Solid piece, no markings, red painted bell interior, 25 inches tall, 16 inch bell diameter, no shipping due to weight Line Item # 67

Very nice early brass locomotive bell. Cradle and yolk made by Howard. Interior repainted red. Condition (Excellent). Size 21 -1/2" T.

A heavy little bel with 12" diameter. It also stands 9" on the bell height. With the yoke it measures 25" tall. It mounts flat (not a curved boiler). It is probably from a gas car or electric locomoti

Diameter measures 13" x 23" tall

12" diameter x 18.5" tall with cast yoke and acorn finial

12" bell diameter. The case yoke is 20" tall with acorn finial.

Brass Locomotive Bell - 10 1/4" diameter Brass Locomotive Bell - 10 1/4" diameter. The base has two mounting holes and a slight curvature to the base which would have allowed it to sit flush against a

Diameter measures 14-1/2" x 20" Tall

Stamped PRR (Pennsylvania Railroad), 15.75" diameter of bell x 20.5" tall. Iron frame.

From a New York Central "Pacific" 4-6-0 #805 Steam Locomotive. 16.5" diameter x 23" tall. Called a Ten Wheeler, built 1905-1908

12" diameter x 18.5" tall in triangular yoke

Called the Yard Goat. Diameter measures 13" tall x 21" tall

Mounted on board and bracket. 8" diameter x 9.5" tall on the bell. Cast brass example in excellnet condition

11" diameter x 12" high. Unmarked. IMPORTANT: Before bidding, please read the terms and conditions below. When you registered for the auction you agreed to these terms and will be required to comply w

Railroad bell is air powered. Bell is approx 12" in diameter and 10 3/4" tall. It is mounted on a rolling stand. No shipping.

Cast Brass Steam Locomotive Bell. Circa 1890. Along with a cast iron Yoke mount. Bearing illegible numbers. Along with the number 6678 on the bell.. Condition- Rust on Yoke Verdegris finish on bell. 1

14 1/2" Diameter Brass steam locomotive bell. The bell is polished brass with a repainted red interior. Equipped with a Trans Devices ringer. The bell itself is otherwise unmarked. The yolk has 12 V S

10" Diameter Brass Steam Locomotive Bell Bell measures 10" in diameter with an acorn top nut. The yolk has been repainted and appears to have MD 227 cast in near the bottom. The bottom plate is curved

Unmarked 12" x 16" tall