Plexiglass and Plywood Side Chair

Plexiglass and Plywood Side Chair Late 20th century Signed indistinctly. Height 37 inches, width 16 1/2 inches, depth 22 1/2 inches. C Property from the Estate of Jacqueline Loewe Fowler

The Eames Molded Plywood dining chair metal base, known as DCM, is a classic example of the Eameses’ philosophy of using honest materials. The chair, designed in 1946, uses two pieces of molded

The Eames Molded Plywood dining chair metal base, known as DCM, is a classic example of the Eameses’ philosophy of using honest materials. The chair, designed in 1946, uses two pieces of molded

The Eames Molded Plywood dining chair metal base, known as DCM, is a classic example of the Eameses’ philosophy of using honest materials. The chair, designed in 1946, uses two pieces of molded

Dimensions: H 31" x W 17" x D 19" x SH 18" Condition: Wear consistent with age and use including a few small tears to upholstery at edges, nicks and scuffs to legs, small stress crack where leg joins

Charles Eames For Herman Miller DCM Plywood Side Chair: Plywood back and seat, chrome frame, white feet caps. Black rubber stoppers have been repaired. Small veneer repair. Label on bottom

Modernist Conover Style Plywood Side Chair. Plywood seat and shaped back with olive paint trim. Black iron frame and 3 shaped legs. Swivels.-- Dimensions: H: 30.5 inches: W: 18.5 inches: D: 18.5 inche

Painted Plywood and wrought iron side chair. 32"h x 21"w x 20"d

Molded teak plywood with iron legs. 32 1/2"h. x 17 3/4"w. 20 1/2"d.

Set 8 THONET Molded Plywood Side Chairs. Stained in different colors. Branded Thonet Originals. -- Dimensions: H: 30 inches: W: 18 inches: D: 19 inches ---

Set of Six - 30.5 in H - 17 in W - 15.5 in D - Seat Height 18 in

Pr PLYCRAFT Molded Plywood Side Chairs. Walnut plywood, flat tapered legs. Not marked.-- Dimensions: H: 33.75 inches: W: 18 inches: D: 19 inches ---

Oval backs with plank seats on a light blue painted enameled steel frame. Oxidation is present. 28"h x 17"w x 17"d

Dimensions: H 32" x W 17" x D 17" x SH 18" Condition: Showing light wear including scratches to seats, a few nicks to edges, and light pitting to metal legs.

Pair MID CENTURY MODERN BENT PLYWOOD SIDE CHAIRS.Italian Design, black paint finish.both good conditionSize: 30 h , 19 arm span width

Bent laminated plywood side chair. 27"h x 19"w x 16"d

EAMES FOR HERMAN MILLER PLYWOOD SIDE CHAIR. WEAR TO FINISH. 22" W x 24"D x 26" H. THIS ITEM EXCEEDS SIZE LIMITATIONS FOR IN HOUSE SHIPPING.

Early production DCM oak bent plywood side chair with factory black metal frame. Designed by Charles and Ray Eames. Manufactured by Herman Miller. Circa 1950. Dimensions: H 29" x W 19.5" x D 20.5" x S

FRITZ HANSEN for ARNE JACOBSEN Ant Chair. #3103. Molded Plywood Side Chair. Black Metal Base. Marked-- Dimensions: H: 31 inches: W: 21 inches: D: 19 inches ---

Charles Eames designed for Herman Miller molded plywood side chair, signed with metal tag Designed by Charles Eames Herman Miller Zeeland Mich on underside of chair seat, circa mid 20th c., 30" (h) x

Bent plywood side chair, painted black, style no. 1311-s17, labeled. 30.5"h x 17"w x 20"d, seat height 17.5"

Birch bent walnut plywood side chair on steel legs. 32"h x 17.5"w x 19"d

Pair of Charles Eames for Herman Miller molded plywood side chairs, labels on bottom of seats, 29 1/2" high x 19 1/2" x 20"

Designed in 1955. Attributed to Oswald Haerdtl for TON. Two plywood side chairs with orange floral seats. 17"w x 18.5"d x 32.5"h