Japanese Style Brass Diving Helmet Tee Wrench

Nice vintage tee wrench consistent with a style used with Japanese diving helmets. Has CDC stamped on it. Measures 3 and 7/8 inches long and the handles is 3 and 15/16 inches wide. Please refer to pho

This is a vintage US Navy Mark V diving helmet tee wrench. This tool is used to secure and remove the wing nuts on the Mark V helmet. Good original used condition, made of brass. All items will be shi

Cast brass Tee used on the Mark V diving helmet breastplate wing nuts. This was the standard tool used to remove and install the Mark V diving helmet wing nuts. Great piece to have on display next to

Cast brass spanner wrench commonly used on the Mark V diving helmet breastplate wing nuts. This wrench gives the user greater leverage in turning wing nuts over the standard Tee wrench. Wrench is in e

Classic example of the traditional Korean or Japanese diving helmet. This is a 3 light (3 windows) 12 bolt (12 breastplate studs) model helmet. Made with a copper body and brass hardware, this style o

This is a grouping of three brass diving helmet wrenches. All three have the name Buskirk stamped into them. All three pieces are in excellent original condition. All items will be shipped with a sign

Miller Dunn Co. Antique "Divinehood Style 3" Brass Diving Helmet Accompanied by Three Metal Tags. Inset company tag en verso. Measures 26" x 13" x 13". Estimate: $1000.00 - $3000.00 Domestic Shipping:

The Yokohama Diving Co., Ltd 12 Bolt Japanese Copper and Brass Diving Helmet Presented on a Associated Wooden Base. Company emblem attached to the surface. Helmet measures 17" x 14-1/2" x 16-1/2". Est

Nice original tee wrench for use on US Navy Mark V diving helmets wing nuts. Unlike most tee wrenches, this one is clearly stamped DESCO on the handle. Old yellow cord also wrapped on the wrenches han

This is an authentic example of the classically designed diving helmet prevalently made in Japan and Korea during the 20th Century. We are unsure of the manufacturer as no names or ID plate was applie

Vintage brass faceplate for a Japanese, Korean, or Chinese diving helmet. Outside diameter is 6.5 inches across. There is no gasket or glass present. The inner brass ring to secure the glass is presen

Grouping of seven brass diving helmet wing nuts. We are not sure of the specific model of helmet these would be used on, but possibly on Japanese, Chinese or Korean helmets. All are in good condition,

This is a genuinely nice example of the classically designed diving helmet prevalently made in Japan and South Korea during the 20th Century. We are unsure of the manufacturer; the original brass ID p

This is an authentic example of a classic style of vintage diving helmet primarily made made in Japan and Korea during the 20th Century. We are unsure of the manufacturer or country of origin. The ori

Wonderful original example of a KIM Korean diving helmet. This is a 3 light (3 windows) 12 bolt (12 breastplate studs) model helmet. Made with a copper body and brass hardware, this style of helmet ha

This is a nice original set of diving helmet brails or straps for a Yokohama Japanese diving helmet. The straps are brass and well used. Each has a corresponding number stamped on the end to ensure pr

Presented here is a very nice and attractive diving helmet bonnet. The manufacturer or country of origin is unknown but it fits the style of helmets made in Japan or Korea. The only possible identifyi

Presented here is a very nice and attractive diving helmet bonnet. The manufacturer or country of origin is unknown, but it fits the style of helmets made in Japan or Korea. The helmet features a wond

This is a relatively larger size miniature antique diving helmet. Made of copper and brass, this piece measures 10.5 inches tall, 11 inches wide, 10 inches deep and weighs 8 pounds. Good overall condi

This is an excellent example of a Snead Company shallow water diving helmet. The helmet is made of cast iron with an acrylic window. A small brass threaded air fitting is located behind the handle on

Quality Handmade Reproduction of Vintage U.S. Navy Diving Helmet Mark V, Aqualung with aging effect. Made of solid steel iron and brass metals. Full Size: approx. 18 inch (45.72 cm) Head size: approx.

This is a vintage USN Mark V diving helmet air control valve. It is made of solid brass and was the first configuration used during the first half of the 20th century. In the 1916 US Navy diving manua

Nicely made lobster trap style wood display stand for a diving helmet. This stand can be used to set a USN Mark V helmet on or other copper and brass helmet made during the 19th and 20th Centuries. St

A group of four ethnographic adornments. 20th century. ++ Helmet. Possibly Naga. India. 7 7/8" x 17 5/8" x 5 3/4". ++ Wood box with cover. Japan. 6" x 7 1/2" x 1". ++ West African style brass necklace