Steam Locomotive Bell - 12" tall, 15 1/2" diameter, mounted on base with Yoke

Older steam locomotive bell with 2 concentric rings on the bottom edge. The cast Iron yoke has some casting marks that are hard to read. This bell does not have any shop stamps. Including the rolling

A very heavy steam locomotive bell with (15" diameter and 12" base to top dimensions. Mounted on a rolling base. Air ringer is untested. Loads of shop stamped numbers on top, please see the pics. You

Nice condition Antique steam locomotive 12" bell with cast iron yoke. The bell measures 12" in diameter x 10" tall, the yoke measures 25" tall x 18" across and is maked 26421 & 4956.

12" bell diameter. The cast yoke 19-1/2" tall. Lehigh Valley Steam Locomotive Bell. Pat. Pending

A large steam locomotive bell. It has a 17" diameter and the actual bell is 12" high. The cast iron yoke has 2 casting marks: base has 65697 (note "5" is upside down), top has 24139. I did find any sh

A very heavy steam locomotive bell with an 11 1/2" diameter and 9" height to the base casting. Overall with yoke it is 21" tall. Mounted on a rolling base. No casting marks or shop stamped numbers on

Brass 6" diameter with 12 1/2" chamber length. Acorn finial, no markings. It is mounted on a wooden base with room for another whistle on the stand. The whole unit stands about 23" tall. The control a

HAS DRAGON HANDLES--15 1/2" DIAMETER X 12" TALL--MOUNTED ON WOOD BASE--HAS SOME TARNISHING

A heavy little bel with 12" diameter. It also stands 9" on the bell height. With the yoke it measures 25" tall. It mounts flat (not a curved boiler). It is probably from a gas car or electric locomoti

Bell is approximately 12 in in diameter mounted on a metal base and is approximately 23 in tall. Has a great sound!!

12" diameter x 18.5" tall with cast yoke and acorn finial

12" diameter x 18.5" tall in triangular yoke

Approx 14 1/8" in diameter and 12 1/2" tall ( when not mounted on yoke). NO SHIPPING

Look past the paint! The yoke has HOWARD cast twice: once up top and larger on the base. The bell measures 9" high by 12" diameter. The total height with yoke is 19". It has both a pull arm and a air

12" bell diameter. The case yoke is 20" tall with acorn finial.

A large and heavy steam locomotive bell. It has a 17" diameter and it measures 12" high with a total height of 14" to the top of the mounting fitting. The cast iron yoke measures 17" bottom to top whe

Railroad bell is air powered. Bell is approx 12" in diameter and 10 3/4" tall. It is mounted on a rolling stand. No shipping.

The brass or bronze bell with red interior and measuring 12 7/8 inches at the widest point is suspended in an iron yoke and cradle on circular base with iron crank and acorn finial at the top, unmarke

Blue & Silver iridescent glass lamp. signed and dated 1993 underneath base, shade 8: diameter, overall 15 ½” tall including finial.

American/Japanese -1980s to 1990's - 12" / 15" Tall. The copper one mounted to a plastic base is a radio. Very Fine Condition. ***Domestic shipping for this lot will be $25, International shipping to

14 1/2" Diameter Brass steam locomotive bell. The bell is polished brass with a repainted red interior. Equipped with a Trans Devices ringer. The bell itself is otherwise unmarked. The yolk has 12 V S

Standing Man, large carved and painted wood statue with shells, rope and grass appointments mounted to composite base, overall 66 ½” tall, 18” diameter composite base, approximately 4

A 24" FIGURAL PORCELAIN VASE MOUNTED ON A BRONZE BASE, 26.5" TALL X 12" DIAMETER

United States,20th Century Carved then laminated bowl with undulating smooth rim with buttocks form base.Wood 12" tall x 15" diameter, From the collection of a Medfield, Massachusetts gentleman.