White Eames Aluminum Group table

A 1960's Herman Miller "Aluminum Group" breakfast table designed by Charles Eames. Circular White Formica top on a White stem and four legged Aluminum base. Some wear and minor surface damage. 35 1/2"

Herman Miller, Charles & Ray Eames (American, 1907/1912-1978/1988) Mid Century Modern Dining Conference Marble Top Aluminum Group Table. Circa 1970. White Italian marble top over an aluminum base. Mea

With Herman Miller label underneath. White laminate top with aluminum group base. Dimensions: H 28.5" x Dia 47.75" Condition: Few scratches and scuffs to top.

Herman Miller, Zeeland, Michigan; cast aluminum, enameled steel; the table: with formica top, unsigned (29 x 48 in.); the chairs: with cast Herman Miller label, each covered with grey fabric (Two loun

Herman miller tag underneath. Dimensions: H 28.5" x W 72" x D 42" Condition: Some light scratches and watermarks to surface. Some chips dings and scuffs to edges. Light wear to base.

Charles and Ray Eames Aluminum Group table Herman MillerUSA, c. 1965 / c. 1980walnut, cast aluminum, enameled steel, rubber, plastic 26.5 h × 35.5 dia in (67 × 90 cm) Signed

Description - Charles Eames Aluminum Group occasional table. Dimensions - 26" x 30"

Charles & Ray Eames 'Aluminum Group' dining table and four chairs, ca. 1977 Table: maple, cast aluminum, enameled steel, rubber, plastic; chairs: cast aluminum, vinyl. Manufactured by Herman Miller, U

Dining table, Herman Miller, USA, 1964/1978. Aluminum, enameled aluminum and steel, walnut veneer, and nylon. 41.5dia x 26h

Herman Miller, Zeeland, Michigan; cast aluminum, enameled steel, laminate; unsigned 16 x 36 in. (40.6 x 91.4 cm.) Provenance: Property from The Watt Estate's Harbor Island Time Capsule, Newport Beach,

4 White Mesh Eames Aluminum Group for Herman Miller . Aluminum Group Chairs were Originally developed in 1958 as a special project by Ray Eames

4 White Mesh Eames Aluminum Group for Herman Miller . Aluminum Group Chairs were Originally developed in 1958 as a special project by Ray Eames. 22.5 L x 23" D x 32.5 overall H x seat Height 19”

Charles and Ray Eames designed aluminum group table and base. Melamine top, aluminum base. Manufactured by Herman Miller. 28" tall, 29.75" diameter. Herman Miller label under top.

Charles Eames (1907–1978) for Herman Miller Aluminum Group table, #5557 Zeeland, Michigan laminate, metal signed with metal tag 42"dia x 30"h

Charles & Ray Eames for Herman Miller Pair of Aluminum Group rolling end tables Design circa 1958, production circa 1989 Aluminum, oak veneers Each 29 1/2" x 30" x 24" Tagged to th

Charles & Ray Eames for Herman Miller Pair of Aluminum Group rolling end tables Design circa 1958, production circa 1989 Aluminum, oak veneers Each 29 1/2" x 30" x 24" Tagged to th

A Center Table. Round wood table top beneath a stainless steel clad wood pedestal base. Together with a set of four tan leather and aluminum Eames Group chairs Table: 29.5" x 42"

An Eames for Herman Miller Conference Table. Together with a set of six tan leather and aluminum Eames Group chairs Table: 28" x 72" x 36"

From the Eames Aluminum Group this white mesh dynamic rolling chair swivels and raises. By Vitra. Back height extends from 33" to 39"

Herman Miller Eames walnut round table. Aluminum group. Labeled. Dimensions: H: 29 inches: W: 54 inches: D: 54 inches ---

A vintage Charles and Ray Eames for Herman Miller Aluminum Group large round table having rosewood veneer top and steel and cast aluminum base. 'Herman Miller' sticker and serial number '405821' on un

Description - Pair of Charles and Ray Eames for Herman Miller Aluminum group marble side table. Dimensions - 17.5" x 30"

Charles Eames (1907-1978) & Ray Eames (1912-1988) for Herman Miller, Aluminum Group coffee table, USA, Italy, 1960s, Italian marble, aluminum, enameled steel, wood, nylon, signed, 35.5"w x 35.5"d x 16

Herman Miller mid century modern aluminum group white laminate top dining table, 30"d