Laminated half-hull model of steamship Iris with

Circa 1890 carved and painted wood half hull model (laminated) with original surface. Small piece of wood backboard missing on end. Overall 43 in long x 9 x 5 d. Possibly a Fall River Steam passenger

Vintage wood half hull model of a side paddle steam ship SF ROTHSAY BUILDER, MCKAY & BEGG, GREENOCK. 37.5 in long x 9 in high.

Laminated pine half-hull model, 19th c., mounted on a walnut backboard. 9.5"h.x38"l.x6"d.

Laminated pine half-hull model mounted on a mahogany backboard. 9"h.x32.25"l.x5.5"d.

TWO LAMINATED PINE HALF HULL MODELSLate 19th/Early 20th CenturyUnmounted.Lengths 30" and 30.25".

Large old laminated wood half-hull model of a South Shore of MA boat initialed GFH. 33 in long x 7.5 x 5.5 in deep.

hull, 68”; backboard measures, 12” by 72” wood plaque reads: Hesper/ Built by Crowninshield, S. Somerset/ Mass. in 1918/ 210 ft./ The last four masted schooner/ in America/ One of the Wiscasset

BUILDER'S HALF HULL MODEL OF THE SAIL/STEAM SHIP "LUZON"Circa 1864By Alexander Stephens & Son Shipbuilders, Linthouse, Govan, Scotland. Hull built up in ten lifts. Bottom finished bright and

AMERICAN HALF-HULL SHIP MODEL, laminated pine mounted on a pine board with applied molding. Old refinished surface with warm color. Late 19th/early 20th century. 11 1/2" x 55 3/4".Provenance: Property

AMERICAN HALF-HULL SHIP MODEL, laminated pine mounted on a walnut board. First half 20th century. 19" x 36".Very good condition with minor wear and scratches.

A Nautical Half Hull Model 20th Century identified as the SS Cedartree / Built by John Crown & Sons Ltd - Sunderland / 1928 / For / The Tree Steamship Co Ltd / Howard - Jones Ltd Managers / Cardiff. h

An all wood half-hull model of the yacht TERPSICHORE, the riggings depicted by thin wood pieces and cotton string, laminated half hull, painted lettering of Herbert White and "White Brother Itchen", a

(3) Half Hull Models of America's Cup Winners, incl: America - 1851, in two-tone laminated mahogany, mounted on a two tone wooden back panel with molded edge, brass plaque reads 'America - 1851- USA,

20th century. The hull carved from a solid pine laminated board. The hull painted green above the water line with natural finish below. The rudder applied to the hull. The green backboard with the nam

Completely annotated with construction details. pine with a darker wood laminated into the bottom of the hull. 8 1/2 x 50 x 7 inches

Carved half model of the yacht Aileen Booth by Alexander Dorman. Laminated hull with clear varnish finish. The wood species are varied above and below the waterline. Mounted to a teak backboard. Dimen

MOUNTED BUILDER’S HALF HULL MODEL OF THE STEAM/SAIL YACHT “RAMACE FERGUSON”Late 19th CenturyBuilt up in six visible lifts. Black hull with natural wood bottom. Identifying plaque on

White nautical ship builder's half hull boat model. This large boat model is the perfect statement piece for anyone who loves boating or the craft of boat making. The piece can hang on the wall. The d

Large Half Hull model. "The Great Surgeon". Together with and early photograph of Dr. William H. Thorndike. Known as "The Great Surgeon" for whom the boat was named. Boston area, circa 1880. Condition

H E BOUCHER HALF HULL MODEL, BOAT MEASURES 55" LONG, ON MAHOGANY BOARD, STAMPED ON BACK, AS PICTURED, FROM BROOKLYN NEW YORK ESTATE

MOUNTED BUILDER'S HALF HULL MODEL OF THE DOWNEASTER "ST. JOHN"America, 19th CenturyBuilt up in eleven alternating pine and mahogany lifts. Small carved billethead below bowsprit.Dark green b

ALDEN MOUNTED HALF HULL MODEL OF A COAST GUARD CUTTERFirst Half of the 20th CenturyBuilt up in five lifts. Hull with extensive builder's markings.Backboard 10" x 55".Provenance:Northeast

MOUNTED BUILDER’S HALF HULL MODEL OF A WORK BOAT20th CenturyBlack hull with green boot and red bottom. Plaque marked “‘S.T. Brahman’ & ‘Krooman’”.Mahogany bac

19th century, overall 50" long, 10" tall, 5" deep.