CUSTOM BAMBOO FLY ROD

CUSTOM BAMBOO FLY ROD made for Jim Welch. Excellent original condition. Three-piece, two tip model with all parts equal in length. All pieces measure 32 3/4 inches unassembled. A very fine special ord

ORVIS & BILL CRITCHFIELD CUSTOM BAMBOO FLY RODS, ORVIS 8', BATTENKILL WITH 1 TIP, CRITCHFIELD 7'2" W/ 2 TIPS

Custom Care 3pc bamboo fly rod, 7'2", DT4-WF5 line wt., "Paul Young Driggs River Special", in sock and factory tube.

Lot includes a single vintage custom Orvis bamboo fly fishing rod, 8'6". Overall good condition

RARE HS Gillum (Harold Steele) custom built (3) piece bamboo fly fishing rod measuring 11'9" and weighing exactly 1 lb. The two tips appear to be nice and straight however one is missing a guide. This

4pc bamboo fly rod, 7', #5wt, rod marked Aroner "Amherst" - Joes Tackle, in sock and factory tube. Excellent.

3pc bamboo fly rod, 7'6", #4wt, 3 1/4oz, maker - M. Ruke, in sock and factory tube. Excellent.

3pc bamboo fly rod, 7'6", #5, 3 1/8oz, maker - M. Ruke, in sock and factory tube, very minor wear marks to reel seat. Excellent.

3pc bamboo fly rod Model "Payne 96 Taper", 6 1/2', 2 1/4oz, #3/4wt by M. J. DeSapio - maker.

3pc bamboo fly rod, 7', maker - Z. Pryor, in sock and factory tube. One rod tip broken, tip and guide is attached, otherwise Excellent.

3pc bamboo fly rod, 7'6", 4wt, marked "BTCR", in sock and factory tube. Excellent.

Excellent condition, 2/2 quadrate made by “Sam” Carlson, serial 716-472 (along with 069398 inked above the handle). Other than mild cork soiling, there are no other signs of use. Comes in

Made as a one-of-a-kind custom set of 3 rods with Goodwin Granger tapers, all are unfished and in mint condition. Rod #1: 8', 3/2, rated for #5 lines. It has translucent wraps tipped red, black snake

3/2, tag states: “stained & oxidized”. With the original bag, tag and brass-capped tube.

All sections on this excellent condition 2/2 rod are marked with serial #80101 in black ink. The name ‘Catskill’ and model number are written in ink under the signature wrap. The butt cap

This 2/2 rod is in excellent condition save for minor ridging of the cork handle and mild sets. Michael Montagne is signed on one flat, on the opposite flat the inscription is much fainter and appears

2-pc. 1-tip rod in excellent condition with mild soiling of the handle. Inked on the butt is: “Beaverhead Rods by W. Maca Patent Pending 250cm #5” @*%+!”. Unique to this rod are the

2/2, serial 109, with no signs of use, near mint (both tip ferrules have surface tarnish). With a light khaki bag and brass-capped tube.

FE Thomas Special Multi-Piece Set Bamboo Fly RodA unique set whereas all sections include full intermediate silk wraps. One butt section is 22.5 in. length; the other butt section is 32.5 in. length;

A Bernard Ramanauskas fly rod built for Scott, rated for #5 lines, this 2/2 rod has truncated Swiss style ferrules, a straight-tapered cork grip (lightly soiled), agate stripper, translucent yellow wr

2/2, 4wt, serial 3424 on all sections, near mint, coming in the original bag with labeled tube (brass caps).

Excellent 3/2 rod, probably a model #40 Fairy Catskill with early intermediate wraps and ‘Tournament’ stamped butt cap, weighing 3.4 oz and having the original disk-type ferrule plugs and

Payne Abercrombie and Fitch Bamboo Fly Rod E. F. Payne Rod Co. (1894-1968) Highland Mills, NY for Abercrombie & Fitch Co. 7 ft. 1/4 in. Each section measures approximately 42 1/2 in. Marked "PAYNE REG

2/2, inscribed: “Bob Summers, 7’ 6” 3oz. #4 line” (the inscription is varnished over but the rod itself has a dull finish and may be impregnated), when assembled, this rod is 3