WEEDEN PIONEER NO. 121 LIVE STEAM MODEL.

Vertical style with burner on bottom. Cast iron base. Nice detail. Condition: (Very Good). Dimensions: 10 - 1/2" x 10" x 7".

American. 1920s. Brass, steel, and cast iron. 6 x 7 x 6". Mechanically functioning. CODE:TOY

Both vertical and with original stacks. The smaller one, a No. 2 brass model, has burner. The larger is a No. 67 model and has a side burner, nothing down below. Condition: (Very Good - Excellent). Di

Live Steam Vertical Engine Model 19 x 12 x 12-1/2 inches (48.3 x 30.5 x 31.8 cm) on a 2-1/2 inch base HID03101062020 © 2020 Heritage Auctions | All Rights Reserved

This electrically heated model steam engine was manufactured by Weeden. It consists of boiler with flywheel and power cord. The filler cap is missing, but the sight glass is present and intact. Measur

3-Inch Live-Steam Model of a Wallis & Steevens Simplicity Roller, c. 1980 Coal-fired model of this unusual street roller by Wallis & Steevens of Basingstoke, England, with distinctive 5 1/3 in. diagon

2-Inch Live-Steam Model of the Steam Roller "Victoria", c. 1970 Model of the 8-ton 'C' class roller built by Aveling & Porter Ltd of Rochester, Kent, coal-fired, with reversible two-gear transmission,

A scale live steam model of a showman's traction engine, A scale live steam model of a showman's traction engine, 96cm long 40cm wide 57cm high Provenance: The Gordon Gridley Collection, London. Condi

1 1/2-Inch Scale Live-Steam Model of a Traction Engine by Allchin, c. 1975 Working model of the British Allchin "Royal Chester" single-cylinder engine, steel, cast-iron and brass construction, coal-fi

Includes original boxes and outside shipping box. It is an Accucraft SP Daylight GS4 No. 4449 engine and matching No. 4449 tender. Very little wear. Toy (Excellent). Boxes (Very Good).

1900. Reputed to be one of the 1st production toy automobiles. It is hand-painted tin with a live steam engine, 8 inches long. It has iron and wire wheels with its original burner . The stampings are

Enamel pressed steel, 18” long with live steam engine. It retains its burner and appears complete, showing light playwear. Would benefit from a cleaning. Nice example! From the Clint Miller Collecti

1-Inch Live Steam Model of a Steamroller, c. 1990 Maxwell Hemmens, Engineers, Thorganby, York. Reversible, 2 gears, steerable front axle with chains, parking brake, manometer, feed pump, rope winch, d

A live steam model of a Stuart Turner Major Beam engine, with beam supported on bright-work turned central pillar with Watt s parallel motion linkage to single vertical cylinder 1 3/4" bore by 3 3/4"

Circa 1910. Enamel-painted pressed steel, 18? long with live steam motor. It retains its burner and appears complete, showing light play wear. Would benefit from a cleaning. Nice example!From the Harl

1 ½-Inch Scale Live-Steam Model of a Traction Engine Large working model of the British "Bert" traction engine, coal-fired, single-cylinder engine, Stephenson's slide-valve gear, two-speed gearbo

Aster Gauge 1 live steam model electric version locomotive Climax in original box, locomotive and tender are C8, extremely nice and clean, displayed only, comes in nice original box and foam packing,

3 Gauge I Live Steam Model Locomotives 1) Class 99011, tank locomotive, Regner Dampftechnik in Aurach, factory-built gauge of a Palatine PtS 2/2, gas-fired, 2 outer cylinders, unfired condition, lengt

Live-Steam Model of a 6-Column Beam Engine, c. 1985 England, all-brass construction, with 6 pillars supporting an overhead walking beam with parallel motion, single-cylinder, Ø 1 1/3 in., spoked 5

Live-Steam Model of a 6-Column Beam Engine "Lady Stephanie", c. 1985 With maker's plaque "Kølsen Maskiner, Danmark, No. 051", brass, steel and cast iron, 6 brass pillars supporting an overhead walk

Vintage Hobbies Bowman Steamboat, speedboat "Swallow". With original wooden box. Made in England. Length 20".

Painted tin with live steam motor. Unusual 20” length with 2 stacks. It has been nicely restored, but a bit dirty from display and 1 rudder support is apart. From the Clint Miller Collection.

Painted tin with live steam motor, 16” long. It has its cork & appears complete, showing light to moderate playwear. From the Clint Miller Collection.

A nickel plated Weeden live steam, steam roller with brass roller, 8.5”H x 7”L.