Antique Half Model of a Sloop

Boat half model. This is an architects builders model for a sailing sloop. Quite nice with eight lifts. Mounted to a wood board. 9 lbs. 8"H x 6"W x 34"D.

Fine antique laminated half model of a sailing sloop with five lifts, cockpit at stern, stubbed mast, rudder, etc. Fine patina, mounted to original backboard

Large old laminated wood half-hull model of a South Shore of MA boat initialed GFH. 33 in long x 7.5 x 5.5 in deep.

Antique half ship model diorama, carved and painted wood and string, unsigned, 14-3/4" x 25-3/4" x 2-1/2", good condition

Antique half ship model diorama, carved and painted wood and string, unsigned, 18" x 28-3/4" x 2-3/4", good condition, one loose piece

Antique half ship model diorama, carved and painted wood and string, unsigned, 13-3/4" x 23-1/2" x 2-3/8", good condition, 2 small loose pieces

Half Hull Model sloop made of wood on wooden plaque. On rear this model reads: "One piece pine sloop, much like catboat." On reverse: "Warren, R.I.C., circa 1880, with original backboard." Dimension

This pine half model of a sloop yacht is set on a shield shaped, plywood backing. The model is secured with brass screws.

Antique carved half model of a yacht. Graceful lines. Weight is 4 pounds. 3" H x 28" L x 5" Deep.

Circa 1890 carved and painted wood half hull model (laminated) with original surface. Small piece of wood backboard missing on end. Overall 43 in long x 9 x 5 d. Possibly a Fall River Steam passenger

Half Model of a Sloop, Carved Wooden Sails. Overall size: 24 x 19 inches.

MOUNTED HALF HULL MODEL OF A SLOOPLate 19th CenturyBlack hull with bronze bottom.Backboard 13.25" x 42".

M/V Miller Freeman Fisheries Research Vessel Hull 879 with Coast Guard letter and plaque. Good overall condition with some light edge wear. Includes bolts for mounting. Measures at 60" x 11 1/2" x 7"

Antique painted wood pond model of a sloop with lead keel and original paint, 47 in long and 6.5 in wide.

Large Antique Wooden Half Hull Boat Model,4ft Long, Wall Hanging. This is a half hull boat wall hanging made out of wood. The bow and stern of the boat both have a distinctive point at the end, while

Antique/Vintage Half Hull Sailboat Model Plaque, mixed media construction, metal sails, carved wooden hull, molded ocean and painted back drop mounted on board. 16.25 in. x 25 in.

Nautical half hull boat ship wall sculpture. Hand crafted solid wood. Mounted to a 9" x 29" clear panel. Half hull measures 25" x 4" x 2.5". Apparently unsigned. SHIPPINGHill Auction Gallery will not

lot of 2 antique boat maker's half hull ship models mounted on mahog plaques - 10"x22" & 6 1/2"x22"

Antique Louise schooner wooden half hull model measures approx 45.5" L x 14.5" x 17.5". On a plaque that says "Louise built in 1872 - 984 tons". Has minor loss. There is also a framed black and white

TWO MOUNTED BUILDER’S HALF HULL MODELS19th Century1) Sloop built up in nine lifts. Applied skeg and rudder. Backboard 7.75” x 25.5”.2) Ship built up in eight lifts. Inscribed on back

Antique Painted Cast Iron Half Hull Boat Model. Painted white with a red strip on the bottom of the boat, with fantastic patina.Dimensions are 4.25 in h x 12.25 in w x 2 in d. Condition is fair/as is.

MOUNTED BUILDER'S HALF HULL MODEL OF A SHOAL DRAFT SLOOPAmerica, Late 19th CenturyHull built up in eleven lifts of alternating yellow pine and mahogany. Mounted on a later white-painted backboard.Back

Rigged Half-Hull Model of a Gaff Rigged Sloop, circa 1900, carved and painted hull with cardstock sails, cotton string rigging, set into a blue painted shadowbox with walnut molded frame, 19 1/2" x 20

DESCRIPTION: Model boat mounted against a mirror beneath a bow front glass pane. Model comprises half of vessel; mirror reflects model to give illusion of a full model. CIRCA: 20th Century DIMENSIONS: