Buckeye Brass Three Chime Steam Valve

By Buckeye Brass Works - Dayton, Ohio. Approximately 14" long

Buckeye Brass 3" Diameter / 12" Tall Three Chime Steam Whistle Three chime Buckeye Brass Works three chime steam whistle. The whistle is stamped Buckeye Brass Works Dayton O at the top edge. Whistle m

Gee Cee Three Chime Brass Step Top Steam Whistle Whistle measure 8" tall with an 1 1/4" inlet. Side of the hex on the valve stamped with Gee Cee Co. PT Huron M. Valve moves freely and no notable damag

Three early 20th century American Brass steam whistles. Largest by "Buckeye Brass Works, Dayton, O" and smallest by "American Steam Gauge and Valve Mfg. Co. Boston U.S.A.". Some surface wear and pitti

Brass, three-chime railroad steam whistle, about 15 inches tall and 1-3/4 inches in diameter. Has three orifices, each with its own resonating chamber above it. Windways are unobstructed. Brass surfac

Three Chime Brass Steam Whistle. Measures 18 1/2" from end to end. 1 1/2" inlet. The diameter of the bell is 5 1/2". There are no stampings, casting numbers, etc. on this whistle. It is completely unm

Three Chime Brass Steam Locomotive Whistle Whistle measures 11 1/4" tall with a 4" diameter bell. The inlet size is 1 3/4". The bell has an 1 1/2" shallow dent near the top and other minor areas of pi

This is a Lunkenheimer three inch, three chime steam whistle. Dome top, with a patent date of June 7, 1892 on the base. Nice original piece, complete with lever.

Brass Steam Locomotive Three Chime Whistle Flat top long brass bell with underside pull lever, marked with the 'G' and '2' on the bottom edge, reportedly from the Illinois Central Railroad 2-10-2 engi

Dayton Ohio, Stamped 24, 13 3/4"x3 3/8" Whistle, Total Dimensions 14"x5 1/2" with Handle, 1 1/8" ID

Crosby Three Chime Steam Whistle Crosby Three Chime Steam Whistle. Bowl of the whistle is stamped with Crosby Steam Gage & Valve Co. Boston USA. Measures 3 1/2" diameter and 13" tall. Whistle has one

Powell Three Chime Baldy Steam Whistle Powell 3" diameter three chime baldy steam whistle with a 1" inlet. Whistle is 10 7/8" tall and is in good condition. Powell is stamped on the valve body. The le

3" Lunkenheimer Three Chime Baldy Steam Whistle Lunkenheimer 3" diameter three chime baldy steam whistle with a 1" inlet. The whistle is in good condition, restored red paint, no valve. The whistle is

A nice three chamber brass whistle. It has a large 6" diameter, 12 1/2" tube, 20" total height including top to feed pipe entry. It is big and heavy. It has a long "Crosby Steam Gauge Valve Company B0

A nice three chamber brass whistle. It has a 5" diameter, 10" tube, 16" total height including top to feed pipe entry. It is big and heavy. It has a long "Crosby Steam Gauge Valve Company Boston Mass

A Lunkenheimer bronze three-chime whistle. The bell measures 6" in diameter and 23" tall to the top of the acorn finial. There is no valve hardware. It is mounted on a 5 - 1/2" pipe flange for display

Three (3). American. 1920s-40s. Includes: 6" (l) 2.5" (d) Lunkenheimer "wildcat", Buckeye Brass Works 8" (l) 3.25" (d) 3-chamber fluted and Penberthy 5.25" (l) 3" (d) whistle. Center whistle stamped,

A bronze three-chime whistle with integral valve and actuation lever. Whistle measures 2" in diameter. Has an acorn finial and is mounted on a nice wood stand. Plumbed with a quick-disconnect on the s

A brass steam whistle by Buckeye Brass Works in Dayton, Ohio. It has a 2 1/2" diameter, 5 1/2" cylinder and it stands 14 1/2" tall overall. It has a fine acorn finial. There are a few dings. The Bucke

American, likely 19th century. Military brass three valve cornet musical instrument with rounded tubes culminating in horn with winged eagle under undulating ribbon with motto "E PLURIBUS UNUM" (Out o

rated 9, 13"L, the brass three-chime horn has been polished, is stamped on the base.

13.5x1.75" example. Unmarked

Brass safety valve made by Crane Co. Body is cast with Crane MS and stamped with 2590 on the inlet. The inlet is 2 3/4" diameter. Tool marks on the nut and some paint loss. Valve is 12 3/4" tall.

Twenty-five (25). American. 1910s-20s. Various markings include, "Detroit Lubricator Co. Detroit, USA", "Williams Ohio", "Penberthy", "Lube Devices Inc". 2 to 9.75" (l). Minor oxidation, tool marks.