GLASS CASED SHIP MODEL, a steam powered 3-masted s

Lot of 2 old glass bottles with ship models inside - one of NY #4 yacht and a 3 masted clipper ship. To 8 in long. VG condition.

Cased wooden model of a 3-masted ship, case 32" H x 37 1/2" W x 15 1/2" D; ship approximately 28" L (overall). Provenance: Athanas, The General Glover House, Swampscott, Massachusetts.

Hamilton, Ontario. Ca: 1880. Pine, wire mesh, string, cotton, glass. Extremely well detailed model of a three-masted vessel, under steam power with the sails down. Four well carved figures on deck. Br

The model of what appears to be a transitional ship powered by both wind and steam is presented in an early mouth-blown bottle displayed on a walnut stand. Measures 3.5 x 9 x 2.5 inches without the st

Early 1900's mahogany-cased ship model of a steam yacht, 30 in long. Painted wood with plaster ocean. Case is 35 x 21.5 x 12 inches.

Sailing (3) masted ship model "FLYING FISH" (Boston). Case 14 1/2" x 36 1/2" x 26" Ht.. Provenance: The Edward Herrmann Estate, Salisbury Connecticut.

Vintage Miniature Wooden 2 Masted Ship Model under glass dome. Length at the base is approx. 16 inches, width is approx. 7 1/2 inches and dome height is approx. 11 inches.

Live steam engine ship model, very detailed wooden construction, case and ship show signs of light wear and age, ship marked "Clermont", displays well and has great maritime look, 24x42x13" in glass d

Queen Mary Large Steam Ship Model with Glass Case. Marked to Bow" Queen Mary" and to Transom "Queen Mary Liverpool". Glass Case has Brass Plaque RMS Queen Mary, Cunard White Star Lines, 30,774 Tons. S

Titanic Large Steam Ship Model with Glass Case. Marked to Transom "Titanic Liverpool" and on both sides of the Bow. Steam Ship is approx. 72" L x 9" W x 27" H. Glass Case is 79" L x 34" H 13" W. Condi

Folk Art Sailboat Ship in Display Case Model. Delightfully detailed 3 masted sailing ship is painted blue & white, and is populated with a tiny crew of sailors in uniform. Two anchors made of small se

Intricately rigged (3) masted tall ship with a single dory, and a carved figurehead of a full bodied male, titled "Gladiator". 47 x 63 1/2 x 25 inches excluding base.

CASED SHIP MODEL - Builder's Waterline Model, fully finished, of Steam Turbine Passenger Liner 'Argentina' (& sister 'Brasil'), Moore-McCormack Lines, New York to Buenos Aires service, Ingalls, Pascag

Three Masted Sailing Ship Model in glass case height 24 1/2 inches, top 14" x 31 1/2"

Ship model of the Cunard Ocean liner Queen Elizabeth II. Finely crafted model with great detail. Fitted to a display case. Case dimensions 28 1/2" x 7" x 7 1/2". Model dimensions: 24" x 3 1/2" x 6". P

Cased ship model of the "Wasp" by Paul Reck, 2013, model appx. 37" w, case measures 30 3/4" t x 41 1/2" w x 15 1/2" d, in very good condition. The Wasp was a 509 ton sloop of war for the United States

Naive Four-Mast Ship with white hull, probably sailor-made, circa 1890-1900, not identified, fully rigged but with no sails, mounted on a blue painted plinth, set on an oak base with unframed glass co

Barque in Heavy Seas, by C. Brookings Wetherbee, Jr. of Canton, MA. Label on underside. In black painted glass case, 6" x 8 1/2" x 4 1/2".

Detailed model ship depicting the Brikbarca style of ship that was popular in the 17th century, housed within wooden and glass display case with map forming the backdrop, plaque reads "Brikbarca (

Fine old wood model of a 3 masted clipper ship with name plate SEA WITCH, NEW YORK NY. Has solid wood painted hull and is fully rigged (needs some re-working and minor repair on rigging). Size: 41 in

Nova Scotia. Mahogany, brass, string. Carefully detailed model of a steam-powered boat made of mahogany, with brass fittings and red, black, green, and gold painted detail. The boat is mounted on a re

Model of the Two Masted Brig "Topaz", with black hull, green bottom, set on a maple base with brass name plate on each side, based on a merchant sailing ship built at Newburyport, MA in 1807, in a Ple

Three masted sailing vessel with rigging. Appears complete. Dimensions: (Plexiglass case) H 29.5" x W 34.5" x D 14.5" Condition: Model dusty. One panel of plexi coming unattached.

Large scale model of 3 masted British Clipper ship "Cutty Sark" in custom lighted showcase. 64"h x 100"l