CUSTOM 3 PART MAHOGANY DINING TABLE

Fine quality custom mahogany triple pedestal dining table. Each section is 35 in long and the center portion can be removed, total length 105 in by 48 in wide. Plus 2 large leaves at 22 in wide. About

Late nineteenth century three part mahogany dining table. Demi: 29.5" x 42" x 20.5" Mid: 29.5" x 42" x 19.25" Opened: 29.5" x 99.25" x 19.25"

19th C 3 Part Mahogany Dining Table . 111 1/2" L 47 3/4" D 28 1/2" H ALL DESCRIPTIONS AND ANY CONDITION STATEMENT GIVEN BY LANGSTON AUCTION GALLERY ARE STRICTLY OPINIONS AND LANGSTON'S SHALL HAVE NO R

A solid mahogany Duncan Phyfe period 3 part mahogany dining table with splayed legs with carved knees and brass paw feet. Each section has brass U shaped clips to connect. Each section is 34 in long (

approx 54" long without leaf

A fine American Federal period Three (3) part mahogany dining room table in the manner of Duncan Phyfe. Fine brass paw feet and acanthus carving. Dimensions: 99" X 47" X 30" and Two (2) leaves 22", 17

Impressive 3 part banded burl mahogany dining room/banquet table with (2) 22" leaves, has veneer loss on sides, top has minimal wear, book match grain approx. 121" w x 48" d x 30" h Opens to 165" w

3 part straight leg Chippendale mahogany dining table. 107" long x 48" wide x 29" tall.

Custom mahogany two part dining table with double pedestal base and two 17 inch leaves. height 29 1/2 inches, top closed: 47" x 66", top open: 47" x 100" *No credit card payments will be accepted for

Mahogany Diminutive 3 Part Dining Table (Unsigned Craftique). 62 1/2" W 23" D 18 3/4" H

20th C. comprising demi-lune tables, with a central drop leaf table. Overall: 29-3/4"h x 5'6"w x 4'4"d, each drop leaf 20"w

20th C. comprising demi-lune tables, with a central drop leaf table. Overall: 29-3/4"h x 5'6"w x 4'4"d, each drop leaf 20"w

19th c. two part mahogany dining table. Each section 42 3/4" x 19" with attached 20" leaves, 30" Ht.. Barbara Packer Collection.

19th C Mahogany Banded Top 3 Part Dining Table W/4 Leaves. 149 1/2" W 47 1/2" W 28 3/4" H

2 part Mahogany dining room table with 2 leaves, each section is 51 3/8" by 21.75", attached drop leaf is 21.5", two separate leaves are 36" wide (!) each, comes with "H" brackets.

Beautiful Vintage Baker Furniture banded mahogany quad leg pedestal base dining room table in good condition, some surface wear but no deep scratches or gouges, has 3 leaves and custom table pads appr

probably American, early 19th century, mahogany with pine secondary, center section with two drop leaves, 28-1/2 x 49-3/4 x 117 in.  Â

In 3 parts with 2 leaves, rich mahogany with reeded top edge, 3 sturdy pedestals with reeded downslope legs on brass paw caster feet, 28.5” H x 48”Dx 9’7” L with 2 leaves added

Regency Mahogany Two-Part Dining Table, Early 19th C. Dimensions: 28 3/4" H x 53 1/2" W, without leaves 54" L Property from the Estate of Carter Bales (1938 - 2019), Centre Island NY (CABA478)(MS)

Mahogany Inlay Custom Made Three Part Dining Table. 169" W 48 1/4" W 30 1/2" H

BAKER BANDED MAHOGANY INLAID DINING TABLE & (8) CHAIRS, DOUBLE PEDESTAL, WITH (3) 18 INCH LEAVES IN CUSTOM STORAGE VINYL BAGS. WITHOUT THE LEAVES THE TABLE MEASURES 70" LONG X 46" WIDE X 29.25" HIGH.

Property De-Accesssioned from the Telfair Museums, Savannah, GA Description: George III Mahogany Drop-Leaf Table, Late 18th C, probably the center section to a 3-part dining table, the rectangular

Custom Mahogany Dining Table, having banded inlaid top, along with two leaves, height 28 3/4 inches, width 44 1/2 inches, length 67 3/4 inches, (one small chip on top).

Baker Furniture burl mahogany top black frame dining room table with (3) 14" leaves and custom table pads Dimensions: 54" l x 46"w x 29" h with (3) 14" leaves table opens 96"