Single Chime Brass Locomotive Whistle

A small brass whistle with accompanying pump air chamber, made in brass and copper. Single-chime brass whistle measures 7" high with pointed hex finial. Pump air chamber measures 4" diameter with wood

A single chime brass whistle by Crane Company measuring 10 1/2". Crane 125 is cast into the valve body. Some minor nicks along the top edge and a few spots of rust but no major condition issues to not

Three Chime Brass Steam Locomotive Whistle Whistle measures 11 1/4" tall with a 4" diameter bell. The inlet size is 1 3/4". The bell has an 1 1/2" shallow dent near the top and other minor areas of pi

Single Chime Brass Steam Whistle Single chime brass steam whistle measuring 9 1/4" tall with 3/4" inlet. Nice condition with a more ornate acorn. Red paint on the body has been restored and no additio

Provenance unknown, but came from Northwestern United States and resembles Northern Pacific RR whistles of that time period. 5" diameter shroud, replaced valve and a nicely repaired acorn finial. Fits

Lunkenheimer 3 1/2 Single Chime Steam Locomotive Whistle The valve body is marked Lunkenheimer on one side w/ 3 1/2" on the other side of the body. The lever is case with Pat. Mar. 26. 1918 on one sid

Norfolk & Western Railway "Hooter" Whistle. All brass whistle single chime whistle from the N&W Railway. These famed whistles earned the nickname of "hooters" for their distinctive sound they produce

2 total. Tallest Measures 11-3/4" x 2"

2"x9" brass single chime Lonergan steam whistle

Brass, single-chime railroad steam whistle, about 20 inches tall and 1-3/4 inches in diameter. Has two orifices but only one undivided resonating chamber above them. Windways are unobstructed. Brass s

Brass Steam Locomotive Three Chime Whistle Flat top long brass bell with underside pull lever, marked with the 'G' and '2' on the bottom edge, reportedly from the Illinois Central Railroad 2-10-2 engi

A double 2" brass whistle assembly. It has a brass junction with "T9233W" cast in raised lettering. One whistle is 2" by 3 1/2". The other is 2" by 6". Both whistles are single chime and both have fin

A massive brass 3 chime whistle that stands 19" tall without the finial. It has a 6' diameter. The delivery pipe is a 2" diameter. The control arm is loose. It clearly needs some cleaning but it's a b

Canadian and American. 1920s-1930s. Brass. Marked, "Auto chime midget Pat'd May 22 1906 Gray-Howley-Detroit", in the base casting of one whistle. Marked, "Penberthy", in the base casting of second whi

Brass 6" diameter with 12 1/2" chamber length. Acorn finial, no markings. It is mounted on a wooden base with room for another whistle on the stand. The whole unit stands about 23" tall. The control a

**For an in-house shipping quote, please reach out to us at rockauctiongallery@gmail.com** Railroad steam whistle by an unknown manufacturer. This item is likely brass, but has been tarnished over tim

A brass 5 step Nathan style whistle with AT&SF cast into the top. A beast that is mounted on a rolling wooden base. This is not a common item. Black paint on most of it. A dent in the base plate on on

A fine example of an uncleaned Nathan 5 step whistle that has been sleeping in a barn for 40 years. It's heavy. Basic measurements: 18" total height (14" without top nut and base plumbing). 3 7/8" bas

A heavy brass whistle with decades of junk from sitting on the floor of a shed. It has 5 graduated steps / chambers. The basic body stands 11 1/5" tall. The circumference is about 21" so the diameter

Possibly a Hancock three-chime locomotive whistle. This whistle has the valve still attached, which makes it unique. It also has the original support/mounting bracket still attached which is why it ap

Canadian National 4-8-4 Northern McAvity Five Chime Steam locomotive Whistle. The whistle measures nearly 30" tall and has a 6" diameter. The whistle was purchased direct from the Canadian National in

A Brass Locomotive Steam Whistle 20th Century mounted to a metal base. Height 29 1/2 inches.  Property from a Midwest Collector

Three Chime Brass Steam Whistle. Measures 18 1/2" from end to end. 1 1/2" inlet. The diameter of the bell is 5 1/2". There are no stampings, casting numbers, etc. on this whistle. It is completely unm

This is a Lunkenheimer three inch, three chime steam whistle. Dome top, with a patent date of June 7, 1892 on the base. Nice original piece, complete with lever.